Go | New | Find | Notify | Tools | Reply |
One of Us |
I need some contacts that make bullet molds for .577 BPE paper patch. All help and info is much appreciated. Thanks | ||
|
Moderator |
the .577 bpe is acually a .577 bullet, not a .585, as I found out, in opposite, when I was working with richard's 577 NE. www.neihandtools.com makes them jeffe #dumptrump opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
Jeff maybe its the individual rifle but my rifle has very good bores and the groove measurement is .598" I think that the really old ones were all made to the individual maker's desires. | |||
|
one of us |
Also try these guys: http://www.mountainmolds.com/ LIFE IS NOT A SPECTATOR'S SPORT! | |||
|
One of Us |
Thanks Fred but his website says he isn't making molds until he gets his shop built and he has no idea when that will be. | |||
|
one of us |
I would check with, NEI or LBT. Keith IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!! ------------------------------------ We Band of Bubbas & STC Hunting Club, The Whomper Club | |||
|
Moderator |
.798? my goodness, wouldn't a .577 or even .620 bullet just rattle around in there? #dumptrump opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
.798 doesn't sound right, sounds more like a 10ga than a .577 bpe. Was that a mistype of .5798? Also check Dixie gun works, sometimes they have off the wall molds for rifles as such. "Molotov Cocktails don't leave fingerprints" -Dr. Ski | |||
|
One of Us |
I mistyped. It should be .598 | |||
|
Moderator |
oh.. wasn't picking on you for your typing... lord knows *I* would be the last one in line for that!! jeffe #dumptrump opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
one of us |
Randy Brooks made mine. You need to specify weight, dimensions and shape. Cast to bore diameter, patch to groove diameter. Dave | |||
|
One of Us |
Dave do you have any contact info on Randy? Thanks | |||
|
One of Us |
| |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia