The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Big Bores 416 458 470 A.R. case drawingsGo | New | Find | Notify | Tools | Reply | |
Moderator |
 opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | ||
|
One of Us |
are you a proud parent  looks great  jeff...get back to me when you can 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
| Moderator |
crap!! i have the taper too steep.. the .550 is about .2 up from the base... manson and I will work it out tomorrow jeffe opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
Moderator |
Jeff, Looking good! So are the throats 0.001" over bullet dia w/ 1 1/2 deg taper? __________________________________________________ The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time. | |||
|
one of us |
Okay, ya'all be patient with me for a minute as I haven't been following all the various threads completely. The 416AR has my attention. Let me see if I got this figured out... 1). It's made from RUM brass (shortened) 2). We're talking a bit more capacity/horsepower than a 416 Taylor...ballistics ~comparable to a 416 Rem Mag 3). This all fits into a standard length M98 without modification except for opening up the bolt face, maybe a tad of rail massaging. 4) Dies are available for less than a rectal tonsilectomy 5). I can send one of you my action and for an appropriate price you will send me back a so barreled action. Am I tracking so far? | |||
|
| One of Us |
that 416 looks sweet! cant wait for the tests 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
| Moderator |
opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
how fast will the 30 cal 220 gr nosler partition go do ya think? 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
one of us |
Nice work, guys.  Does the OCL ( overall cartridge length ) fall within the parameters of most of the actions mentioned in the other threads? Is there, or could we compile, a list of the actions and the acceptable OCL of each? Since 3 different bullet diameters are being discussed in this thread, I'm wondering how the OCL will be affected by the different projectile weights and profiles. ____________________________________________ Did I mention, "I REALLY LIKE GUNS"? "...I don't care what you decide or how much you pay for it..." Former FFL Dealer NAHC Life Member NRA Endowment/Life Member Remington Society of America Member Hunter in Training | |||
|
| One of Us |
buy a 7mag or 300 mag and send it in whichever is cheapest 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
one of us |
Hi Jeff, I sure like the look of the 416. I have a Taylor but with the extra case capacity of the AR416 it may just make it that little bit better. My Taylor is loaded with 350 Swift A-Frames at 2520 fps but an increase to 2600 would be nice. Lets see how it all work out. Take good care, Dave | |||
|
one of us |
I like the 470. But I do have a 458 win already. That 458 AR would rechamber nicely in a 458 win wouldn't it? -------------------- THANOS WAS RIGHT! | |||
|
one of us |
470 Mbogo, I'm with you bud... I can envision having my Taylor redone into the 416AR. Will the reamer clean up a Taylor chamber, so we can use the same .416 barrel? Brian | |||
|
| Moderator |
Busmaster, the 7rem, 300 win, 338, 458 win all load to 3.34 factory (well, perhaps the 7 doesn't load that deep, but it DOES have the same magizine).. so 3.35 should be a walk in the park.. the one gun i would be worried about is the browning abolt with a magizine.. they tend to be a little length critical. Will it clean up a 416 taylor or 458 win... or even a 375 taylor?  Yes, fellas, it certainly will .. In fact, I think this is a great "answer" for the cheap adams and bennet "question"... By reamer specs, it will 100% recut the chamber, and create a new throat. jeffe opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Big Bores 416 458 470 A.R. case drawings
Visit our on-line store for AR Memorabilia