The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Double Rifles New small frame V-C 375 FlangedGo | New | Find | Notify | Tools | Reply | |
| New small frame V-C 375 Flanged | Login/Join |
| One of Us |
I wanted to show this off, first small frame in 375 Flanged. This is the same frame V-C uses for the 9.3 so it feels very nice in the hand. This gun features double triggers, automatic ejectors, 26” barrels, 14 3/4” LOP, french gray receiver, right handed shadow line cheek piece,, hand checkered, palm swell, steel grip cap, scroll hand engraving, sling swivels, scope bases at a weight of 8lb 11oz. Of course this can be made as fancy or as plain as the customer wants and runs approx $2,000 less than the same large frame gun would cost.         Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | ||
|
One of Us |
OMG! Time to count my pennies. | |||
|
One of Us |
Extremely Nice!  NRA Lifer; DSC Lifer; SCI member; DRSS; AR member since November 9 2003 Don't Save the best for last, the smile for later or the "Thanks" for tomorow | |||
|
One of Us |
what a great looking gun and neat cartridge. Love to see one in a 300 H&H Flanged USN (ret) DRSS Verney-Carron 450NE Cogswell & Harrison 375 Fl NE Sabatti Big Five 375 FL Magnum NE DSC Life Member NRA Life Member | |||
|
| One of Us |
Do you want it stocked for your dimensions? I'll have a second one here the shortly with two barrels, 303 and 375 F Mag. That one is stocked for my dimensions. Here it is a few months ago after engraving.  Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
one of us |
It may be small framed but not small enough. The small frame 375 H&H Heym's are/were in the 7+ lb class. Don't know whether they are still made. ------------------------------- Will Stewart / Once you've been amongst them, there is no such thing as too much gun. --------------------------------------- and, God Bless John Wayne. NRA Benefactor Member, GOA, N.A.G.R. _________________________ "Elephant and Elephant Guns" $99 shipped “Hunting Africa's Dangerous Game" $20 shipped. red.dirt.elephant@gmail.com _________________________ Hoping to wind up where elephant hunters go. | |||
|
| One of Us |
Size and weight are two different measurements. The regularly make 9.3x74R's on the same frame under 7lb. So if you want a light weight gun all you need to do is tell me what your target weight is and we can order one up for you. Probably save a ton of weight by just putting a single trigger in for you. Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
Nicely done! Thank you for posting. Cliff NRA Life Member CMP Distinguished Rifleman NRA Master, Short and Long Range | |||
|
| One of Us |
Very nice indeed. Re weight, take of the scope bases, shadow line cheek piece, steel grip cap, put in a single trigger and you have your under 8lb DR. . | |||
|
| one of us |
 Indeed, more tactful than I! A 7.5 lb 450/400? ------------------------------- Will Stewart / Once you've been amongst them, there is no such thing as too much gun. --------------------------------------- and, God Bless John Wayne. NRA Benefactor Member, GOA, N.A.G.R. _________________________ "Elephant and Elephant Guns" $99 shipped “Hunting Africa's Dangerous Game" $20 shipped. red.dirt.elephant@gmail.com _________________________ Hoping to wind up where elephant hunters go. | |||
|
| One of Us |
Maybe, you window shopping or are you ready to step up if they say they can do it? Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
Soon Ken, Soon. Any more pics of mine? USN (ret) DRSS Verney-Carron 450NE Cogswell & Harrison 375 Fl NE Sabatti Big Five 375 FL Magnum NE DSC Life Member NRA Life Member | |||
|
| One of Us |
Factory is closed until 8/22. Yours should be near completed Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
Forgot about that. They say the mind's the second thing that goes....  USN (ret) DRSS Verney-Carron 450NE Cogswell & Harrison 375 Fl NE Sabatti Big Five 375 FL Magnum NE DSC Life Member NRA Life Member | |||
|
| one of us |
I'm kickin' tires. But it would be nice to know. ------------------------------- Will Stewart / Once you've been amongst them, there is no such thing as too much gun. --------------------------------------- and, God Bless John Wayne. NRA Benefactor Member, GOA, N.A.G.R. _________________________ "Elephant and Elephant Guns" $99 shipped “Hunting Africa's Dangerous Game" $20 shipped. red.dirt.elephant@gmail.com _________________________ Hoping to wind up where elephant hunters go. | |||
|
| One of Us |
Wow Ken, what a lokker! How much does the second setof (303) barrels add to the bills? | |||
|
One of Us |
Ken, I don't see this rifle listed on your website. Do you have one in stock and if so can you send me some info on it? Thanks. | |||
|
| One of Us |
I love everything about this rifle except the beavertail fore-end. I don't get it with VC and Chapuis? What's the deal with the beavertails? Otherwise, the weight, the caliber especially, and the overall look is great. I'm still hoping Merkel will come to their senses and offer a small framed 140A in .375 Flanged. It would be hotter than one could imagine (with good wood of course). Mike JP Sauer Drilling 12x12x9.3x72 David Murray Scottish Hammer 12 Bore Alex Henry 500/450 Double Rifle Steyr Classic Mannlicher Fullstock 6.5x55 Steyr Classic Mannlicher Fullstock .30-06 Walther PPQ H2 9mm Walther PPS M2 Cogswell & Harrison Hammer 12 Bore Damascus And Too Many More | |||
|
| One of Us |
mdstewart Interesting point. It's amazing what you notice and don't notice when you first look at pictures of guns. I agree, a nice splinter type for end would really make the lines of that gun. Just my HO of course. . | |||
|
One of Us |
V-C can (and did) build a nice splinter fore-end. Check here | |||
|
One of Us |
C'mon Will Perhaps Ken will take 350 Elephant wallets in trade...IF the stitches are straight.  Deo Vindice, Don Sons of Confederate Veterans Black Horse Camp #780 | |||
|
| One of Us |
I think we can do the weight or get damn close unless you want something like 30" barrels Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
A good rule of thumb is that a extra set of barrels and forearm will cost about 40% of the gun Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
Its already promised to someone here on AR. Check your PM's. Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
V-C makes what I ask for, if you want the gun with a splinter that is how it is ordered. There are no guns sitting finished at the factory, every gun is made to order as the customer specifies Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
350 wallets....uh no. I might take one or two Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
Ok I am going to put a spanner in the works here.Do you guys like this model or the under & over version better?I was looking to get the under and over as i think it looks better when its scoped(450-400) but this makes me think twice now damn it!  | |||
|
| one of us |
I like it very very much. I think 8 to 9 lbs is pretty right for that caliber. | |||
|
one of us |
Ken: I remember you talking about this gun when we were discussing Husqvarna shotties. It is just gorgeous, and I like the weight. The 9,3 is a lovely little wand, but it just doesn't have any "hang" out front. I might need to unretire and start saving for the .375 flanged. Would you consider an original Springfield NRA Sporter as down?  There is hope, even when your brain tells you there isn’t. – John Green, author | |||
|
| One of Us |
This pic, those boulsters, deserves another run, those curves are enough to make a man break out in a cold sweat...... Did we ever see the finished gun? Rhodes | |||
|
| One of Us |
Shell that photo represent a fake side lock? I.e. they will not essemble the lock on the sideplate and only fill the holes with pinns! The box lock can be seen behind as well as the spiral spring. Or is that a Vierling using two Sidelocks and two boxlocks. I have not known that AVC make fake sidelocks, only Bernerdeli is known for that. But in that case I have alyways to look in. | |||
|
| One of Us |
Its a sideplate with pins, never said it a sidelock. V-C did it for me as a special request. The mgr of the V-C custom shop was not crazy about the idea but even he agreed it came out very pretty in the end. As I explained to him at SCI.....look around the room, many of the women have fake boobs but it does not stop me (and many men) from admiring them and liking the "look", same with the pins. Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
| One of Us |
 | |||
|
| One of Us |
The guys at VC must have been drunken when they have taken that order, they will for ever been know as builders of fake sidelocks. (AVC is in that case, same class as Bernerdelli) For the company it is a reprutation killer and for the client an absolute no go. I would wear a paperbag over my head while shooting at the range with that rifle, the absolut shame. For the money you get a Merkel or Heym sidelock, better no engraving then a fake sidelock. PS: Please post a pic of your GF | |||
|
| One of Us |
beno That's a bit strong. It's not a "fake sidelock", it's a Sideplated boxlock. Plenty of English companies made Side plated guns. Bespoke guns are made to the customers requirements, not the makers. If you walk into Purdey, Holland, Boss or any maker and are willing to pay, they will make it. I have also heard it said that sometimes, people don't want a Sidelock but want the metal to be able to engrave. And I am sure VC will survive what the market thinks over making of this rifle. Previously 500N with many thousands of posts ! | |||
|
| One of Us |
Good lord what a storm in a teacup I'm sorry I even brought this thread back up now.... | |||
|
| One of Us |
at 505G The AVC above is the true fake sidelock. It is not only as done many times, just a long side plate, there are pins added that it looks like an old sidelock. The pins have no fuction, they even interrubbed the sideplate (engraving). Probably they even make a moveable axis in so that cocking indicator works. AVC will probably soon engrave Holland + Holland on their guns if the clients want? What say AVC about that??? That is not real or is it? | |||
|
one of us |
Kebco, can this one be made with 24 inch barrels, and a splinter fore end? The 26 inch makes the rifle look out of balance, and 26 inch barrels are not needed for a 375FL mag double rifle. This is a beautiful little rifle otherwise! .......................................................................  ....Mac >>>===(x)===> MacD37, ...and DUGABOY1 DRSS Charter member "If I die today, I've had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"~ME 1982 Hands of Old Elmer Keith  | |||
|
| One of Us |
The answer is yes, they will be happy to make a gun with 24" barrels and with a splinter fore end. Ken DRSS, PP Chapter Life NRA Life SCI Life DSC | |||
|
One of Us |
Absolute rubbish,VC is a fine gunmaker,your comments are slanderous,& it does appear that you also have no sense of humor  DRSS | |||
|
| Powered by Social Strata | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Double Rifles New small frame V-C 375 Flanged
Visit our on-line store for AR Memorabilia