THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    AHR Upgrade on a 375 Ruger African- UPDATE with final product pictures
Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
AHR Upgrade on a 375 Ruger African- UPDATE with final product pictures Login/Join
 
One of Us
posted
Wayne and I hatched an idea to do an "upgrade" on a Ruger African in 375, like they do the upgrades for CZ rifles! It is well underway with a new stock, quarter rib etc... As soon as I get some pictures I will post them. This is really cool for the Ruger lovers out there!
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
Picture of JudgeG
posted Hide Post
Can't wait to see it!

I have a couple of Rugers. I have never been very happy with the size of the safety (MKII) in that it is very small and when you are in a hurry, it can be difficult to operate. I've actually torn my thumb nail on it a couple of times. (For a non-DG rifle, it is just fine, btw). The Winchester wing seems to be much more user friendly. JMHO.

Does AHR have a solution for that? I'd love to get mine converted to a bigger and easier "wing".


JudgeG ... just counting time 'til I am again finding balm in Gilead chilled out somewhere in the Selous.
 
Posts: 7765 | Location: GA | Registered: 27 February 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by JudgeG:
Can't wait to see it!

I have a couple of Rugers. I have never been very happy with the size of the safety (MKII) in that it is very small and when you are in a hurry, it can be difficult to operate. I've actually torn my thumb nail on it a couple of times. (For a non-DG rifle, it is just fine, btw). The Winchester wing seems to be much more user friendly. JMHO.

Does AHR have a solution for that? I'd love to get mine converted to a bigger and easier "wing".


+1 tu2

465H&H
 
Posts: 5686 | Location: Nampa, Idaho | Registered: 10 February 2005Reply With Quote
one of us
Picture of Bill C
posted Hide Post
Good to hear!

This thread might provide some further inspiration: http://forums.accuratereloadin...11043/m/6121036921?r
 
Posts: 3153 | Location: PA | Registered: 02 August 2002Reply With Quote
One of Us
Picture of 31/2Makesmelaugh
posted Hide Post
This is a brilliant idea...I think the Ruger African has a lot of potential. Will the work involve straightening the bolt as well?


"Archery enshrines the principles of human relationships. The Archer perfects his form within himself. If his form is perfect, yet when he releases he misses, there is no point in resenting those who have done better than him. The fault lies nowhere."(Confucious)
 
Posts: 115 | Location: Oklahoma | Registered: 05 January 2005Reply With Quote
One of Us
posted Hide Post
I think at this point the bolt will be left as a factory original.
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
posted Hide Post
Here are some pictures of the stock. Not checkered yet, but a whole lot nicer than what Ruger puts on them.
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
posted Hide Post
I agree that the African is a great place to start. Its 90% there. They upgraded this year to a barrel band swivel which gave it the look of a safari rifle. Now if they would just add a quarter rib.....

However thats what keeps the price point down below the RSM's. Id love to see that rifle in 9.3x62. My current project is putting an Alaskan into an HS Precision stock for a compact rifle. I cant live with the Hogue stock but like the compact size.

Im off to South Africa in July and will be taking my African back for its second trip.

Rob
 
Posts: 309 | Location: WV | Registered: 14 February 2005Reply With Quote
One of Us
posted Hide Post
Sorry the pics posted so small. I will post larger pictures once AHR is finished checkering
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
Picture of archer_375
posted Hide Post
Nice! I may very well be interested. Are we talking same price point as the CZ upgrade? PM me when this project is ready to roll...
 
Posts: 183 | Location: Where the deer and antelope play | Registered: 27 December 2006Reply With Quote
One of Us
posted Hide Post
Boy, just put a larger magazine in her and I'd be real happy.. I know it's just me but I feel better with at least a 4+1

My Sako Safari and 458 Lott are 5+1 I feel like I'm going in after-em with practically a assault rifle Wink


MopaneMike
 
Posts: 1112 | Location: Southern California USA | Registered: 21 December 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Rob Haught:
I agree that the African is a great place to start. Its 90% there. They upgraded this year to a barrel band swivel which gave it the look of a safari rifle. Now if they would just add a quarter rib.....

However thats what keeps the price point down below the RSM's. Id love to see that rifle in 9.3x62. My current project is putting an Alaskan into an HS Precision stock for a compact rifle. I cant live with the Hogue stock but like the compact size.

Im off to South Africa in July and will be taking my African back for its second trip.

Rob


Rob,

I put my Alaskan in a take-off African stock.. Very handy indeed..You might wanna give that a whirl..


MopaneMike
 
Posts: 1112 | Location: Southern California USA | Registered: 21 December 2006Reply With Quote
One of Us
posted Hide Post
WHOA!!!!

A thread about powerful Rugers, and no whining about the cast receiver? Goodness. Is it possible that enlightenment has taken a foothold here on AR?
 
Posts: 490 | Location: middle tennessee | Registered: 11 November 2009Reply With Quote
One of Us
Picture of archer_375
posted Hide Post
AR just cost me some $$$...I boxed up my Ruger Hawkeye African 375 Ruger today and sent it to AHR. Can't wait to get the "new" rifle back.
 
Posts: 183 | Location: Where the deer and antelope play | Registered: 27 December 2006Reply With Quote
One of Us
posted Hide Post
As soon as I get more pictures I will post them! I hope I can figure out how to make them larger this time!
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
posted Hide Post
Updates with pictures??


NorthGaAire
 
Posts: 270 | Location: North Georgia Mtns | Registered: 06 January 2005Reply With Quote
One of Us
posted Hide Post
Here is a picture of my metal work that goes to finishing tomorrow!!
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
Picture of CCMDoc
posted Hide Post
Looks great! Very impressive job on that quarter rib. tu2

Though the pictures are small,the stock looks beautiful. Is that Wayne in the hip-hugger jeans and green windbreaker? Looking mighty svelte there, Wayne. Wink


NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003

Don't Save the best for last, the smile for later or the "Thanks" for tomorow
 
Posts: 3465 | Location: In the Shadow of Griffin&Howe | Registered: 24 November 2007Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
very nice .. looks like the rib matches the bridges, yeah?


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40120 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by CCMDoc:
Looks great! Very impressive job on that quarter rib. tu2

Though the pictures are small,the stock looks beautiful. Is that Wayne in the hip-hugger jeans and green windbreaker? Looking mighty svelte there, Wayne. Wink


I am not sure if it is Wayne but I will try to post larger pictures so we can get to the bottom of this! Wink
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
posted Hide Post
Ha!

That's Wayne's lovely wife Cindy! I recognized the jacket.

Rich
DRSS
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
Picture of CCMDoc
posted Hide Post
quote:
Originally posted by Idaho Sharpshooter:
Ha!

That's Wayne's lovely wife Cindy! I recognized the jacket.

Rich
DRSS


I guess the flower pattern on the blouse was a dead givaway jumping

Wayne, his family and his company are the best tu2


NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003

Don't Save the best for last, the smile for later or the "Thanks" for tomorow
 
Posts: 3465 | Location: In the Shadow of Griffin&Howe | Registered: 24 November 2007Reply With Quote
One of Us
posted Hide Post
OK, my ears were burning. So, you found out what I wear under my shop apron. The secret's out I guess.
 
Posts: 1253 | Location: Montana | Registered: 18 February 2007Reply With Quote
One of Us
posted Hide Post


Here is a larger picture of the stock for the new Ruger!
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
Wow, cant wait to see the finished project.

Way to go BTW....Ezra & Wayne, you may have just cost me more money too Big Grin

Hey Wayne, wheres the pics your sending me of the 500AHR?


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
One of Us
Picture of CCMDoc
posted Hide Post
quote:
Originally posted by Bitterroot:
OK, my ears were burning. So, you found out what I wear under my shop apron. The secret's out I guess.


Good thing the folk here on AR are so open minded and non judgemental! hilbily


NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003

Don't Save the best for last, the smile for later or the "Thanks" for tomorow
 
Posts: 3465 | Location: In the Shadow of Griffin&Howe | Registered: 24 November 2007Reply With Quote
One of Us
Picture of CCMDoc
posted Hide Post
quote:
Originally posted by cmfic1:
Wow, cant wait to see the finished project.

Way to go BTW....Ezra & Wayne, you may have just cost me more money too Big Grin

Hey Wayne, wheres the pics your sending me of the 500AHR?


Wayne is always costing me more money - but I've never been disappointed!


NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003

Don't Save the best for last, the smile for later or the "Thanks" for tomorow
 
Posts: 3465 | Location: In the Shadow of Griffin&Howe | Registered: 24 November 2007Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
He did a MRC Lott for me

Hes gonna do a 404 J for me

And if he ever sends me pics of this mythical 500AHR, he might cost me more $$ while ensuring marital drama in my life Roll Eyes


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
One of Us
posted Hide Post
Ezra,

Nice.

Wayne - good work man.


NorthGaAire
 
Posts: 270 | Location: North Georgia Mtns | Registered: 06 January 2005Reply With Quote
One of Us
posted Hide Post
That's a pretty piece of wood!
 
Posts: 956 | Location: PNW | Registered: 27 April 2009Reply With Quote
One of Us
posted Hide Post


I just got these pics yesterday from Wayne!
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
posted Hide Post
Wayne comes thru again. See, you can make a silk purse out of a sow's ear!!

The man just does impeccable work.

HM Pope once told someone who asked "what is the secret to a Pope barrel": (paraphrase) there is no secret to my work. You just have to know how to do quality work. And, be willing to do it every time.

Wayne is there. I am most proud of the fact that he calls me his friend.

Rich
DRSS
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
posted Hide Post
This is a great option for somone who doesn't have big bucks to lay out but wants something nicer than factory. It is being regulated today.
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
one of us
Picture of BigBullet
posted Hide Post
Really beautiful rifle, it turned out great!


BigBullet

"Half the FUN of the travel is the esthetic of LOSTNESS" Ray Bradbury
https://www.facebook.com/Natal...443607135825/?ref=hl
 
Posts: 1224 | Location: Lorraine, NY New York's little piece of frozen tundra | Registered: 05 July 2003Reply With Quote
One of Us
Picture of Rick R
posted Hide Post
Wow! Custom rifles like that could give Ruger a good name.
beer
 
Posts: 1912 | Location: Charleston, WV, USA | Registered: 10 January 2003Reply With Quote
one of us
Picture of Sevens
posted Hide Post
That's a great looking rifle!


____________________________

If you died tomorrow, what would you have done today ...

2018 Zimbabwe - Tuskless w/ Nengasha Safaris
2011 Mozambique - Buffalo w/ Mashambanzou Safaris
 
Posts: 2789 | Location: Dallas, TX | Registered: 27 January 2004Reply With Quote
One of Us
posted Hide Post
I recognize those pegs...
 
Posts: 956 | Location: PNW | Registered: 27 April 2009Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
Now you have to shoot it with your pinky extended Wink
Quarter rib makes it look so classy. It looks lively and trim.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27616 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
One of Us
posted Hide Post
Man, that is NICE!!!


DRSS
 
Posts: 1175 | Location: Pamplico, SC USA | Registered: 24 August 2005Reply With Quote
One of Us
Picture of Von Gruff
posted Hide Post
Is it just me or does anyone else think the Ruger bolt handle could have a little less radical bend to it, but that aside that is one very nice rifle.

Von Gruff.


Von Gruff.

http://www.vongruffknives.com/

Gen 12: 1-3

Exodus 20:1-17

Acts 4:10-12


 
Posts: 2693 | Location: South Otago New Zealand. | Registered: 08 February 2009Reply With Quote
  Powered by Social Strata Page 1 2  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    AHR Upgrade on a 375 Ruger African- UPDATE with final product pictures

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia