THE ACCURATERELOADING.COM CUSTOM RIFLE FORUM

Page 1 2 3 
Go
New
Find
Notify
Tools
Reply
  
7x57 Wiebe Progress Photos
 Login/Join
 
jawheeler
One of Us
posted
I can't find the original post to add to it. Anyway here's the new pics.












 
Posts: 603 | Location: Louisiana USA | Registered: 24 August 2007Reply With Quote
Craftsman
one of us
posted Hide Post
popcorn More.........we want more!


Craftsman
 
Posts: 1551 | Location: North Texas | Registered: 11 February 2001Reply With Quote
shootaway
one of us
posted Hide Post
nice looking rifle-really nice
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
CAS II
One of Us
posted Hide Post
Hot damn! I'm normally not a fan of a schnabel fore end, but that one could make me change my mind.

Dang that is nice!
 
Posts: 876 | Registered: 09 June 2005Reply With Quote
TC1
one of us
Picture of TC1
posted Hide Post
quote:
Originally posted by CAS II:
Hot damn! I'm normally not a fan of a schnabel fore end, but that one could make me change my mind.

Dang that is nice!


No kidding! When looking at the top pictures I thought to myself, "there isn't enough wood to make that tip look right." Then I scrolled down and saw it shaped. Wow, that is something else.

jawheeler, that is going to be a real show stopper. Thanks for sharing.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
Rick R
One of Us
Picture of Rick R
posted Hide Post
What a neat little rifle! Please update this thread frequently.
 
Posts: 1912 | Location: Charleston, WV, USA | Registered: 10 January 2003Reply With Quote
dwheels
One of Us
posted Hide Post
The overall stock geometry that Duane uses is very attractive. I like the slim wrist, the angle of the pistol grip and the size and shape of the cheek rest. I have never seen a forend tip done like that but I like it too. Nice piece of wood. I have one similar that I hope turns out as well. Your a lucky man Jawheeler. DW
 
Posts: 1016 | Location: Happy Valley, Utah | Registered: 13 October 2006Reply With Quote
lal
One of Us
posted Hide Post
I'd love to rub that stock with a good oil! Not 3in1!
 
Posts: 885 | Location: Eastern Cape, South Africa | Registered: 08 January 2010Reply With Quote
montea6b
One of Us
posted Hide Post
That tip is just about the coolest thing I have seen on a rifle. And the rest is beautiful as well...
 
Posts: 1138 | Location: Washington State | Registered: 07 September 2005Reply With Quote
Kabluewy
One of Us
Picture of Kabluewy
posted Hide Post
I'm having my first really custom stock made, and I'm going to be sure that my gunsmith sees the pictures of that forend, and tip. That's so much nicer looking than the standard squared off joint of ebony and walnut.

KB


~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~

~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
 
Posts: 12818 | Registered: 16 February 2006Reply With Quote
Nomo4me
One of Us
posted Hide Post
Gawd.
I think I have a brand new favorite ever-ever Weibe rifle. dancing
 
Posts: 718 | Location: Utah | Registered: 14 September 2008Reply With Quote
jawheeler
One of Us
posted Hide Post
Thanks guys. The schnable was a tough call. Duane makes the best I've seen so I went with it. No regrets there.
 
Posts: 603 | Location: Louisiana USA | Registered: 24 August 2007Reply With Quote
Howard
one of us
posted Hide Post
Fantastic rifle. I would like to see some more close ups of that fore end if possible.


Howard
Moses Lake, Washington USA
hwhomes@outlook.com
 
Posts: 2341 | Location: Moses Lake WA | Registered: 17 October 2000Reply With Quote
weaveman
One of Us
posted Hide Post
quote:
Originally posted by 22WRF:
How can a world class gunmaker work on such a messy bench? Confused


It's because he's a WORKING gunsmith.


James
 
Posts: 130 | Location: Floresville,TX. | Registered: 12 June 2008Reply With Quote
Kabluewy
One of Us
Picture of Kabluewy
posted Hide Post
In one of those pictures I count 8 bottom metal units. I'll bet that's what it is with 22WRF. He's drooling over those nice one-piece bottom metal units. Wink

KB


~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~

~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
 
Posts: 12818 | Registered: 16 February 2006Reply With Quote
jens poulsen
One of Us
posted Hide Post
Porndrugs... Cool


DRSS: HQ Scandinavia. Chapters in Sweden & Norway
 
Posts: 2805 | Location: Denmark | Registered: 09 June 2005Reply With Quote
Howard
one of us
posted Hide Post
quote:
Originally posted by CAS II:
Hot damn! I'm normally not a fan of a schnabel fore end, but that one could make me change my mind.

Dang that is nice!


Opinions on how this would look without a schnabel fore end?

Chic was telling me about a rifle Ray Price did years ago with this feature. Wasn't smart enough to envision it. Now Tyler and I want this style fore end on our Dakotas.


Howard
Moses Lake, Washington USA
hwhomes@outlook.com
 
Posts: 2341 | Location: Moses Lake WA | Registered: 17 October 2000Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
Duane,
you are truely Gifted!


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40215 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Howard
one of us
posted Hide Post
quote:
Originally posted by 22WRF:
How can a world class gunmaker work on such a messy bench? Confused


Who cares, just look at the product he puts out.


Howard
Moses Lake, Washington USA
hwhomes@outlook.com
 
Posts: 2341 | Location: Moses Lake WA | Registered: 17 October 2000Reply With Quote
BaxterB
One of Us
Picture of BaxterB
posted Hide Post
hubba hubba hubba....
 
Posts: 7832 | Registered: 31 January 2005Reply With Quote
Iron Buck
one of us
Picture of Iron Buck
posted Hide Post
That is one SWEET mauser Smiler. I LOVE the forend .....gives me ideas for my next custom beer You will have to post pictures when that one is finished

What barrel , length and contour did you use? Please tell us what else you speced. GREAT rifle
 
Posts: 813 | Location: Wexford PA, USA | Registered: 18 July 2002Reply With Quote
JBrown
one of us
Picture of JBrown
posted Hide Post
quote:
Originally posted by SDH:
I would never, ever, under any circumstance, no matter what---
Let a client talk me into doing a forend tip like that one!

That said, I think it looks pretty cool and was very well done!



SDH

I am interested in hearing your reasoning as to why you would not do one.

I agree that the finished product looks great. But, man oh man, that wedge of ebony looks like it is going to do everything it can to split the forend.


Jason

"You're not hard-core, unless you live hard-core."
_______________________

Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt.

Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry
Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure.

-Jason Brown
 
Posts: 6842 | Location: Nome, Alaska(formerly SW Wyoming) | Registered: 22 December 2003Reply With Quote
Kabluewy
One of Us
Picture of Kabluewy
posted Hide Post
quote:
Originally posted by JBrown:

that wedge of ebony looks like it is going to do everything it can to split the forend.


Or hold it together, whichever way you want to look at it. Wink

Kidding aside, I read that ebony is an oily wood compared to walnut, and that's why the use of dowels is customary in the normal 90 degree or 45 degree joint. I'm wondering how that all applies to this kind of joint - or is it simply a non-issue?

KB


~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~

~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
 
Posts: 12818 | Registered: 16 February 2006Reply With Quote
22WRF
One of Us
posted Hide Post
I would think that if you were the owner of this fine rifle, and were worried about it, you could ask the maker to put something akin to a cross bolt up there.

If it were mine, and If I was worried about it, (which I wouldn't be) I would mill a very narrow double t slot underneath the barrel up there and glass in a small metal double ended bolt of some sort. Out of sight and out of mind.

Nevertheless, I am sure that Mr. Wiebe has already thought all of this through and did what he had to do, or didn't do what he didn't have to do, in order to be confident that the thing wasn't going to have problems.
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
CAS II
One of Us
posted Hide Post
If it were my rifle, I'd just tell Duane to do what he does best then shut up and watch.
 
Posts: 876 | Registered: 09 June 2005Reply With Quote
Von Gruff
One of Us
Picture of Von Gruff
posted Hide Post
quote:
Originally posted by jawheeler:
I can't find the original post to add to it. Anyway here's the new pics.




I am not generally a fan of schnabels either but this is THE best interpretation I have ever seen. Simply superb.
Those stock lines are beautiful.

Von Gruff.


Von Gruff.

http://www.vongruffknives.com/

Gen 12: 1-3

Exodus 20:1-17

Acts 4:10-12


 
Posts: 2694 | Location: South Otago New Zealand. | Registered: 08 February 2009Reply With Quote
srtrax
One of Us
Picture of srtrax
posted Hide Post
quote:
How can a world class gunmaker work on such a messy bench?


You should see mine...and I'm NOT world class. Big Grin

Nice rifle all the way!!!
ENJOY


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
jawheeler
One of Us
posted Hide Post
Starting the finish of the wood. Duane has got me biting my nails over that finish. Hell I've been biting my nails during the whole project but it keeps coming out great.


 
Posts: 603 | Location: Louisiana USA | Registered: 24 August 2007Reply With Quote
dogcat
One of Us
posted Hide Post
I am breaking one of the commandments by coveting. Nice rifle.
 
Posts: 10497 | Location: Texas... time to secede!! | Registered: 12 February 2004Reply With Quote
boom stick
One of Us
Picture of boom stick
posted Hide Post
Drool...
Too bad you did not pick a classy cart for that beauty Wink

I LOVE the fore end!!!
Gorgeous wood!
Bravo for the choice of a steel but plate tu2


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27617 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
Customstox
One of Us
posted Hide Post
Jawheeler and Duane, very nice stock. Typical Duane perfection. I remember the one that Ray Price did had a 90 degree interior angle so the curve was a bit more abrupt but equally nice looking. I did not see it under construction but after it was shaped but he told me how to do it and now it looks like I have to do it again ........... and then again, no thanks to you guys. Frowner

As far as the integrity of that glue bond, I can't think of how it could go anywhere using a good glue like epoxy. If Duane does not think it needs any dowels I am not going to second guess his judgement.


Chic Worthing
"Life is Too Short To Hunt With An Ugly Gun"
http://webpages.charter.net/cworthing/
 
Posts: 4917 | Location: Wenatchee, WA, USA | Registered: 17 December 2001Reply With Quote
Trax
One of Us
posted Hide Post
*
 
Posts: 9434 | Location: Here & There- | Registered: 14 May 2008Reply With Quote
loud-n-boomer
one of us
Picture of loud-n-boomer
posted Hide Post
Minor hijack.

Hi JA.

Here is what it will look like finished.



One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx
 
Posts: 3866 | Location: Eastern Slope, Colorado, USA | Registered: 01 March 2001Reply With Quote
gunmaker
One of Us
Picture of gunmaker
posted Hide Post
JA
Nice project. Cool

Great stuff as usual Duane. That V must sure let you know if you've got both sides shaped the same.

One question.
What's with the roll pins on the Wilton?


gunmaker
------------------
James Anderson Metalsmith & Stockmaker
WEB SITE

More Pics on FLICKR
 
Posts: 1864 | Location: Western South Dakota | Registered: 05 January 2005Reply With Quote
DMB
One of Us
posted Hide Post
Duane,

No words available in English that can describe the magnificent work you do.
That is just georgous.

Don




 
Posts: 5798 | Registered: 10 July 2004Reply With Quote
Duane Wiebe
One of Us
posted Hide Post
Messy work bench: The guys with a clean bench just haven't had a chance to spread out their tools yet.

Roll Pins: I've made up a cork lined jaws with magnets on the back...the roll pins just give a little extra indexing and "hold em"

Dowel: There is a mechanical reinforecment such as 22 WRF mentioned...always pays to have a belt AND suspenders..
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
Dall85
One of Us
posted Hide Post
quote:
always pays to have a belt AND suspenders..

Contingency planning is GREAT!

Beautiful work, Duane!!!


Jim
 
Posts: 1210 | Location: Memphis, TN | Registered: 25 January 2008Reply With Quote
Scrollcutter
one of us
Picture of Scrollcutter
posted Hide Post
Fantastic as always.

I am amazed at the skill some people are gifted with.


Roger Kehr
Kehr Engraving Company
(360)456-0831
 
Posts: 1634 | Location: Washington State | Registered: 29 December 2002Reply With Quote
BaxterB
One of Us
Picture of BaxterB
posted Hide Post
That's it, I've got a left arm i'm selling so I can get a rifle like this, bids start at a grand...
 
Posts: 7832 | Registered: 31 January 2005Reply With Quote
Duane Wiebe
One of Us
posted Hide Post
quote:
Originally posted by Scrollcutter:
Fantastic as always.

I am amazed at the skill some people are gifted with.


What....you wanna borrow money of something?...look who's talking..
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
  Powered by Social Strata Page 1 2 3  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia