THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Targets from the Big Bore shoot

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Targets from the Big Bore shoot Login/Join
 
One of Us
posted
Did they ever get scanned? (Do we have permission to have them scanned?) If we have permission, and they haven't been scanned yet, I will be able to have it done in a couple weeks, when I return to SC. (I'm still in Houston for a couple days, and will be coming back through on my way to SC, if it's easier for me to pick some up, than mail them to me.)


And for the support of this Declaration, with a firm reliance on the protection of divine Providence, we mutually pledge to each other our Lives, our Fortunes and our sacred Honor.
 
Posts: 863 | Location: Texas | Registered: 25 January 2006Reply With Quote
One of Us
posted Hide Post
Aglifter,

I got the Buffalo target scanned the day after the shoot. I sent Rusty a PM and never heard back. If you will PM me your e-mail I will send you the file.
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
I have quote a few of those left... Can i send them back?


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40092 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
Quite a few of what Jeff?
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
Jtex,
My fault for not getting back to you. I don't see any reason not to use them.

Can you send them to me on a disk?

Once again, my apoligies for not getting back to you.


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
one of us
posted Hide Post
I'd love to get the print file too if that is possible and reasonable.

Thank you!


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
 
Posts: 6199 | Location: Charleston, WV | Registered: 31 August 2002Reply With Quote
One of Us
Picture of ptaylor
posted Hide Post
quote:
Originally posted by mstarling:
I'd love to get the print file too if that is possible and reasonable.

Thank you!


Same here.
 
Posts: 328 | Location: central TX | Registered: 06 December 2005Reply With Quote
One of Us
posted Hide Post
Guys,

This damn thing is giving me fits! The file size is pretty big 10,715,090 bytes! And I can't seem to e-mail it.

Do any of you have any ideas how I could shrink it to a sendable size. It is in a PDF format.

If I could send it in an e-mail format I would be happy to send it to anyone ( scanning it in color was kinda expensive ) black and white was a piece of cake.
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
Moderator
posted Hide Post
JTEX,

I'm going to send you a PM in a couple of minutes.

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
One of Us
posted Hide Post
Guys,

George has worked out a way for me to put them on the net so you can down load them when he confirms this works I will let you know.
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
One of Us
posted Hide Post
Guys,

I think I have it now, with a lot of help from GeorgeS.


http://www.mediafire.com/?vcx0njbpim1

I think this should work. Click on the link, down load the file send it to KINKO's or someone and let them print it.
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
one of us
posted Hide Post
Thank You!


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
 
Posts: 6199 | Location: Charleston, WV | Registered: 31 August 2002Reply With Quote
One of Us
posted Hide Post
Thank you and GeorgeS.

Rich
DRSS
Knowledge not shared is knowledge lost...
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
Moderator
posted Hide Post
I'm happy to help out. thumb

I'm going to run one off on our plotter to see how it comes out.

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
One of Us
posted Hide Post
You are all more than welcome, I hope you enjoy!

Don't forget Rusty he gave me the original to scan.

If any of you have other big game targets, leopard, lion or sideon buffalo I would love to have a copy of those.
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
Will the leopard be walking backwards again??? lol rotflmo


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27615 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
One of Us
posted Hide Post
Boomie,

If someone will send me a copy of the Leopard target to scan I promise I will flip it so it won't be backing up next year clap
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
One of Us
posted Hide Post
you mean "moonwalking" don't you?

Rich
DRSS
Knowledge not shared is knowledge lost...
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
posted Hide Post
Rich,

I think it was just trying to escape getting ventilated by your bazooka rotflmo
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
Hmm...I can't figure out how to get the file to download! It starts, then stops after about 12kb.

Anyone else having problems?



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
One of Us
Picture of keithv35
posted Hide Post
I couldn't open it directly, but I was able to right click, save it, and then open it.

Looks great, now I need a bigger printer!

Keith
 
Posts: 350 | Location: Henderson, NV | Registered: 24 July 2004Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
quote:
Originally posted by keithv35:
I couldn't open it directly, but I was able to right click, save it, and then open it.

Looks great, now I need a bigger printer!

Keith


That worked for me to...thanks.

Fortunately I have access to a plotter. Big Grin

Cheers,
Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Targets from the Big Bore shoot

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia