The Accurate Reloading Forums
Ebony Question

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/555109856

16 April 2007, 07:17
ElCaballero
Ebony Question
How big does a piece need to be for a forearm tip? is 1.5" x 1.5" x 2" enough?


As a general rule, people are nuts!
spinksranch.com
16 April 2007, 08:23
jeffeosso
wes,
i buy 2x2 sticks and work down from there


opinions vary band of bubbas and STC hunting Club


Words aren't Murder - Political assassination is MURDER
Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
16 April 2007, 18:51
Jim Kobe
Way plenty big enough.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Former Professional member American Custom Gunmakers Guild

16 April 2007, 23:50
ramrod340
I just measure the two rough stocks I have with a Ebony tip. 1.5" both ways just covers with about 1/8" up & down. So measure 4 times and cut once.


As usual just my $.02
Paul K
17 April 2007, 00:03
Bent Fossdal
I like to make them longer if the forend is longer, but 2" is the longest i have made. 1.5 is the shortest, and I really do not like them shorter.


Bent Fossdal
Reiso
5685 Uggdal
Norway