The Accurate Reloading Forums
Where is the 375 Alaskan??

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/882100666

30 April 2007, 08:15
MopaneMike
Where is the 375 Alaskan??
Ya!... Where is Ruger's new brother to the African??


MopaneMike
30 April 2007, 08:21
RIP
Here we go again. Wink
30 April 2007, 08:25
boom stick
ahhh,,,another fellow aztlaner...

i too would like to see them...

it could be a 911 conspiracy thing...

they are probably perfecting the coating or the stock


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
30 April 2007, 19:18
LJS
My dealer's Ruger distributor has lots of them. They are out of the African model, however. If your dealer calls Ruger, they will tell him which distributor to contact. I did that and got the #1 9.3x74 I wanted.
30 April 2007, 20:47
grizzinater
i am so glad to see that they are just doing a matte stainless finish also and cant wait to see them when they come out
30 April 2007, 21:37
boom stick
p.s. the 375 alaskan is a 348 win case necked to 375...i dont mean to be the nomenclature police but hey...


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
01 May 2007, 01:12
MopaneMike
quote:
Originally posted by boom stick:
p.s. the 375 alaskan is a 348 win case necked to 375...i dont mean to be the nomenclature police but hey...


Hey Wait a minute!!..... I'm confused, I was under the impression it was 375 Ruger caliber?? Don't be messing with my head like this!..


MopaneMike
01 May 2007, 06:50
jeffeosso
ruger m77 hawkeye african and alaskan are rifles

375 alaskan is a 348 winchester, a little improved, to .375

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
01 May 2007, 10:48
MopaneMike
quote:
Originally posted by jeffeosso:
ruger m77 hawkeye african and alaskan are rifles

375 alaskan is a 348 winchester, a little improved, to .375

jeffe


Doh!! Ya-Got me......

My Bad...

Where is the "375 Ruger Alaskan Model"????

There is that better?? Wink


MopaneMike
02 May 2007, 10:24
Moose-Hunter
The Ruger Hawkeye 375 Alaskan's are selling up here, and fast. At the local gun shops around me, the rifles last less than a day in the store before they're sold.

I was visiting one store today and four different people came in asking about them. All four of them paid in advance for one without even getting the chance to look one over and handle it.

I'll wait until the 'storm' passes before I take a crack at one. I'm going to buy dies and brass before I get the rifle, anyways.
02 May 2007, 10:29
.366torque
Not sure if it's the Alaskan model but Phil Shoemaker apparently has one.
quote:
I certainly plan on duplicating their 375 H&H load with the 350 Woodleigh bullet at 2300 fps in the new Ruger 375 for my use during this next bear season.
Phil Shoemaker

02 May 2007, 12:11
458Win
As of today I have two of them. An African and an Alaskan and I plan on hunting with them starting next week.
Chimo guns is Wasilla has sold both the Alaskan and African models.
I fired the new Hornady steel jacket 300 gr solids last week in the 20 inch bbl Alaskan and they averaged 2527fps 25 feet from the muzzle.
Both rifles are the slickest feeding factory rifles I have ever seen and are better than a lot of expensive custom guns.


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
02 May 2007, 19:11
Low Wall
quote:
Originally posted by 458Win:
As of today I have two of them. An African and an Alaskan and I plan on hunting with them starting next week.
Chimo guns is Wasilla has sold both the Alaskan and African models.
I fired the new Hornady steel jacket 300 gr solids last week in the 20 inch bbl Alaskan and they averaged 2527fps 25 feet from the muzzle.
Both rifles are the slickest feeding factory rifles I have ever seen and are better than a lot of expensive custom guns.

I keep telling myself I don't "need" one of these rifles!...and I don't!...





02 May 2007, 20:05
grizzinater
hey 458 is your alaskan the diamondblack finish or the matte stainless
02 May 2007, 21:12
458Win
The one I have is the diamondback and I am told that is the way they are planning to offer them.


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
02 May 2007, 21:59
grizzinater
according to the ruger website they are going to offer the matte stainless also, is yours all stainless with the coating or is it chromoly with the coating.
06 May 2007, 07:44
myoderru03
The Ruger web-site now shows the stainless version of the Alaskan in addition to the diamond-back version. Unless I've been had, I just bought one of the stainless "Alaskan" versions on gunbroker.com. Talk about sheer dumb luck! I will obviously post updates when it arrives (and keep my fingers crossed in the meantime).

FYI, Natchez shooting supply, www.natchezss.com, has 375 Ruger dies, brass, and ammo in case anyone is in need.
06 May 2007, 10:33
sierrabravo45
I have handled it.

It feels like at gun that is wrapped in a Rubbermade condom.

I don't know where I came up with that analogy but it is 11:33 at night and I have been drinking.


Mink and Wall Tents don't go together. Especially when you are sleeping in the Wall Tent.
DRSS .470 & .500



06 May 2007, 23:20
p dog shooter
When it as been raining for days and the salt spray as been coming into the boat ect. A rubber maid condom might not be so bad. Big Grin
07 May 2007, 05:57
gumboot458
......Thats a fine new name for a rifle,, and not a bad idea either......I was in Boondocks looking for one ,,, should have swung into Chimo,s instead.....


.If it can,t be grown , its gotta be mined ....