Go | New | Find | Notify | Tools | Reply |
One of Us |
am thinking about the possibility of building one of these and would like some feedback on good and bad experiences with this caliber. i primarily would like to target 180 grain bullets and interested about velocity etc. etc. bounty hunter | ||
|
One of Us |
300 wsm? load it down for the desired velocity. and save $$$ or 30-284 or 30-steyr short for a beltless version. why the rem mag case? 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
One of Us |
come on boom stick----everybody has a 300 wsm---that's way too practical i need something that keeps me occupied with meaningless tasks, that does less than something simple. i want a 30/350 rem mag to keep from wanting one. b h | |||
|
one of us |
The late, great P.O. Ackley said that there is no possible excuse for the 30/350 (7.62x55) except in a short action like the Rem M600. He didn't think too much of the cartridge. You need to read his comments. He lists 180 grain loads at 2875fps. Ray Arizona Mountains | |||
|
One of Us |
hey man...via con dios...if it makes you smile i will not be the one to say stop. thar be nothing practical in wildcatn' 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
One of Us |
AMEN phil 4:6 b h | |||
|
one of us |
No first hand experience with this one. But if my data is correct the 350Rm has a capacity of 75 grs the 35 Whelen is 73. So wouldn't a 300/350 really just be a 30-06 in a short action? As usual just my $.02 Paul K | |||
|
Moderator |
308/284 300 saum 300wsm 30x57 imp 308 30-06 opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
I had a remington 600 in 30-350remington mag. I picked it up secondhand for a song. It was a fun little round that did what I expected it to(nearly match the 30-06). If I had it on a longer action, I would have probably liked it better, but it worked out ok...I sold it to a hunting buddy who just had to have it. Makes no sense in today's world with the 300 wsm as a factory round. | |||
|
One of Us |
Is there a better reason? ______________________ Are you gonna pull those pistols or whistle Dixie? | |||
|
new member |
I shoot a .30x350 mag because I was given a 600 Rem that someone had put a Mag bolt into a .308 action and the guy couldn't figure out why the bolt wouldn't grip the case head. I took it to my gunsmith and had it rechambered. I use .30-06 data but I don't quite get 06 velocities due to the 18' barrel. Damn fun gun and at 6.5 pounds scoped easy to carry. | |||
|
One of Us |
i built one of these maybe 20 years ago, whenever the mod 7 came out. i shot the 150 gr bullets only. it's kindof a short mag before the term short mag.i remember shooting around 3150-3200 fps with a 22" barrel and the case holding a bit more powder than an 06. i have an 11 twist, CM barrel chambered for this with a mat finish and muzzle brake that came off a mod 7 action and a FL die i'd part with if anyone's interested. | |||
|
new member |
I'd like to buy your FL die PM sent Cazador | |||
|
One of Us |
Hey Caz ! mabye go the other way and build a 9.3 X350 rem. Or to really confuse folks just call it the .366rem mag !...tj3006 freedom1st | |||
|
One of Us |
Heres what a .30/350mag could look like done on M70wsm receiver. 3"+ magbox,bolt face ready to go,feeds fine.... all right&ready to accept your .30/350rm. I could suffer something like that .in 7mm,.308,.338,.358,.375/350Rm-without much complaint. and while were at it, heres a .350reMag done on m70wsm receiver. Brad put me onto the existence of this rifle, from 24hrCampfire. | |||
|
One of Us |
woodjack very nice piece. you should be proud b h | |||
|
new member |
Mr.Jones, you may be on to something. I figured the .30x350 was a little off the wall but the idea of a short .366 is starting to get my juices flowing. Something to really think about. Thanks for the suggestion. | |||
|
one of us |
Cazador, you would get 30-06 velocities if your 30-06 had an 18" bbl. **************** NRA Life Benefactor Member | |||
|
one of us |
I did one many years ago for a guy in Hawaii as a walking rifle for big hogs and perhaps a wild steer. He got a tad over 3000 fps with the 165s in a 22" barrel and 2900+ withe the 180s. Know it worked really good. I cut the chamber with a piloted 6.5 RM reamer and then neck/throated with a separate reamer. Saved a bunch on a custom reamer.Good luck. Aloha, Mark When the fear of death is no longer a concern----the Rules of War change!! | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia