THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    What action is needed to build a .404 Jeffrey
Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
What action is needed to build a .404 Jeffrey Login/Join
 
One of Us
posted
Do you start with a .375 H&H or something else?
Thanks,
 
Posts: 10440 | Location: Texas... time to secede!! | Registered: 12 February 2004Reply With Quote
One of Us
posted Hide Post
If it can take a h&h you can make it a 404. You need a magnum length action. A p14 or m1917 would make a good start for a 404.
 
Posts: 86 | Registered: 29 December 2013Reply With Quote
One of Us
posted Hide Post
Or a Win Model 70 in one of the ultramags .


DRSS
 
Posts: 710 | Location: Gulf coast SW Fla. USA | Registered: 21 December 2006Reply With Quote
One of Us
Picture of 505ED
posted Hide Post
mine is a Montana 1999, and a M70 LH that started as a 7mm mag...


DRSS Member
 
Posts: 2289 | Location: Texas | Registered: 02 July 2005Reply With Quote
one of us
Picture of 458Win
posted Hide Post
And mine is on a standard M-98 Mauser and was built by Jeffery in 1906


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
 
Posts: 4211 | Location: Bristol Bay | Registered: 24 April 2004Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
oh, bullspit ... if it can take a full lenght HH case, or full length weatherby, it can take a 404 .. what would YOU like to build on?


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40103 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
quote:
Originally posted by 458Win:
And mine is on a standard M-98 Mauser and was built by Jeffery in 1906

Lucky you and good taste. Pics?
A vintage action would be good for a vintage cart.
An ultra mag action might be the easiest conversion.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27616 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
posted Hide Post
Mine is built by Jack Haugh on a 1935 Brazilian Mauser Banner standard military action, & stocked by Sterling Davenport. A beautiful classic rifle that feeds great. It does just hold three down though, but that could be changed with a Weibe or Blackburn deep box bottom metal.


____________________________

.470 & 9.3X74R Chapuis'
Tikka O/U 9.3X74R
Searcy Classics 450/.400 3" & .577
C&H .375 2 1/2"
Krieghoff .500 NE
Member Dallas Safari Club
 
Posts: 1587 | Location: Eleanor, West Virginia (USA) | Registered: 20 April 2002Reply With Quote
One of Us
Picture of cal30 1906
posted Hide Post
Mine is built on a Winchester model 70 wrapped ina feather weight stock and has a Lothar barrel..
Its a beauty.


Cal30




If it cant be Grown it has to be Mined! Devoted member of Newmont mining company Underground Mine rescue team. Carlin East,Deep Star ,Leeville,Deep Post ,Chukar and now Exodus Where next? Pete Bajo to train newbies on long hole stoping and proper blasting techniques.
Back to Exodus mine again learning teaching and operating autonomous loaders in the underground. Bringing everyday life to most individuals 8' at a time!
 
Posts: 3084 | Location: Northern Nevada & Northern Idaho | Registered: 09 April 2005Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
Mine were built on Montana 1999 long actions.


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by jeffeosso:
oh, bullspit ... if it can take a full lenght HH case, or full length weatherby, it can take a 404 .. what would YOU like to build on?


I like the Model 70 followed by the BRNO.
 
Posts: 10440 | Location: Texas... time to secede!! | Registered: 12 February 2004Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
M70 will work.. Or Montana long... We've got friends here with several examples working.. And, of course, every rum could be converted...

Good luck


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40103 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post


Mine is built on a ZKK 602. You can get 5 down the magazine with a little bit work.

M
 
Posts: 413 | Location: Norway | Registered: 14 May 2009Reply With Quote
One of Us
Picture of PSmith
posted Hide Post
I have one on consignment at Champlin.

Built on a standard Mauser action by Westley Richards in 1926.


Paul Smith
SCI Life Member
NRA Life Member
DSC Member
Life Member of the "I Can't Wait to Get Back to Africa" Club
DRSS
I had the privilege to fire E. Hemingway's WR .577NE, E. Keith's WR .470NE, & F. Jamieson's WJJ .500 Jeffery
I strongly recommend avoidance of "The Zambezi Safari & Travel Co., Ltd." and "Pisces Sportfishing-Cabo San Lucas"

"A failed policy of national defense is its own punishment" Otto von Bismarck
 
Posts: 2545 | Location: The 'Ham | Registered: 25 May 2007Reply With Quote
One of Us
posted Hide Post
The question should be whether you want a controlled feed or a push feed and how many coins do you have in your pocket.

Lots of actions available for both.

What are you hunting?

Why the 404 Jeff specifically? I think it's an excellent cartridge but in this day and age there are many excellent cartridges out there much easier to obtain cases for, with the same or better ballistics...

Not to mention the dearth of bullet selections.(arguably)

It has it's nostalgia benefits certainly...not many can say they have a 404 Jeffery in their rack...which is reason enough to have one.
 
Posts: 1211 | Registered: 25 January 2014Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by PSmith:
I have one on consignment at Champlin.

Built on a standard Mauser action by Westley Richards in 1926.


Great looking rifle.
New barrel and looks super.
How is a scope mounted on it? The "top" looks different than what I am used to looking at.
 
Posts: 10440 | Location: Texas... time to secede!! | Registered: 12 February 2004Reply With Quote
One of Us
posted Hide Post
Mine is built on a pre 64 Model 70 action.

Feeds great.


Hook em Horns
 
Posts: 335 | Location: Austin, Texas | Registered: 11 February 2012Reply With Quote
One of Us
Picture of Von Gruff
posted Hide Post
1950's FN Columbian ex military 98


Von Gruff.

http://www.vongruffknives.com/

Gen 12: 1-3

Exodus 20:1-17

Acts 4:10-12


 
Posts: 2693 | Location: South Otago New Zealand. | Registered: 08 February 2009Reply With Quote
one of us
Picture of bwanamrm
posted Hide Post
quote:
Mine is built by Jack Haugh on a 1935 Brazilian Mauser Banner standard military action, & stocked by Sterling Davenport.


An involuntary shiver just ran up my spine... would love to see that one!

And mine was built on a Classic M70 RUM by HCR.


On the plains of hesitation lie the bleached bones of ten thousand, who on the dawn of victory lay down their weary heads resting, and there resting, died.

If you can talk with crowds and keep your virtue,
Or walk with Kings - nor lose the common touch...
Yours is the Earth and everything that's in it,
And - which is more - you'll be a Man, my son!
- Rudyard Kipling

Life grows grim without senseless indulgence.
 
Posts: 7568 | Location: Victoria, Texas | Registered: 30 March 2003Reply With Quote
One of Us
posted Hide Post
Mine is a LH CZ 550 Mag action. Work fine. There probably more practical cartridges in the modern times. However, the .404 has stood the test of time and still does the job.
 
Posts: 1700 | Location: USA | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
Looking at having one built off a LH Rem 700 action if I don't get my 416rm tamed down a little.


LORD, let my bullets go where my crosshairs show.
Not all who wander are lost.
NEVER TRUST A FART!!!
Cecil Leonard
 
Posts: 2786 | Location: Northeast Louisianna | Registered: 06 October 2009Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
quote:
Originally posted by bwana cecil:
Looking at having one built off a LH Rem 700 action if I don't get my 416rm tamed down a little.


Make no mistake. You can load the 404 Jeffery up to where it can kill on both ends of the rifle! In my custom made MRC Long Action rifle at 10.5 pounds it's fun. In my lighter M 03 Mauser, it gets your attention rather quickly!


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
one of us
Picture of fla3006
posted Hide Post
One of the great things about the 404 is that it does not require a magnum length action. A standard length pre-war 98 Mauser is the only action I would consider.


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
One of Us
Picture of PSmith
posted Hide Post
quote:
Originally posted by dogcat:
quote:
Originally posted by PSmith:
I have one on consignment at Champlin.

Built on a standard Mauser action by Westley Richards in 1926.


Great looking rifle.
New barrel and looks super.
How is a scope mounted on it? The "top" looks different than what I am used to looking at.


dogcat, no scope on it, was never drilled. That's bascially the reason I'm selling it; iron sights are not for me at my advanced age and I'm not gonna be the guy to drill holes in a WR/Mauser. And I need the money for Mr. Syncerus Caffer next year!


Paul Smith
SCI Life Member
NRA Life Member
DSC Member
Life Member of the "I Can't Wait to Get Back to Africa" Club
DRSS
I had the privilege to fire E. Hemingway's WR .577NE, E. Keith's WR .470NE, & F. Jamieson's WJJ .500 Jeffery
I strongly recommend avoidance of "The Zambezi Safari & Travel Co., Ltd." and "Pisces Sportfishing-Cabo San Lucas"

"A failed policy of national defense is its own punishment" Otto von Bismarck
 
Posts: 2545 | Location: The 'Ham | Registered: 25 May 2007Reply With Quote
One of Us
posted Hide Post
quote:
Syncerus Caffer

Cape Buffalo...translating from Mr Westley Richards smart-ass :-)
 
Posts: 20175 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
new member
posted Hide Post
A traditional cartridge has to be built on a traditional action.
 
Posts: 17 | Registered: 12 February 2014Reply With Quote
One of Us
Picture of MJines
posted Hide Post
Mine was done a Oberndorf (Chilean) standard length Mauser 98 action. Feeds and functions flawlessly.

http://forums.accuratereloadin...521/m/1191030271/p/3


Mike
 
Posts: 21878 | Registered: 03 January 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Swaggart:
A traditional cartridge has to be built on a traditional action.


and nothing is more traditional than M-70

Wink


"The rule is perfect: in all matters of opinion our adversaries are insane." Mark Twain
TANSTAAFL

www.savannagems.com A unique way to own a piece of Africa.

DSC Life
NRA Life
 
Posts: 3386 | Location: Central Texas | Registered: 05 September 2013Reply With Quote
One of Us
Picture of MJines
posted Hide Post
quote:
Originally posted by Sean Russell:
quote:
Originally posted by Swaggart:
A traditional cartridge has to be built on a traditional action.


and nothing is more traditional than M-70

Wink


. . . unless it is a 98 action.


Mike
 
Posts: 21878 | Registered: 03 January 2006Reply With Quote
One of Us
posted Hide Post
The M98 Mauser wasn't too bad as a prototype--


stir

sofa


"The rule is perfect: in all matters of opinion our adversaries are insane." Mark Twain
TANSTAAFL

www.savannagems.com A unique way to own a piece of Africa.

DSC Life
NRA Life
 
Posts: 3386 | Location: Central Texas | Registered: 05 September 2013Reply With Quote
One of Us
posted Hide Post
All sorts of good suggestions here.

I will just say that mine is built on a VZ24 and works flawlessly.

IMHO, any CRF with a 3.6" box will work fine.
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
one of us
Picture of 458Win
posted Hide Post



Here ia a photo my my 1907 vintage 404 Jeffery built on a standard length commercial M-98



Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
 
Posts: 4211 | Location: Bristol Bay | Registered: 24 April 2004Reply With Quote
One of Us
posted Hide Post
Hi Phil.
A pity I didnt get a chance to hold and handle that rifle last fall… Maybe one day I will get the chance again…

Ulrik
 
Posts: 873 | Location: Denmark | Registered: 04 January 2005Reply With Quote
one of us
Picture of 458Win
posted Hide Post
I certainly hope so as well


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
 
Posts: 4211 | Location: Bristol Bay | Registered: 24 April 2004Reply With Quote
One of Us
Picture of eagle27
posted Hide Post
That's a nice example of an opened up M98 phil. As a matter of interest how much metal has been removed from the front ramp/lower locking lug recess to fit the 404?

Like to compare with my own M98 in 404.
 
Posts: 3928 | Location: Rolleston, Christchurch, New Zealand | Registered: 03 August 2009Reply With Quote
one of us
Picture of Sevens
posted Hide Post
I hear the M70 in a RUM chambering makes for a very easy conversion based upon the similar size of the RUM and the Jeffery casing.


____________________________

If you died tomorrow, what would you have done today ...

2018 Zimbabwe - Tuskless w/ Nengasha Safaris
2011 Mozambique - Buffalo w/ Mashambanzou Safaris
 
Posts: 2789 | Location: Dallas, TX | Registered: 27 January 2004Reply With Quote
one of us
Picture of Palmer
posted Hide Post
Phil that is a fantastic rifle - but no recoil pad?


ALLEN W. JOHNSON - DRSS

Into my heart on air that kills
From yon far country blows:
What are those blue remembered hills,
What spires, what farms are those?
That is the land of lost content,
I see it shining plain,
The happy highways where I went
And cannot come again.

A. E. Housman
 
Posts: 2251 | Location: Mo, USA | Registered: 21 April 2002Reply With Quote
One of Us
posted Hide Post
I used a BRNO ZG47 for a 404.


Ken

DRSS, PP Chapter
Life NRA
Life SCI
Life DSC
 
Posts: 1336 | Location: PA | Registered: 06 August 2002Reply With Quote
one of us
Picture of 458Win
posted Hide Post
quote:
Originally posted by Palmer:
Phil that is a fantastic rifle - but no recoil pad?


Allen, This rifle of mine was one of the very first 404's that Jeffery built and they built on a standard commercial 1905 action. The 404 was the first large bore designed for bolt rifles and Jeffery was experimenting and piecing out work to many smaller shops in the area.
It was obviously designed as a working rifle and proofed for the same 400 gr bullet and 60 gr cordite as the 450/400. Even with the steel butt the recoil is not bad and no worse than a 375 of the same weight ( 8 1/2 lb)


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
 
Posts: 4211 | Location: Bristol Bay | Registered: 24 April 2004Reply With Quote
One of Us
posted Hide Post
I have a vz24 action and a lothar Walther barrel for my .404 project.
 
Posts: 477 | Location: western arkansas | Registered: 11 July 2010Reply With Quote
  Powered by Social Strata Page 1 2  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    What action is needed to build a .404 Jeffrey

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia