Go | New | Find | Notify | Tools | Reply |
One of Us |
I'll have to disagree with the both of you here, it's a fallacious existential question. | |||
|
One of Us |
Nosler is my first choice only if I can pick up factory seconds. Hornady tends to be my go-to if I can't get Factory Seconds. "We are what we repeatedly do. Excellence, then is not an act, but a habit"--Aristotle (384BC-322BC) | |||
|
one of us |
Here is the order in which I would miss them if they were gone: 1. Nosler 2. Sierra 3. Speer 4. Hornady 5. Berger, Swift, Win, Rem, Norma, Lapua, Midway, Grafs, NF, TB, Woodleigh, etc. 17. Barnes | |||
|
One of Us |
I was introduced to Nosler partitions in 1952 when I was in gunsmith school. I have used them almost exclusively since then. I will admit I did try one box of Swift's but did not load the whole box as I was not impressed with them. And I did use Woodleighs for my solids for Africa. Other than those two lapses I have used Nosler Partitions for almost 60 years. I will admit to starting my new 257 Roberts on Accubonds because the dealer was out of Partitions at the time in the weight I wanted. At this late date I'm not about to change what to me is a proven bullet. SCI Life Member NRA Patron Life Member DRSS | |||
|
one of us |
Nosler for me. I've used quite a few brands but if all the rest went away and Nosler was the only company producing bullets I could be very happy. Mark MARK H. YOUNG MARK'S EXCLUSIVE ADVENTURES 7094 Oakleigh Dr. Las Vegas, NV 89110 Office 702-848-1693 Cell, Whats App, Signal 307-250-1156 PREFERRED E-mail markttc@msn.com Website: myexclusiveadventures.com Skype: markhyhunter Check us out on https://www.facebook.com/pages...ures/627027353990716 | |||
|
One of Us |
Most hypothetical questions are dumb so fair enough. | |||
|
one of us |
If I had to pick one bullet by manufacturer for all big game in all big game calibers then it would definately be the Nosler Partition and I would hope you would grace me with a few solids in case I want to go into the bush after a wounded buffalo or shoot an elephant. I do however realize that North Forks, Woodleighs and GS Customs bullets are just as good in 99% of the cases.. One thing I'm sure of is that showing a picture of an animal killed with any rifle or caliber only means it worked that one time and good game bullets should be proven over years of successful kills under various circumstances, and the Nosler is the bullet by which all others are judged. That about sez it all. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
One of Us |
Ray, The original question was concerning the bullet manufacturer. If you choose Nosler you get to shoot anything in Nosler's line including solids. | |||
|
One of Us |
One more time for S & G's. I'd posted this before in the long range forum. I'm killing with 22 cal, 60 gr. partitions, 70 gr. barnes TSX 25 cal, 100 gr ballistic tips, 100 gr. partitions, 110 gr. accubonds 6.5mm, 130 gr. Accubonds .277, 130 gr. ballistic tips .284, (7mm-08, 7mag, 7x57 & 7 stw) 140 gr. accubonds, 150 gr. ballistic tips .308, 150 gr., ballistic tips and accubonds, 168 gr. ballistic tips and Barnes TSX, in the past, 180 gr. partitions. 8mm, 180 gr ballistic tips 338, 210 Gr. Barnes TSX, 225 Gr. Accubonds 350, 225 gr. accubonds, 225 gr Sierra Game Kings 366, 250 gr Accubonds 375. 260 gr Accubonds I find that almost any rifle will shoot Ballistic tips, Partitions, not as universal, the Accubonds shoot as good as the ballistic tips and always pass through. Hole going in, hole going out. Almost always a blood trail. Almost never need a blood trail. Excellent BC's, not as good as Match kings or berger VLD's, but not shabby. I've had excellent luck with Triple shocks on deer, Accubonds on deer and hogs. I've lost a couple hogs with triple shocks. But it may have been bad shot placement on my part And for Ray A., a couple more pix. I also will note, this is only my experience over the last decade plus. GWB 25-06, 110 gr. accubond 7mag, 150 gr. Nosler Ballistic Silvertip 30-06, 180 gr Nosler partition 325 WSM, 180 gr. Nosler Ballistic Tip 260 Rem, 120 gr. Nosler Ballistic Tip 257 Weatherby, 100 gr. partiton 30-06, 180 gr. partition 270 Win, 130 gr. ballistic tip | |||
|
One of Us |
While I have had fantastic results with NorthFork. I think I'll be changing my tune to Cutting Edge Bullets. We Band of Bubbas N.R.A Life Member TDR Cummins Power All The Way Certified member of the Whompers Club | |||
|
One of Us |
Barnes is my go to bullet now. I usually go with the tipped. | |||
|
One of Us |
That's an interesting rifle Geedub, what is mate? Is that an octagonal barrel as well? | |||
|
One of Us |
Amir, I've a longstanding love affair with single shot rifles. That particular rifle is a Browning Hi-Wall chambered in 30-06. Yes, octagonal barrel, 28" in length. Gets just about 300 win mag velocity with 180 gr partitions. The Browning B-78 and 1885 High walls are copies of the Winchester 1885. Another Browning Hi-Wall, 454 Casull Here is one more, a Winchester 1885 Highwall chambered in 270 WSM. Typical accuracy is an inch or better with my handloads. However, who would think you could get this kind of accuracy out of a straight wall pistol cartridge at 100 yds. Best GWB | |||
|
One of Us |
Hunting only, Nosler without hesitation... Member NRA, SCI- Life #358 28+ years now! DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set. | |||
|
One of Us |
Very nice Glen, very nice indeed. I'll have to see these in person one day you know, are you any closer to being able to getting out here for that hunt I promised you? Best, Amir | |||
|
One of Us |
Me too - after I used Nosler BT & PT for a long time, I am absolutely fascinated of the Woodleighs... Absolutely Perfect! | |||
|
One of Us |
If I had to pick one bullet,and only one,I'd have to stay with Sierra,these bullets have always done what I have asked of them,and so have other manufacturers,but I'm loyal to Sierras ....BB34 Dead pigs are Happy pigs ! | |||
|
One of Us |
+1 Load Partition and be Happy , I am. | |||
|
One of Us |
I normally don't use factory loads, but sometimes the situation calls for it. So, I bought some Nosler 165 gr ABs in 308 to use for some Texas hog hunting. I expected good results, but even with that I was surprised. That is the most accurate factory ammo I have ever shot, and it's just a shame how easy it makes whacking hogs at any reasonalble range. Somehow I feel there should be a challange in that. I head shot a piglet at 150 yds with confidence. I like the Accubonds, but I'll hedge a little about saying I would use them exclusively since I'm using a few Barnes TSX and TTSX, which have impressed me greatly. I just can't decide which I like better. I think it depends on the game. For deer and hogs, no doubt, Accubonds are way better than necessary. If I had to pick one for the 375 or 458, I think it would be a Barnes for those calibers, simply because of the probability of 100% weight retained. I think it matters for the big bores, and not so much for the use which I would ask of the smaller calibers. However, last year I tried some Barnes 168gr TTSX bullets in my old standby, a FN 30-06, and quickly dedicated that rifle to shooting the 168gr TTSX exclusively. I havent shot game with it yet, but the accuracy was so good that I just can't see any need in further load development for that rifle. I have tried woodleighs in three calibers, 30, 35 & 375, and I just can't get the accuracy out of them. They are Ok, but not great. I'm sure they will hold together alright, and I'll use them over time. I have some loaded for my 35 Whelen now, and plan on useing them soon, but frankly every other bullet I've tried in that rifle has been more accurate, including swift, speer, hornady, and nosler. I'm not talking about much difference, just noticable. KB ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~ ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~ | |||
|
One of Us |
Overall, I would have to say Hornady as I have shot tons of them over the years. It is real hard to beat Nosler, though. My buddy also cannot get the Woodleighs to shoot well. I think this day and age, any manufacturer would work fine if all others went away. I don't think there are really any bad bullet makers. | |||
|
One of Us |
Barnes. I have tried a bunch adn they are all good but my rifles like triple shocks. | |||
|
One of Us |
Nosler for sure. BT's and Accubonds. | |||
|
One of Us |
TIG BULLETS FROM BRENNEKE,OLD DESIGN BUT STILL PERFECT | |||
|
One of Us |
Swift for me, thank you. Scirocco and A-Frames. Phil Massaro President, Massaro Ballistic Laboratories, LLC NRA Life Member B&C Member www.mblammo.com Hunt Reports- Zambia 2011 http://forums.accuratereloadin...6321043/m/1481089261 "Two kinds of people in this world, those of us with loaded guns, and those of us who dig. You dig." | |||
|
One of Us |
Nosler AND Speer Best I can do | |||
|
One of Us |
Tough call for me. I like Speer and Hornady about the same. But I am especialy fond of speer Mag Tips, unfortunatly they seem to be going by the wayside. Those bullets are diamonds in the ruff.. Im not too sure about their new line up yet but Im sure the grand slams are excellent. Hornady interlocks just plain work and I like that they havent fallen into the revamp and inflate the cost syndrome yet. Nosler makes an excellent product, but I personaly find them too cost prohibitive to do a lot of shooting with. Id rather go with one bullet that is affordable enough to shoot a LOT and yet performs well on game.. That is pretty much the definition of Hornady IMO. Same could be said for Remington core locts, but they dont have the variety of the Hornadys. AK-47 The only Communist Idea that Liberals don't like. | |||
|
One of Us |
Hornady.....hands down. Larry Gibson | |||
|
One of Us |
I recently picked 3 boxes of 7mm 160 MAGTIPS for $12 a box on Midway. I think they found some old stock and liquidated them. They didn't last long. I haven't worked up any loads for them yet. | |||
|
new member |
Accubonds in the .338, TSX in the '06. I tried and tried to get TSXs to shoot in my .338. 1.5 to 2.5" groups were the norm. Tried 250 Accubonds and Gamekings and the groups shrank to about 1" or less. Had the same trouble with my '06 and 180 TSXs using IMR4350. Groups improved tremendously when I switched to 4064. Just curious, anyone else had trouble getting better than mediocre accuracy with TSX? | |||
|
One of Us |
| |||
|
One of Us |
If they were provided to mee free it would be Partitions. If you are going to make me buy mine Im going to shoot the plain old Power points and cor-lokt , although I have shot many Hornadys and had many picture perfect mushrooms when recovered. Cal30 If it cant be Grown it has to be Mined! Devoted member of Newmont mining company Underground Mine rescue team. Carlin East,Deep Star ,Leeville,Deep Post ,Chukar and now Exodus Where next? Pete Bajo to train newbies on long hole stoping and proper blasting techniques. Back to Exodus mine again learning teaching and operating autonomous loaders in the underground. Bringing everyday life to most individuals 8' at a time! | |||
|
One of Us |
People usually like the opinions of good experienced PHs because they have seen it all and have to put their lives on the line frequently and need to rely on their tools of the trade. With no monetary reward or sales BS I think this recent response from a PH says it all for me that CEB is number one with #2 slot being North Fork Bullets.
577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
one of us |
Hmmm...I've got boxes of most of them and like several of them. I plan on trying the CEB soon but haven't yet so can't speak to it. But so far (and as much as I like custom bullets) I'd have to say that if limited to only one brand I'd probably stick with Remington bulk bullets. I'm not particularly cheap in that regard, but for for me they have worked on game for so long and so well that I'm hard pressed to turn them down. If I ever move to Africa I'll reconsider. But fortunately we don't have to make that decision, eh? "Experience" is the only class you take where the exam comes before the lesson. | |||
|
One of Us |
NOSLER for me | |||
|
One of Us |
Barnes for almost every thing,224/243/6.5mm/270/7mm/8mm/338/9.3mm/458 Sierra for 204. DRSS | |||
|
one of us |
That's easy - Nosler. Antlers Double Rifle Shooters Society Heym 450/400 3" | |||
|
one of us |
Nosler Partitions...but I'd have to have some solids from GS Customs for elephant. If that is not allowable then I would have to say the North Fork cup point, it would be a little bit of a trade off but it works on everything well enough to get by.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
One of Us |
My casting pot doesn't count does it??? Nosler if I'm getting serious. Cheers, John Give me COFFEE and nobody gets hurt | |||
|
new member |
Noslers. I've used Partitions for close to 40 years, but am now growing fond of Accubonds, regardless of caliber. | |||
|
one of us |
Nosler, for me, too. Love the Accubonds and the Ballistic Tips, miss the old Solid Bases, too. Hornady is probably my second choice, but Nosler definitely No. 1. The only exception being my 6.5x55 Howa. It definitely prefers the Hornady 129 and 140 gr Spire Points to anything else. Bullets are pretty worthless. All they do is hang around waiting to get loaded. | |||
|
Powered by Social Strata | Page 1 2 3 |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia