THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    The Stuff That Dreams Are Made Of

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
The Stuff That Dreams Are Made Of Login/Join
 
One of Us
Picture of MJines
posted
. . . when I get around to building another custom it will be the identical twin to this rifle in .318 Westley Richards. The lines on this rifle are damn near perfect in my opinion. And yes I know it is not a big bore, but the folks on the big bore forum are the ones that can really appreciate a rifle of this style.



Mike
 
Posts: 22108 | Registered: 03 January 2006Reply With Quote
One of Us
posted Hide Post
i thought the 318 WR and its modern twin, the 338-06 was no good as compared to the 9.3? that is gorgeous!
 
Posts: 2267 | Location: Maine | Registered: 03 May 2007Reply With Quote
One of Us
Picture of BaxterB
posted Hide Post
I have drooled over that rifle ever since I saw it in their catal;og, It may be damn neat perfect to you, but I think it is perfect; i do not see one thing I would change.
 
Posts: 7843 | Registered: 31 January 2005Reply With Quote
One of Us
Picture of 505ED
posted Hide Post
I've always liked the look of the WR pat front sight.

Ed


DRSS Member
 
Posts: 2289 | Location: Texas | Registered: 02 July 2005Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by 505ED:
I've always liked the look of the WR pat front sight.

Ed


Yes, they look good but are not all that practical.
They need to be open to get a good view, but when open they are a point to snag bushes.
I still like it though.


Since seeing that picture years ago, the WR has been "a" most desirable rifle for me...
So when I found this .425WR in Africa, there was only one thing to do..
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
One of Us
posted Hide Post
I'd go with a different floor plate release.
Fabulous rifle though!



Cheers
Tinker


_________________________________
Self appointed Colonel, DRSS
 
Posts: 802 | Location: Palomino Valley, NV | Registered: 26 April 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by a.tinkerer:
I'd go with a different floor plate release.
Fabulous rifle though!
Cheers
Tinker


Ditto.
I too think that is the raciest piece of gunporn ever!
Though I would not kick her out of bed just over her floor plate release,
I would want the fashionistas at Bell & Carlson to make her a "Kevlar" skirt, shaped just like the one that Westley Richards did in walnut.
Her cup size would also be more desirable at 404J instead of 318WR.
Then she would be ready for some rough riding.
And I want her identical twin in stainless with Gunkote makeup too. hilbily
 
Posts: 28032 | Location: KY | Registered: 09 December 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by RIP:
quote:
Originally posted by a.tinkerer:
I'd go with a different floor plate release.
Fabulous rifle though!
Cheers
Tinker


Ditto.
I too think that is the raciest piece of gunporn ever!
Though I would not kick her out of bed just over her floor plate release,
I would want the fashionistas at Bell & Carlson to make her a "Kevlar" skirt, shaped just like the one that Westley Richards did in walnut.
Her cup size would also be more desirable at 404J instead of 318WR.
Then she would be ready for some rough riding.
And I want her identical twin in stainless with Gunkote makeup too. hilbily


So .....?? A totally different dame then!!

Big Grin
 
Posts: 13301 | Location: On the Couch with West Coast Cool | Registered: 20 June 2007Reply With Quote
one of us
posted Hide Post
Not my dreams-that rifle looks to factory-like to me.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
one of us
posted Hide Post
I'm into big bores. That is a very nice rifle.
 
Posts: 2209 | Location: Delaware | Registered: 20 December 2002Reply With Quote
one of us
posted Hide Post
I don't know what the aim of this company is,but if it's to produce many rifles and become big and rich then their rifles will reflect that.IMO,there is a factory approach to building a highend rifle.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
One of Us
posted Hide Post
Not my dreams-that rifle looks to factory-like to me. quote


Shootaway you seem to be the dumbest person on AR that would be a Westley Richards rifle hand built and probally 25,000 homer homer
 
Posts: 568 | Registered: 14 May 2009Reply With Quote
One of Us
posted Hide Post
he's from Montreal, probably thinking in metric...

Beautiful rifle, classic lines and flawless execution to these eyes. I would agree it might be a bit more of a "Hottie" in 404J, but a set might be even better. I could find room for this at my house.

Rich
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
Damn pretty, Mike! Gun porn!


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
one of us
Picture of Sevens
posted Hide Post
Does WR include a handkerchief to wipe up your tears when the rifle gets a scratch?

That's an awesome rifle!


____________________________

If you died tomorrow, what would you have done today ...

2018 Zimbabwe - Tuskless w/ Nengasha Safaris
2011 Mozambique - Buffalo w/ Mashambanzou Safaris
 
Posts: 2789 | Location: Dallas, TX | Registered: 27 January 2004Reply With Quote
one of us
posted Hide Post
A shootaway quote! My eyes! The pain! I'm tearing up as if CS gassed! I need a hanky too!

It's like he works hard at coming up with the stupidest thing to say about any topic!
This one gets a 5-DOH! rating from me.
homer homer homer homer homer
 
Posts: 28032 | Location: KY | Registered: 09 December 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by MJines:
. . . when I get around to building another custom it will be the identical twin to this rifle in .318 Westley Richards. The lines on this rifle are damn near perfect in my opinion. And yes I know it is not a big bore, but the folks on the big bore forum are the ones that can really appreciate a rifle of this style.



Mike,

Ever since I first saw this rifle, posted on AR a few years back, it has been a part of my dreams as well.

I have been attempting to have one built very similar to the lines of that rifle since 2006. Not much I would change but mine will be a 404 Jeffery.

Finally I believe I found a gun maker to produce it and hopefully I will have it in my hands by July 2010....and shortly thereafter taking it to Africa!

Best,

Jim
 
Posts: 1999 | Location: Memphis, TN | Registered: 23 April 2004Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
It is gorgeous, but I'm not a fan of the front sight. Call me un-couth but they look they are on backwards to me.



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
One of Us
posted Hide Post
I've been saving pictures of classics like this as reference material for my 404 project. This one will be added to the group. Very nice indeed.


NRA
CRPA
DRSS
 
Posts: 608 | Location: AZ/CA | Registered: 18 October 2006Reply With Quote
One of Us
Picture of jorge
posted Hide Post
quote:
Originally posted by jjs:
quote:
Originally posted by MJines:
. . . when I get around to building another custom it will be the identical twin to this rifle in .318 Westley Richards. The lines on this rifle are damn near perfect in my opinion. And yes I know it is not a big bore, but the folks on the big bore forum are the ones that can really appreciate a rifle of this style.



Mike,

Ever since I first saw this rifle, posted on AR a few years back, it has been a part of my dreams as well.

I have been attempting to have one built very similar to the lines of that rifle since 2006. Not much I would change but mine will be a 404 Jeffery.

Finally I believe I found a gun maker to produce it and hopefully I will have it in my hands by July 2010....and shortly thereafter taking it to Africa!

Best,

Jim


Who is building it for you Jim? jorge


USN (ret)
DRSS Verney-Carron 450NE
Cogswell & Harrison 375 Fl NE
Sabatti Big Five 375 FL Magnum NE
DSC Life Member
NRA Life Member

 
Posts: 7154 | Location: Orange Park, Florida. USA | Registered: 22 March 2001Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
That is gorgeous, I love that dark wood.....pure elegance

I personally may prefer a different sight, and maybe slide the bbl. band back a bit, but awesome rifle none the less.


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by jorge:
quote:
Originally posted by jjs:
quote:
Originally posted by MJines:
. . . when I get around to building another custom it will be the identical twin to this rifle in .318 Westley Richards. The lines on this rifle are damn near perfect in my opinion. And yes I know it is not a big bore, but the folks on the big bore forum are the ones that can really appreciate a rifle of this style.



Mike,

Ever since I first saw this rifle, posted on AR a few years back, it has been a part of my dreams as well.

I have been attempting to have one built very similar to the lines of that rifle since 2006. Not much I would change but mine will be a 404 Jeffery.

Finally I believe I found a gun maker to produce it and hopefully I will have it in my hands by July 2010....and shortly thereafter taking it to Africa!

Best,

Jim


Who is building it for you Jim? jorge


Hello Jorge:

I hope all is going well with you and your family. Ralph Martini is going to build the rifle....website

www.martiniandhagngunmakers.com
 
Posts: 1999 | Location: Memphis, TN | Registered: 23 April 2004Reply With Quote
One of Us
posted Hide Post
MJines, You may want to ask 577NitroExpress about his sons rifle http://forums.accuratereloadin...=706108626#706108626
That stock has cause many a heart to skip.
 
Posts: 1304 | Location: N.J | Registered: 16 October 2004Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
I checked the link, looks like its gonna be (or is) a smokin nice rifle.........but wonder where the updated pics are?


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
One of Us
Picture of 333_OKH
posted Hide Post
shoot me now, but those front sights look like a drunk gunsmith put them on backwards. that said, that was a rifle used as a pattern for my custom....only different front sight.
 
Posts: 3284 | Location: Mountains of Northern California | Registered: 22 November 2005Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
It is HIS dream rifle...
Just needs a kevlar stock in stainless with hi viz front sight with a peep rear Big Grin


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27633 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
One of Us
Picture of Bent Fossdal
posted Hide Post
It is as good as it gets, but look long and hard on the plazement of the scope before you copy that...
Unless you are shaped very strange, that scope need to come at least one inch foreward, or you need stocks in the bandaid-industry.


Bent Fossdal
Reiso
5685 Uggdal
Norway

 
Posts: 1707 | Location: Norway | Registered: 21 April 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Bent Fossdal:
It is as good as it gets, but look long and hard on the plazement of the scope before you copy that...
Unless you are shaped very strange, that scope need to come at least one inch foreward, or you need stocks in the bandaid-industry.
I think it looks just about right-that is 13 inches from the end of the buttstock for a large caliber,non bigbore.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
<Mike McGuire>
posted
quote:
Originally posted by Bent Fossdal:
It is as good as it gets, but look long and hard on the plazement of the scope before you copy that...
Unless you are shaped very strange, that scope need to come at least one inch foreward, or you need stocks in the bandaid-industry.


And distance between centre of butt and bore is about like Wby.
Smiler

Nothing suprising there as all Roy did was take the old English guns and add a cheek piece. Some of the H&H stuff has the centre of the butt even further below the bore.

But if you engrave H&H on the barrel the stock design will have no recoil problems but if Weatherby is on the action it changes all.
Big Grin
 
Reply With Quote
one of us
posted Hide Post
I like the scope up almost flush with the cocking piece when cocked. That one is definitely too far back for me. Must not be a Leupold.
 
Posts: 3174 | Location: Warren, PA | Registered: 08 August 2002Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by Mikelravy:
I like the scope up almost flush with the cocking piece when cocked. That one is definitely too far back for me. Must not be a Leupold.

Yes, its a Schmidt&Bender and is a little to close for comfort (about 1" to far back for an average person), unless you have big shoulders and a thick coat on.
Most available mounts would allow the scope to be moved forward anyway.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
one of us
Picture of Fjold
posted Hide Post
The crank's on the wrong side but other than that it looks like it would do.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12871 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
quote:
Originally posted by jjs:
quote:
Originally posted by jorge:
quote:
Originally posted by jjs:
quote:
Originally posted by MJines:
. . . when I get around to building another custom it will be the identical twin to this rifle in .318 Westley Richards. The lines on this rifle are damn near perfect in my opinion. And yes I know it is not a big bore, but the folks on the big bore forum are the ones that can really appreciate a rifle of this style.



Mike,

Ever since I first saw this rifle, posted on AR a few years back, it has been a part of my dreams as well.

I have been attempting to have one built very similar to the lines of that rifle since 2006. Not much I would change but mine will be a 404 Jeffery.

Finally I believe I found a gun maker to produce it and hopefully I will have it in my hands by July 2010....and shortly thereafter taking it to Africa!

Best,

Jim


Who is building it for you Jim? jorge


Hello Jorge:

I hope all is going well with you and your family. Ralph Martini is going to build the rifle....website

www.martiniandhagngunmakers.com


Cool. Let me know when they are working on it. Smiler I can check on progress for you and try not to drool on it. Their shop is just down the road from me. thumb



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
One of Us
posted Hide Post
I,ll take one in 9.3X62 and a twin in 416 rigby. and I supose Since I am fantisizing , how about a little .257 roberts or 7X57.
I can't improve much on that.
I really would prefer a simple single flip up rear sight. The extra leavs look good though, But a agree with Jon Taylor.
They serv no purpose. ...tj3006


freedom1st
 
Posts: 2450 | Registered: 09 June 2005Reply With Quote
one of us
Picture of 300H&H
posted Hide Post
I've always considered the lines of those rifles to be graceful, but the second you try to sight down one with a scope, all is lost...

In my view, it's an open sight stock design. The best counter-measure I saw was a pop-up cheekpiece on a schoenauer rife... It was on sale at gunbroker, I eyed it for awhile, and I believe a fellow forum member picked it up for a good price... now I have non-buyer's remorse!

I love open sights though. Maybe that comes from impractically placing target scopes on high power rifles. Shoot once, pick up lens from glasses, replace and fire again...
 
Posts: 673 | Location: St. Paul MN | Registered: 21 April 2001Reply With Quote
one of us
Picture of 300H&H
posted Hide Post
PS: I love the front sight! Impractical? Yes! I don't get big beads on front sights... Close range? Night sight? "Okay, I wounded a griz or cape buff, remove scope and proceed into the brush..."
--- WHO does that?!

I hate the look of a rifle w/out open sights, but loathe the wood stocked-classic, pseudo-tactical nature of adding them when you have a perfectly capable schmidt & bender.

That said, every rifle should have open sights. It's like pants. I need them, they probably wouldn't hurt in a job interview, but my work speaks for itself...

and no I'm not an engineer.
 
Posts: 673 | Location: St. Paul MN | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
I agree clap I would love to have that beauty next to the .500 & 404 jeffery in the safe what an armoury BOOM
 
Posts: 896 | Location: Langwarrin,Australia | Registered: 06 September 2007Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    The Stuff That Dreams Are Made Of

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia