The Accurate Reloading Forums
Is my 400PDK big enough for Cape Buf?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/4771001231

05 May 2010, 09:36
ramrod340
Is my 400PDK big enough for Cape Buf?
Well as a thank you for some work I did for his daughter here in the states the gentleman that I hunted with in Namibia has asked me back to spend some time looking for a larger Kudu and to take a Cape Buffalo.

I have been keeping him informed about my 400PDK. He liked the 280 version I had used in 2007. He said it was plenty big and I didn't need to worry about head stamp.

The 400PDK allows me to load 5 in my MKX. Current testing with Hornady 400gr DGX allow me a comfortable no pressure issue very accurate 2250ffps. Is this enough power for a buffalo?? As you can tell I'm out of my element here.

If this will work what bullet(s) would you suggest? The bore is .411. I've shot a couple hogs with the DGX but have no recoveries only pass through. Actually one passed through 2 200# hogs.


As usual just my $.02
Paul K
05 May 2010, 09:51
Bwanna
I'm no expert but I think that rig would be plenty for black death. In fact, you'll be producing velocities and energy similar to a 450-400. Plenty of buff have been taken with that rifle.

If the DGX is shooting well, that's the one I would use. I have no experience with the DGX, having shot one buff with the older Hornady soft. That bullet disinegrated but still put the buff down in 80 yards with no follow necessary.

As always, bullet placement is key.


http://huntoholic.blogspot.com/
05 May 2010, 09:58
boom stick
Just don't tell the Buff it was not a 450/400 and the bullets wont bounce off Wink


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
05 May 2010, 16:09
jeffeosso
yes, if you like, it certinly is


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
05 May 2010, 21:28
ramrod340
OK since I'm 200fps over Hornady Factory 450/400s I believe I've got my mind around my 06 based case getting enough velocity. Any 450/400 shooters have comments as to bullets?

Key issue now is getting this piece of Bastogne finished. Would hate to take a trip to Namibia and risk taking pictures of the rifle in its Hogue stock. Big Grin



As usual just my $.02
Paul K
06 May 2010, 06:57
Snellstrom
You'll never finish that stock in time so you better just send it to me so I can put my .400 project in it.
Roll Eyes
06 May 2010, 07:09
ramrod340
quote:
my .400 project in it.

So what 400 did you decide on?


As usual just my $.02
Paul K
07 May 2010, 08:13
Snellstrom
I'm still on the fence!
A 400 Whelen barrel stamp is very appealing but the added performance of your chambering is almost too good to ignore.
Whats a guy to do?
08 May 2010, 00:39
Dutch44
Woodleigh's, Swifts, North Fork's and, if they make one, Trophy bondeds. All should serve you well.


Dutch
08 May 2010, 02:21
465H&H
If it ain't big enough, lok for a smaller buff!!! It is more rhan enough for any byff out there.

465H&H