The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Wildcats And Their Development 9.3x64 Brenneke spread to 416?Go | New | Find | Notify | Tools | Reply | |
| 9.3x64 Brenneke spread to 416? | Login/Join |
| One of Us |
Has someone done this already? Thanks Andy B We Band of Bubbas N.R.A Life Member TDR Cummins Power All The Way Certified member of the Whompers Club | ||
|
One of Us |
Kind of seems like an expensive way to get a 416 Ruger you can't find ammo for. Neat idea if we didn't have the 416 Ruger. | |||
|
Moderator |
not that I am aware of -- as you can make x64 cases from turning down HH cases, the results would be very close to a 400HH -- not exactly a 416 rem, due to taper and capacity - so, it would be an easy rework a 3006 or 7 rem mag to this config, a bit of work to make reamers, dies, and brass, and wind up with a 416 that has been matched ... sort of like turning the belt off a 416 rem, so to speak opinions vary band of bubbas and STC hunting Club Words aren't Murder - Political assassination is MURDER Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
A chap on another forum asked about it and I recommended he ask here. Said he had no desire, so I asked. Thanks for the info gents. I'll pass it along. Andy B We Band of Bubbas N.R.A Life Member TDR Cummins Power All The Way Certified member of the Whompers Club | |||
|
| One of Us |
Yes until you get to Fairbanks or Windhoek with no ammo. | |||
|
| Moderator |
that's more or less entirely irrelevant in the WILDCAT forum... You know, where we discuss wildcats -- not where we discuss piss poor planning for a trip. btw, i do firmly believe that EVERY case of gun-but-no-ammo could have been avoided by better planning my 416 AccRel is obviated by the 416 ruger - that's cool ... in fact, somewhat complementary .. this case, as presented, wouldn't make a ruger equal -- it would make about a 400hh 9,3x64 is smaller a than 375hh which is smaller than a 416 rem which is smaller than a 416 ruger, which is smaller than a 416 Accrel .... without bothering to do the math, its going to be larger than a 416 taylor, and smaller than a 416 remington ... opinions vary band of bubbas and STC hunting Club Words aren't Murder - Political assassination is MURDER Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
boomie asked me to neck up a x64 case to 416. Wasn't much of a shoulder.
| |||
|
| Moderator |
yep .. i wouldn't expect much, unimproved - which is why i think it would be more or less about a 400 hh ---  its early!opinions vary band of bubbas and STC hunting Club Words aren't Murder - Political assassination is MURDER Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
   | |||
|
| One of Us |
The chap that asked about it lives in Sweden and RUM brass is apparently non-existent. Says he has shit piles of Brenneke brass and was curious about doing such. Andy B We Band of Bubbas N.R.A Life Member TDR Cummins Power All The Way Certified member of the Whompers Club | |||
|
| Moderator |
then he'd have something nifty -- and it would smack a mosse can he get 404 brass? you can make my carts from 404 brass opinions vary band of bubbas and STC hunting Club Words aren't Murder - Political assassination is MURDER Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Wildcats And Their Development 9.3x64 Brenneke spread to 416?
Visit our on-line store for AR Memorabilia