THE ACCURATERELOADING.COM CUSTOM RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Custom Built Rifles    My 7mm-08 Project (updated 3/17/13)
Page 1 2 3 4 5 6 
Go
New
Find
Notify
Tools
Reply
  
My 7mm-08 Project (updated 3/17/13)
 Login/Join
 
one of us
posted Hide Post
Beautifully done. Thanks again for your time and effort posting the progress.


Use enough gun...
Shoot 'till it's dead, especially if it bites.
 
Posts: 898 | Location: Southlake, Tx | Registered: 30 June 2003Reply With Quote
One of Us
posted Hide Post
Progress is a little slow this weekend. I had to go in to work yesterday and I am behind on my honey do list. So I was only able to spend a short amount of time on my project today. I was able to glue in the studs for the swivels. There is some rust on the swivels from all my handling and some release agent so they look a little grungy.

The next step will be to sand them down to the contour of the stock and then number the swivels and screws so I can get them back in the same place.


 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
one of us
posted Hide Post
Brad,

You have a very good write up and pictures to show. I am late getting to this topic, but glad to see people sharring their experiences.

Now study checkering and learn that process. You probably have the ability to checker the stock with a little help.

Les Brooks, retired gunsmith
 
Posts: 965 | Location: Texas | Registered: 19 May 2004Reply With Quote
One of Us
posted Hide Post
Les,

Thanks for the kind words, your thread on stockmaking was one of the inspirations for this thread.

As far as checkering goes, I am not sure I am ready to take that leap. I have tried it a few times and have failed miserably! Some day I will do it, but I think that I will have to take some instruction from someone the get there.
 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Brad,

You simply need the write tools. For me the right tool for just about every job is a check book.


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
Today I finished up the sling swivels and timed my bottom metal screws.

Here is the sling swivel before I started fileing it to match the contour of the butt.

Here it is during fileing

Sanding down flush and smooth

Cleaned off.


Here I am cutting the front action screw so the screw slot so it is timed “north and south”


Here it is installed, yes there is a gap between the bottom metal and the stock in front of the front reciever screw. That is one of the downsides to a semi-inleted stock, I cant make wood magically re appear where it is not.

 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
posted Hide Post
Brad,

Good job. Much of the action inletting can be done with a Dremel. I use a cordless unit and only a couple of bits for all inletting work. One looks like and end mill, the other like a side mill, and the third is a little carbide ball.


Quick, Cheap, or Good: Pick Two
 
Posts: 2141 | Location: Tennessee | Registered: 18 February 2007Reply With Quote
One of Us
posted Hide Post
Today I worked on a few odds and ends. I trimmed the action screws to length, inletted the bolt and assembled everything to check the scope alignment and function of everything before I started finishing the stock.

I like to use nuts to mark where I want to trim, then when you remove them the threads are nice and clean. Here is me cutting the screw to length


Inletting the bolt.


Everything assembled checking fit.



The stock has been sanded down to 400 grit then a coat of polyurethane has been applied to seal the wood.


I am now going to wet sand with 600 grit paper and minwax wipe on poly as a lubricant. When the poly starts to dry I will wipe it with paper towels across the grain to start filling the pores. Here is a picture of my sanding blocks and the stock before I started finishing. I was not able to take pictures during the finishing process as it gets a little messy.


Here is the stock after the first sand in coat of finish.
 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Really looking nice...


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
This is the fun part,when we see the finish go on. Wink
 
Posts: 189 | Registered: 17 February 2005Reply With Quote
One of Us
posted Hide Post
Here is the second coat of the finish after I cut back the first coat with 600 grit paper. The pores are starting to get filled in here. I will cut this back with 600 paper before I apply a third coat.

 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
one of us
posted Hide Post
popcorn


Craftsman
 
Posts: 1531 | Location: North Texas | Registered: 11 February 2001Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Looking better every day...

Are u going to start with Barnes 150 gr TSXs or TTSXs

or Hornady 139 grn GMX


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
Mike,

I was thinking about the barnes 120 gr TSX. But I havn't decided yet. I was going to go to midway and start reading bullet reviews and see what people are saying. I don't have any other 7mm's so I am not really up to speed with what people like.
 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
posted Hide Post
I've had excellent results with Hornady 139 Interlocks. But then, you can't use them in Condor country.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
posted Hide Post
The 120 TSX is a great killer. Is that Jerry Fisher's drawing you have hanging in the shop?
 
Posts: 179 | Location: South of Anchorage | Registered: 21 January 2012Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by labdad:
The 120 TSX is a great killer. Is that Jerry Fisher's drawing you have hanging in the shop?

Yep that is my inspiration. My garage is my “man zone” and is decorated accordingly. Big Grin
 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
posted Hide Post
A guy could do worse than Jerry's work as inspiration. Good job.
 
Posts: 179 | Location: South of Anchorage | Registered: 21 January 2012Reply With Quote
One of Us
posted Hide Post
The rifle looks really nice. tu2


The price of knowledge is great but the price of ignorance is even greater.
 
Posts: 777 | Location: Socialist Republic of California | Registered: 27 February 2005Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Ok it is Sunday afternoon...where is the update...


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
BTT...we are all feeling deprived....


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
Progress has been slow lately, it is really hard to take pictures of a gunstock while finishing and really show the finish. I have the grain about 95% filled in now I am ready to cut it back with FFFF then I will apply a thin coat of Linspeed to give it that hand rubbed look. Here are a few pics.




I have started working the metal work prepping for finishing. Here is a pic when I started.

Here I am sanding it with a home made block. I started at 320 then 400 and I will end up at 600. This is work in process and I will post pics when I am done.





I need to find someone that can engrave my name and cartridge on the barrel. I usually do it with stamps but I want this one to be a little nicer.
 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
posted Hide Post
Spent a little time this afternoon rubbing out my stock finish with FFFF compound on felt pads. Here is the result.

 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Sweet...now we got to kick it over the goal line...let's get it engraved, blued, and checkered


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
So what is left...


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
Not sure if its said before, but I would most definatly change the scope rings & base!

A pair of Talley one-piece rings, in ex-low for 1" tubes!

Other then that.. very nice!
 
Posts: 615 | Location: a cold place | Registered: 22 June 2005Reply With Quote
One of Us
posted Hide Post
I am in the final stretch now. But the going is slow, polishing takes a long time and I know from experience if I rush it I will round corners. Soon the metal will go off the be hot blued, the wood off to get checkered then it will come home to be shot.

Now I have to rethink my scope ring choice! I like the talley's but the ones that I have seen on the Remington 700 hang over into the bolt/receiver opening. To me that just does not look right. We will see

Here are some pics from the polishing process.





 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
posted Hide Post
So, who are you going to have dip the metal for you?
 
Posts: 189 | Registered: 17 February 2005Reply With Quote
One of Us
posted Hide Post
I have always lusted over the Miller/Crum mounts.
 
Posts: 179 | Location: South of Anchorage | Registered: 21 January 2012Reply With Quote
One of Us
posted Hide Post
Brad, that is looking pretty sweet.I have a Rem Classic in 7-08, it is a keeper. I have built a couple of stocks for my schuetzen rifles, both from curly maple. Neither one is really finished, and then this year I picked up some decent walnut for them. One of the maple ones is a keeper, so some of that walnut may go on a Stevens I have. I will probably be back at it over Xmas and beyond. What you are doing here with the buttplate and swivels and the brass screw inserts is a great idea. I think I am actually getting inspired from this thread.


Krieghoff Classic 30R Blaser
Stevens 044-1/2 218 Bee
Ruger #1A 7-08
Rem 700 7-08
Tikka t3x lite 6.5 creedmo
Tikka TAC A1 6.5 creedmo
Win 1885 300H&H. 223Rem
Merkel K1 7 Rem mag
CCFR
 
Posts: 284 | Location: southern AB | Registered: 17 May 2011Reply With Quote
One of Us
posted Hide Post
Hey guys, no update today. I spent the weekend camping with my son and his Cub Scout Pack

Kaboom, I am probably going to send the metal off to hot flash to get it blued.

Labdad, I will have to go check them out. I have not decided what I am going to do with the mounts and rings yet.

209, I am glad that this thread is inspiring you, that is why I did it. My way of giving back the the forum for all the inspiration and information that I have gotten off this forum. Please post your project when you get going!
 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
posted Hide Post
 
Posts: 179 | Location: South of Anchorage | Registered: 21 January 2012Reply With Quote
One of Us
Picture of friarmeier
posted Hide Post
labdad, to each their own...those rings/bases aren't my cup of tea, though they do get the scope down low, which I like.

Now, a nice pair of S & K look really nice, in my opinion!

friar


Our liberties we prize, and our rights we will maintain.
 
Posts: 1222 | Location: A place once called heaven | Registered: 11 January 2005Reply With Quote
One of Us
posted Hide Post
Now that my parts are polished I decided to cut my barrel to length and crown it. I started by cutting the excess off with a hack saw.



Then chucked it up in the lathe to cut the crown.



After that I lapped the crown with a brass lap to remove any burrs.



Here is the final result.

 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
What bbl length?


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
What bbl length?


23 1/2 inches
 
Posts: 694 | Location: Santa Ynez Valley, Ca | Registered: 14 March 2011Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Luv it...a custom length


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
you sure are doing a nice job.
I am no craftsman what soever, (But i do play a decent guitar) But I thought that maybe you could get rid of the little gap in the bottom by adding a little bit of steel and filing it back down?
...tj3006
 
Posts: 605 | Location: OR | Registered: 28 March 2012Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
where is the next update


Mike



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10058 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
one of us
posted Hide Post
All I can say is WOW! clap

Beautiful and a great caliber!
 
Posts: 10478 | Location: N.W. Wyoming | Registered: 22 February 2003Reply With Quote
  Powered by Social Strata Page 1 2 3 4 5 6  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Custom Built Rifles    My 7mm-08 Project (updated 3/17/13)

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia