THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Ebony Question
 Login/Join
 
ElCaballero
one of us
Picture of ElCaballero
posted
How big does a piece need to be for a forearm tip? is 1.5" x 1.5" x 2" enough?


As a general rule, people are nuts!
spinksranch.com
 
Posts: 2094 | Location: Missouri, USA | Registered: 02 March 2002Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
wes,
i buy 2x2 sticks and work down from there


#dumptrump

opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 38501 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Jim Kobe
One of Us
posted Hide Post
Way plenty big enough.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Cusom Gunmakers Guild

 
Posts: 5503 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
ramrod340
one of us
Picture of ramrod340
posted Hide Post
I just measure the two rough stocks I have with a Ebony tip. 1.5" both ways just covers with about 1/8" up & down. So measure 4 times and cut once.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
Bent Fossdal
One of Us
Picture of Bent Fossdal
posted Hide Post
I like to make them longer if the forend is longer, but 2" is the longest i have made. 1.5 is the shortest, and I really do not like them shorter.


Bent Fossdal
Reiso
5685 Uggdal
Norway

 
Posts: 1707 | Location: Norway | Registered: 21 April 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia