Go | New | Find | Notify | Tools | Reply |
One of Us |
I got the prototype Winchester Model 70 in the 9.3x57 mag up and running.. It is my wildcat 8x57 mag, which is the 375 Ruger shortened to 57mm, necked up to 9.3. I believe it will be my favorite of the family. I shot today, as the weather cooled of a bit. I built up loads using IMR 4895 since I have a Nosler book with both 9.3x62 and 9.3x64 load data. I shot a Woodleigh 286 PP bullet and the velocities are for a three shot average. IMR 4895 charge (in grains) velocity (fps) 50 2091 52 2173 54 2290 56 2371 58 2435 59 2475 60 2502 60.5 2530 61 2551 61.5 2582 I saw no signs of pressure and I am close to getting compressed loads. It seems to be the equivelent to the 9.3x64, which what I was hoping for. I would make a simple build from any standard mag with a simple rebarrel. I look forward to using Reloader 17 for new loads as that gave the best velocity for the 8x57 mag. | ||
|
One of Us |
Can you post a pic comparing this round to the other cartridges in the lineup from the first pic in your 8x57 mag thread please. | |||
|
One of Us |
Sure. Give me a little time to gets some pics. I just got back from an elk hunt and the 8mm worked great. | |||
|
One of Us |
375 Ruger basic 6.5mm, 7mm, .30, 8mm, 9.3mm, 9.5mm(.375) The 7mm and 8mm have been fire formed. The rest have just been necked up or down. | |||
|
One of Us |
Interesting. Case capacity? Any thoughts on a 35, 400 or 404? The 6.5 would be sweet! In a 3.34" action, a 338 version would shine. A short action in 400 would be a nice thumper. 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
One of Us |
Good stuff. Glad to hear your new 8mm was a success in the field. | |||
|
one of us |
All looks good from here. Hope to keep an eye on this as these cats develop. | |||
|
One of Us |
I had one on a 98 action a few years ago but jimatcat wanted it more than I did. He might still have it. Never mistake motion for action. | |||
|
Moderator |
I'd like to know your case capacity -- something about 80-85gr? can i save you a great deal of trouble .. go straight to h335/tac .. i went through all the powders in the 550 flanged and the AccRel carts .. just go to h335 .. a 338 with be interesting opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
What is the loaded length of the 7mm. | |||
|
One of Us |
jeffeosso The case holds 79.5 grains of water. I will try to get H335 and work on some loads. Thanks. Timan The OAL of the 7mm is 3.23". It fits in the prototype and I believe the mag box is one of yours. | |||
|
One of Us |
3.230, that's interesting? How is brass available for the 6.5 and 7mm. | |||
|
One of Us |
Timan-- Brass has to be fabricated from 375 or 416 Ruger brass. It takes three forming dies to get to 8mm then I run it through a FL 7x57 Mag die to get the 7mm. I am getting ready to send off some fireformed cases for the 6.5, to get them to fireform I neck sized 7mm brass through a 6.5 WSM die. | |||
|
One of Us |
Are there any plans in the works for production of the brass on a larger scale? Maybe group buy just to prime the pump so to speak. Quality cartridge......maybe. | |||
|
One of Us |
Group buys do work. About 12 years ago (approx.) we did a group buy on the Chapuis dbl. rifles in 9.3x74 we all got a great bargain. Never mistake motion for action. | |||
|
One of Us |
Soooooo basically a 376 Steyr case capacity? You could use Steyr loads for reference if you build a 9.5 version.
577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
One of Us |
Timan-- I could try to organize a buy for brass. Which or both would most be interested in? I know 6.5's are the hot thing now. I would think the 7 would be the best place to start since a simple neck down for 6.5 and neck up for the 8mm, which seems to work very well. Let me know anyone's thoughts and I will reach out to Quality and RCC. Boom stick--Very similar to the 376, but with a standardize case head. Easy route with a standard Model 70 Mag action, rebarrel and you are basically done. All along the project was not about something new in ballistics, but to have a great functioning cartridge designed for the Mauser 98. I felt Mauser designed the 98 action around the geometry of the 57mm case and a larger case at the same length and proportional taper would work well. And it has to this point. The final verdict will be when I get a Mauser 98 action completed. Thanks. | |||
|
One of Us |
http://kwk.us/cases.html I think the case capacity is great. Slightly larger than the 9,3x62 so that is a great benchmark. Just need a 400 version 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
One of Us |
Boom stick-- If I added a 400 version, which bullet diameter would be best, .410 or .411? | |||
|
One of Us |
How much different is this from say the .325 WSM necked up to 9.3? | |||
|
One of Us |
lindy2--not much but it is not designed for a short action. Bullets can be seated so they don't eat up powder space. Also, it has a similar taper to the original 8x57 which feeds very well. | |||
|
One of Us |
I like the idea of an intermediate magnum. At 79.5 water cap. The 7 should perform about like the 7wsm long throat I've been playing with the last few years. My rifle is based on a 24 Mexican. Large ring. I made the mag box cartridge specific, with dims taken from my 404 drawings and shortened to 3.250. So internally it's wide like a 404 but short, the box holds 3 down comfortably and feeds very well. I think 757 mag could outshine the 7wsm long throat, especially from the M-98 platform, as it's more of a natural progression and I think if Mauser where here today he would approve. My rifle has served as a test bed for some titanium actions I've been working on which are 24 large ring Mexican copies with changes for going long range. 1x1/16x16 x .750 thread tennons 4340 steel bolts with 1/16th f.pin diameter, fp travel shortened by .140, integral pic. Rails for mounting ease. Just another fauna plinker, but very cool one at that. | |||
|
One of Us |
What is the advantage of using the Model 24 Mexican Mauser for your development? I don't see a Mexican Model 24 in the Olsen Book. Is it the same as a VZ-24? I do see a Mexican Model 1902 large ring. Found it. "M.1924B - Designation of Gewehr 98 and M1912 Mexican Mauser rifles whose barrels were changed to M24's to meet the Army's standards as far as length and the common cartridge. The conversion was done in Užice. Original bayonets were also converted to fit the new barrels.[1]" The 1912s were made by the Austrian Arms company. | |||
|
One of Us |
Iirc Ruger settled on .4105" for their barrels to split the difference. I have seen solids at .409". If this were my project, I would shoot mostly 405 win bullets unless I was going for bears or bigger. That said I would be ok with a .410" or 411" barrel but would go with .411" due to good and cheap 405 win bullets. More important to me is twist though. What is interesting is you could fit this cart in a short action with short tip to canalure 405 bullets keeping within the short action max OAL. 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia