THE ACCURATERELOADING.COM SPORTERIZED MILITARY RIFLE FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
What to do with
 Login/Join
 
One of Us
posted
I have a m17 in 30/06 and a P14 in 303 epps both in synthetic stocks both with worn barrels .any suggestions on what to turn them into next.My youngest boy is a tad recoil wary 6'2" and about 100lb wringing wet but needs a gun with some thump for hunting sambar come folks give me some ideas please.
 
Posts: 157 | Location: N.E. Victoria Australia | Registered: 19 March 2007Reply With Quote
one of us
posted Hide Post
Whelen, 338/06, and 9.3x62 come to mind and should be easy to do.
 
Posts: 1233 | Location: Lexington, Kentucky, USA | Registered: 04 February 2003Reply With Quote
One of Us
posted Hide Post
Thanks for the suggestions my eldest boy has a beautiful 35 whelen built on a p14 action though you wouldnt think it if you saw it.looks more like an early winchester.will get the young bloke to try it see if he can handle it,originaly had a 338 fed made for him but liked it to much myself..lol..Was also thinking a 358 norma or 416 taylor for myself
 
Posts: 157 | Location: N.E. Victoria Australia | Registered: 19 March 2007Reply With Quote
One of Us
Picture of mad_jack02
posted Hide Post
Take the P14 and re barrel it to a 416 Taylor. And on the 1917 maybe a 375 Whelen IMP?


Extreme Custom Gunsmithing LLC, ecg@wheatstate.com
 
Posts: 487 | Location: Wichita, ks. | Registered: 28 January 2007Reply With Quote
one of us
Picture of PaulH
posted Hide Post
quote:
P14 in 303 epps

30-40 Improved
 
Posts: 218 | Location: Liquid Sunshine State | Registered: 12 November 2003Reply With Quote
One of Us
posted Hide Post
Why not do another 303Epps?
 
Posts: 743 | Location: Las Vegas | Registered: 23 June 2009Reply With Quote
One of Us
posted Hide Post
well i have another 303 epps so was thinking on something new to play with,also thinking of doing a 303/35 epps on a smle#4 for hunting over the hounds in the thick stuff,getting 30/40 brass over here is near impossible and dont see it being much different than the 303 epps.
 
Posts: 157 | Location: N.E. Victoria Australia | Registered: 19 March 2007Reply With Quote
One of Us
posted Hide Post
looks like the 3006 is about to become a 338/06 .thanks for the suggestions
 
Posts: 157 | Location: N.E. Victoria Australia | Registered: 19 March 2007Reply With Quote
One of Us
posted Hide Post
I know there was a 35 Epps, I'm guessing there was a 338 Epps.
I think a rebore will fix you right up.

Cheers, John


Give me COFFEE and nobody gets hurt
 
Posts: 1608 | Location: San Antonio, Texas | Registered: 04 January 2010Reply With Quote
One of Us
posted Hide Post
unfortunately getting barrels rebored at a reasonable price is very hard here in Oz,unless any body out there knows different
 
Posts: 157 | Location: N.E. Victoria Australia | Registered: 19 March 2007Reply With Quote
One of Us
Picture of 45otto
posted Hide Post
p14 to a 300wm. you can take a mag box from a 1917 and fit it in the stock. rebarrel the 06 into a .25-06 that will reduce recoil a bit.


______________________


Are you gonna pull those pistols or whistle Dixie?
 
Posts: 439 | Location: Rosemount, MN | Registered: 07 October 2005Reply With Quote
One of Us
posted Hide Post
already got a 300wm ,25-06 illegal to use on sambar deer got to be 270 with minium bullet weight of 130grns or bigger
 
Posts: 157 | Location: N.E. Victoria Australia | Registered: 19 March 2007Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
p14 back to 303 original, M17 to 7x74, 30-06, or 35 whelen..

303, loaded with barnes or taipan bullets, good moderate loads, should swat em good.

don't even whisper my name in the swamps.. that how we got desert loving hogs...


#dumptrump

opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 38498 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
I have a Winchester P14 action that I want to re-barrel/chamber in the original 303 British but cannot find a 303 barrel...old take-off or new. Any suggestions?
 
Posts: 490 | Registered: 15 March 2004Reply With Quote
One of Us
Picture of bartsche
posted Hide Post
Roll EyesA new 30-06 barrel on the 1917 and a 350 REM. on the 1914.
ConfusedIt is hard for me to believe that a lad 6'2' can only weigh 100 pounds beerroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
 
Posts: 10226 | Location: Temple City CA | Registered: 29 April 2003Reply With Quote
One of Us
posted Hide Post
boys as skinny as a rake,bit like me many years ago,bloody well sure that will change soon enough (did for me.lol.)soon as he catches 1 of those little fillies he is so keen on chasing.
 
Posts: 157 | Location: N.E. Victoria Australia | Registered: 19 March 2007Reply With Quote
One of Us
posted Hide Post
When I graduated high school I was 6' 1" and 125 pounds. I empathize with him!

I recently bought a 7x64 and love it. Recoil is firm but not bad. A long push more than anything.

9.3x62 of course is a classic.

Jon, there are .303 barrels out there, I do not know where you are, but your best bet is probably to have a custom contour done.


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.
 
Posts: 1480 | Location: Ohio | Registered: 06 June 2010Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia