THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    A-Square Ammunition: customer service

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
A-Square Ammunition: customer service Login/Join
 
One of Us
Picture of Badger Matt
posted
This may be a bit long winded, but I want to be sure I present all the facts accurately and completely.

- I bought a new CZ 550 in .416 Rigby and ordered a 10 round wallet of A-Square ammo.
- On or about 15 Sept, I called A-Square and spoke with Mr X. I explained to him that after successfully firing two rounds, the third one did not fire as the primer did not detonate (it was dented, to my eyes, smilarly to the others that did detonate). The next one or two subsequent rounds fired fine. He asked that I send him the entire 10 round wallet. He would determine the cause of the failure to fire and send me back a new 10 round wallet of ammunition.
- On 18 Sept, I sent the 10 round wallet back to A-Square as requested.
- Approx 7-10 days later Mr X called and said the primer was intact and the firing pin was likely underpowered. In a very friendly conversation he suggested I have the firing pin spring replaced. He was also kind enough to give me some other sound recommendations to make the rifle a better hunting tool. I've since used the CZ, after they replaced the firing pin spring, to fire 20 or so handloads and they've all fired properly.
- On 23 Oct, I called A-Square and left a message reminding them to send the promised ammo and left my phone number.
- On 31 Oct, I called A-Square, left my phone number, reminded them again of the promised ammo, and asked for a return phone call.
- On 1 Nov, I called and spoke with Mr X and he said while he was gone "it didn't get done" but that "it's being done now."
- On 14 Nov, I called and spoke with Mr X and said I would like the ammo in time for a Thanksgiving Day shoot. He said "you'll have it."
- It is now the evening before Thanksgiving and, unless Mr X is driving the ammo here personally, it won't make it here by tomorrow morning.

There are simply too many companies out there who understand customer service for me to use one who does not.
 
Posts: 1265 | Location: Simpsonville, SC | Registered: 25 June 2006Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
sorry to hear that.. and yeah, sounds like a2 still sucks... you meant mr Aa, no?

j


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
superior ammo and conley precision...

http://www.cpcartridge.com/


http://www.superiorammo.com/


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27619 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
Picture of fredj338
posted Hide Post
For the price of A-sq ammo, they should drive it to your home. Eeker Another good reason to start feeding that .416 some handloads. beer


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
One of Us
posted Hide Post
Hornady's 416 Rigby ammunition is now on dealer shelves at under $75 retail. Next question?

Rich
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
Moderator
posted Hide Post
I have one word for you: handload!

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
One of Us
Picture of Badger Matt
posted Hide Post
Around mid-October the clue bird landed on my shoulder. I've already reloaded 40 rounds (bought all but the primers, powder, and press froman AR member) but, hell, I could still use that extra 10 pieces of .416 Rigby brass Roll Eyes
 
Posts: 1265 | Location: Simpsonville, SC | Registered: 25 June 2006Reply With Quote
one of us
Picture of fredj338
posted Hide Post
quote:
Originally posted by Idaho Sharpshooter:
Hornady's 416 Rigby ammunition is now on dealer shelves at under $75 retail. Next question?

Rich

At least Hornady & Federal get you 20rds for the outragious retail they charge.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
one of us
Picture of Robgunbuilder
posted Hide Post
You just have to handload DGR cartridges. Don't ever depend on anyone else. Its like packing your own parachute. Me I handload and pack my own chutes. I'll repat the mantra. A2 and Art Alpin SUCK. What a jerk and what a jerks company! Buy their crap at your own peril.
I reject everything Art has ever said except when he said his Depends were suddenly full!-Rob


Never underestimate the power of stupid people in large numbers to do incredibly stupid things- AH (1941)- Harry Reid (aka Smeagle) 2012
Nothing Up my sleeves but never without a plan and never ever without a surprise!
 
Posts: 6314 | Location: Las Vegas,NV | Registered: 10 January 2001Reply With Quote
One of Us
posted Hide Post
Hey Rich,
Where did you find the Hornady 416 Rigby ammo?


Dana
CZ 458 Lott, 416 Rigby
375 H&H Remington C shop
50/2.5 BPC
 
Posts: 44 | Location: Buhl, Idaho | Registered: 14 November 2006Reply With Quote
one of us
Picture of foxfire
posted Hide Post
Big Cabin,
Midway is showing it online at $69.99 a box. It says coming soon: expected delivery date is 11/30/06


No good deed goes unpunished.
 
Posts: 359 | Location: Long Island, New York | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Big Cabin aka Dana,

I am the guy in Nampa that you got the 458 Whitworth from!! Yes! That Rich! Natchez Shooters Supply has it for $64 a box. When are you coming to the Big City again? I need to see the VA Dr about my knee MOnday at 9...make it to B&B and let us do lunch!

Rich

PS: I have two CZ 550's in 416, both shoot the solids and softpoints under 2" at 100yds with a Tasco Pro Point, and the groups are in a 3" round cluster.
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
one of us
posted Hide Post
Rich, 'er Stumpy,

You're going to see old "Buzz Saw Bones" at the VA? You do have more courage than sense!

Good luck,
LD


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
Administrator
posted Hide Post
quote:
Originally posted by Badger Matt:
This may be a bit long winded, but I want to be sure I present all the facts accurately and completely.

- I bought a new CZ 550 in .416 Rigby and ordered a 10 round wallet of A-Square ammo.
- On or about 15 Sept, I called A-Square and spoke with Mr X. I explained to him that after successfully firing two rounds, the third one did not fire as the primer did not detonate (it was dented, to my eyes, smilarly to the others that did detonate). The next one or two subsequent rounds fired fine. He asked that I send him the entire 10 round wallet. He would determine the cause of the failure to fire and send me back a new 10 round wallet of ammunition.
- On 18 Sept, I sent the 10 round wallet back to A-Square as requested.
- Approx 7-10 days later Mr X called and said the primer was intact and the firing pin was likely underpowered. In a very friendly conversation he suggested I have the firing pin spring replaced. He was also kind enough to give me some other sound recommendations to make the rifle a better hunting tool. I've since used the CZ, after they replaced the firing pin spring, to fire 20 or so handloads and they've all fired properly.
- On 23 Oct, I called A-Square and left a message reminding them to send the promised ammo and left my phone number.
- On 31 Oct, I called A-Square, left my phone number, reminded them again of the promised ammo, and asked for a return phone call.
- On 1 Nov, I called and spoke with Mr X and he said while he was gone "it didn't get done" but that "it's being done now."
- On 14 Nov, I called and spoke with Mr X and said I would like the ammo in time for a Thanksgiving Day shoot. He said "you'll have it."
- It is now the evening before Thanksgiving and, unless Mr X is driving the ammo here personally, it won't make it here by tomorrow morning.

There are simply too many companies out there who understand customer service for me to use one who does not.


Not sure about the current A-Square ammo.

But, when Art Alpin was in charge, he "donated" some ammo to the PH orgenization of an African country.

Lots of that ammo turned out to be dud!


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 69676 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
As Jeffe said, It's really nice to know that A2 is still A1 in the customer service department.

Gee, I wonder if they are still taking orders and people's money and not delivering products?

The Legacy Lives!


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
One of Us
posted Hide Post
Lawndart,

I'm seeing Dr Belau. The surgical techniques there are much improved. Before, they would have used a chainsaw. Now, they have upgraded to a mini-sawsall! Got my 9.3x62...wow!

Rich
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
posted Hide Post
Hey Rich,
I knew it was you. Hopefully I will have your $$ for you next week or the week after. More of that good chinese would really hit the spot.

Does A2 have a web site? (anyone). If they do, none of the search engines I tried could come up with it.


Dana
CZ 458 Lott, 416 Rigby
375 H&H Remington C shop
50/2.5 BPC
 
Posts: 44 | Location: Buhl, Idaho | Registered: 14 November 2006Reply With Quote
one of us
posted Hide Post
I just love it when Rob gets his dander up. Must be be waiting on an order, Smiler. Me, I have been waiting 6+ years after numerous contacts. How do these guys stay in business???????????

Dak
 
Posts: 495 | Location: USA | Registered: 25 December 2003Reply With Quote
one of us
Picture of foxfire
posted Hide Post
Big Cabin,
Here's their web site. Though after listening to everyone here why would you want it?
A-Square


No good deed goes unpunished.
 
Posts: 359 | Location: Long Island, New York | Registered: 28 November 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    A-Square Ammunition: customer service

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia