THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    introducing the 45/70 NITRO
Page 1 2 3 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
introducing the 45/70 NITRO Login/Join
 
Moderator
Picture of jeffeosso
posted
(george, please don't shoot me at the end of the month)

It's been done before... Maybe, but it's cheap.

What is it?
Nothing but a long throated 45/70, 3.162 OAL

WHY? jeffe, WHY?
To shoot barnes 450gr TSX bullets in high proof 45/70s

Okay, i'll ask again, WHY?

Because I am CHEAP

Here's the deal,
If you take a 45/70 and load it to 2.55 with this bullet, you have 35gr of usable case left.
At 3.162, that leave .458 in the case, and 60gr of useful capacity. (the winmag has about 66gr at nominal length) Using 45/70 dies and brass.. and if you have a handful of PMC ammo, it goes band. No 3" or 45 RCBS dies and brass.. it's "JUST" a 45/70.

What's the difference in performance?
at an estimated 47500psi, the 450 TSX goes 2000fps in the 45/70 Nitro

In the 45/70 "govt" same bullet, abotu 1640.


Yeah, I am planning this for the spartan, but my handirifle will be a decent test bed



opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40084 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Moderator
Picture of Paul H
posted Hide Post
stir

Too slow around here for you huh?


__________________________________________________
The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time.
 
Posts: 7213 | Location: Alaska | Registered: 27 February 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Paul,
just waiting for the spartans!!

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40084 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by jeffeosso:
(george, please don't shoot me at the end of the month)

Would sometime this weekend be OK with you?

animal


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
Moderator
posted Hide Post
Jeffe,


I think I'm going to load up some 'special' .470 Capstick rounds for you to shoot at the end of the month. BOOM

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
One of Us
posted Hide Post
jeff,
Just got back from Alaska and while there we stopped by a gunshop...seen one of those Spartans......YIKES Eeker. They look to be thrown together.
 
Posts: 609 | Location: Cincinnati | Registered: 25 December 2005Reply With Quote
One of Us
Picture of JMJ888
posted Hide Post
quote:
What is it?
Nothing but a long throated 45/70, 3.162 OAL


Might be interesting to try in say a 458 Lott on a Ruger #1.
 
Posts: 438 | Location: Houston, Texas | Registered: 27 December 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by AFreeman:
jeff,
Just got back from Alaska and while there we stopped by a gunshop...seen one of those Spartans......YIKES Eeker. They look to be thrown together.


A sighting!!!! They do exist!!!!!!! Well glory be! dancing
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
one of us
Picture of Hog Killer
posted Hide Post
I'll feed mine a steady diet of Remmy 405s. @ 2.82" OAL, 2000 - 2100fps. PIGS ARE GOING TO DIE HARD. jumping

Now what of 450gr NF CP, and big black bovines stir

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
 
Posts: 4553 | Location: Walker Co.,Texas | Registered: 05 September 2003Reply With Quote
One of Us
posted Hide Post
OK el jeffe! Could you do the same only with a 348 winnie aka 450 Alaskan?
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Hog Killer:
Now what of 450gr NF CP, and big black bovines stir

Hog Killer


"The weather calls for a brief SHIT STORM"! sofa
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
one of us
Picture of Hog Killer
posted Hide Post
quote:
Originally posted by .366torque:
OK el jeffe! Could you do the same only with a 348 winnie aka 450 Alaskan?


That would depend on what action type it was built on. The 45-70 Nitro is intended for the Spartan SxS, not a lever gun.

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
 
Posts: 4553 | Location: Walker Co.,Texas | Registered: 05 September 2003Reply With Quote
new member
posted Hide Post
I didn't need to do anything. I bought a bolt action Lee-Enfield #4 converted by Gibbs (others Gibbs did were only #1 mark III) to 45/70 with a 22" heavy "Navy Arms" barrel. It would take a 500gr JRN bullet loaded to a 2.93 OAL or a 550 gr very flat nose bullet loaded to 2.82. I never pushed the 500's beyond 1,750 fsp, however.
 
Posts: 38 | Location: Illinois | Registered: 04 December 2003Reply With Quote
One of Us
posted Hide Post
Hog Killer, that would be the rifle in question. Sorry I didn't clarify at first. I gave pause to realize just how many different configurations there are to launch a 45/70.
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
one of us
Picture of Hog Killer
posted Hide Post
quote:
Originally posted by .366torque:
quote:
Originally posted by Hog Killer:
Now what of 450gr NF CP, and big black bovines stir

Hog Killer


"The weather calls for a brief SHIT STORM"! sofa


You think? jumping

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
 
Posts: 4553 | Location: Walker Co.,Texas | Registered: 05 September 2003Reply With Quote
one of us
posted Hide Post
So? Why not rechamber to 45-90?
 
Posts: 1662 | Location: USA | Registered: 27 November 2003Reply With Quote
One of Us
posted Hide Post
As mentioned before, el jeffe is cheap (& so am I) and 45/70 brass is dirt cheap!
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
one of us
Picture of Zeke
posted Hide Post
quote:
Originally posted by jeffeosso:
(george, please don't shoot me at the end of the month)

It's been done before... Maybe, but it's cheap.

What is it?
Nothing but a long throated 45/70, 3.162 OAL

WHY? jeffe, WHY?
To shoot barnes 450gr TSX bullets in high proof 45/70s

Okay, i'll ask again, WHY?

Because I am CHEAP

Here's the deal,
If you take a 45/70 and load it to 2.55 with this bullet, you have 35gr of usable case left.
At 3.162, that leave .458 in the case, and 60gr of useful capacity. (the winmag has about 66gr at nominal length) Using 45/70 dies and brass.. and if you have a handful of PMC ammo, it goes band. No 3" or 45 RCBS dies and brass.. it's "JUST" a 45/70.

What's the difference in performance?
at an estimated 47500psi, the 450 TSX goes 2000fps in the 45/70 Nitro

In the 45/70 "govt" same bullet, abotu 1640.


Yeah, I am planning this for the spartan, but my handirifle will be a decent test bed



You messed up and said Handi-Rifle.



Excuse my ignorance(my Wife certainly does!)I have a BC. What is the preferred method to lengthen the throat to accmodate that nifty looking Barnes bullet?
This sounds like a perfectly logical waste of money and time to kill popcans. Count me in!

Let us know how it works out.



ZM
 
Posts: 655 | Location: Oregon Monsoon Central | Registered: 06 March 2004Reply With Quote
one of us
posted Hide Post
Zeke, I'm gonna do all of my .45-70 Handis and BC, they all have super short throats, cost is about $30 after all shipping is paid to rent a .458" throater. I've rented a .358" throater from 4D before to do my .35 Remington Handi, it takes about a minute or less to do it by hand, depending on how deep want to go.

Tim

http://www.4-dproducts.com/display.php?group=Throaters
 
Posts: 1615 | Location: Washington State | Registered: 27 May 2004Reply With Quote
One of Us
posted Hide Post
Just an observation here. Your cases look buckled at the base of the bullet. I've found this problem is solved by belling the case enough that the bullet seats in the neck without any "jiggling" of the press to seat into the brass.

Also, if you're going to "ream" a 45/70 Govt. why not just ream it out to 460 Weatherby?
 
Posts: 825 | Registered: 03 October 2006Reply With Quote
One of Us
posted Hide Post
Why not spend the money on hunting instead of on this? Confused
 
Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Why not a 450 alaskan? BC I am CHEAP!!! yes, you can get more out of that case.. but you can't use 45/70 brass and dies.. and would have to buy a $$$ reamer.

The cases where just made up from junk laying on the bench.

Dan
$120 MAX for the conversion reamer (and I already have a 45 throater).. so, in my case, I can prove concept for 15 mins of time, zero dollars...
cheers but I do find that comment kinda funny, considering your normal tastes in guns.

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40084 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
I might be interested in trying this in my Ruger #1. The only problem is that recoil is pretty brutal with max loads. It would be even worse with this modification!
Peter.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
 
Posts: 10515 | Location: Jacksonville, Florida | Registered: 09 January 2004Reply With Quote
one of us
Picture of Hog Killer
posted Hide Post
quote:
Originally posted by 500grains:
Why not spend the money on hunting instead of on this? Confused


Dan, for this kind of money, that would be squrrel, rabbit, or hogs. Spartan rifle, reamer work, and some ammo, will be LESS than the tip most folks give their PH on a DG hunt.

Besides, were else can you come up with a true SxS truck gun. Jackrabbits, boar hogs, and black bears would all be a FUN hunt with this set up.

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
 
Posts: 4553 | Location: Walker Co.,Texas | Registered: 05 September 2003Reply With Quote
one of us
Picture of Hog Killer
posted Hide Post
quote:
Originally posted by Peter:
I might be interested in trying this in my Ruger #1. The only problem is that recoil is pretty brutal with max loads. It would be even worse with this modification!
Peter.


sofaPeter, have you changed the recoil pad out on your #1?

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
 
Posts: 4553 | Location: Walker Co.,Texas | Registered: 05 September 2003Reply With Quote
One of Us
posted Hide Post
Hey, for $120 I could shoot 10 pheasants! Just offering possibilities...
 
Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002Reply With Quote
one of us
posted Hide Post
Hogkiller, no I haven't. Any suggestions? I don't think it is just the recoil pad. I think the stock configuration may be at fault, but having said that I am open to trying a different recoil pad.
Peter.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
 
Posts: 10515 | Location: Jacksonville, Florida | Registered: 09 January 2004Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Dan,
you must be a better shot than me?!?! I can't hit pheasants with an iron sighted big bore rifle!


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40084 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Moderator
Picture of Paul H
posted Hide Post
I keep eyeing the 12 ga coach guns, well actually the slightly longer ones with the screw in chokes. With rifled chokes they are a po-mans paradox, and there's always 00 if the regulation sucks.

I just can't get too excited about the 45-70 double. To me a 12 bore would be much more impressive. Hmm, gotta remember to pick one up Big Grin


__________________________________________________
The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time.
 
Posts: 7213 | Location: Alaska | Registered: 27 February 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by AFreeman:
jeff,
Just got back from Alaska and while there we stopped by a gunshop...seen one of those Spartans......YIKES Eeker. They look to be thrown together.


What shop? I Live in Alaksa and would love to see it. 45-70?


My biggest fear is when I die my wife will sell my guns for what I told her they cost.
 
Posts: 6654 | Location: Wasilla, Alaska | Registered: 22 February 2005Reply With Quote
One of Us
Picture of jwp475
posted Hide Post
quote:
Originally posted by Paul H:
I keep eyeing the 12 ga coach guns, well actually the slightly longer ones with the screw in chokes. With rifled chokes they are a po-mans paradox, and there's always 00 if the regulation sucks.

I just can't get too excited about the 45-70 double. To me a 12 bore would be much more impressive. Hmm, gotta remember to pick one up Big Grin



Espessialy with Dixe Hard cast slugs or Tri-Bucksot loads:

http://www.dixieslugs.com/index.html


_____________________________________________________


A 9mm may expand to a larger diameter, but a 45 ain't going to shrink

Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.
- Winston Churchill
 
Posts: 5077 | Location: USA | Registered: 11 March 2005Reply With Quote
one of us
posted Hide Post
quote:
Hey, for $120 I could shoot 10 pheasants! Just offering possibilities


Dan, 120 bucks won't buy the gas to make to PHeasant country from where Jeffe is.

Rules me out to, I don't have a Pheasant rifle Smiler

Been thinking about a pheasant hunt in the Texas panhandle, sounds like fun.


Billy,

High in the shoulder

(we band of bubbas)
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
one of us
posted Hide Post
Hey Jeffe,

Could you really justify burning a Barnes bullet in a 45/70 Smiler

You are cheap by the way. Smiler


Billy,

High in the shoulder

(we band of bubbas)
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
One of Us
posted Hide Post
Yeah, but if he does the "Got Milk?" commercial. He'll afford a few more bullets! jumping
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
Picture of jimatcat
posted Hide Post
i wanna be the first on my block to ream the 45-70 spartan.....so count me in!!!!!!!!!!!!!!!


go big or go home ........

DSC-- Life Member
NRA--Life member
DRSS--9.3x74 r Chapuis
 
Posts: 2845 | Location: dividing my time between san angelo and victoria texas.......... USA | Registered: 26 July 2006Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by .366torque:
if he does the "Got Milk?" commercial.


CRYBABY why me? rotflmo

Billy,
like i would know phesant from squab! they both tastes like chicken


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40084 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of yellowhammer
posted Hide Post
I like it thumb
 
Posts: 87 | Location: Eastern Texas | Registered: 13 June 2006Reply With Quote
One of Us
Picture of invader66
posted Hide Post
I don't have a Pheasant rifle either, Sold the #1 in 458 Lott so I'm stuck as well.I might be able to tell a pheasant from a bloody Roadrunner. Big Grin but ain' sure. But spending $120
to do someting weird seems to appeal to everyone in this bunch. jumping
Me included.


Semper Fi
WE BAND OF BUBBAS
STC Hunting Club
 
Posts: 1684 | Location: Walker Co,Texas | Registered: 27 August 2004Reply With Quote
one of us
Picture of packrattusnongratus
posted Hide Post
Invader66, I resemble that remark! Sounds like one of my schemes as well. Go Jeffe. Packy
 
Posts: 2140 | Registered: 28 May 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Oh,
perhaps we haven't properly amortorized the conversion reamer to 45/70 Nitro sofa

It will probably cut 30 chamber throats, before requiring a resharpening...

at $4 bucks a barrel ($8 bucks a spartan), well, lads, that's going to be the CHEAPEST 200fps you can ever buy!!

yes, i'll be glad to loan it out, once the Texans and Bubbas have dulled it to the first resharpening

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40084 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
  Powered by Social Strata Page 1 2 3  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    introducing the 45/70 NITRO

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia