The Accurate Reloading Forums
What to do with

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3281019521/m/9221018761

07 December 2011, 04:10
sambar02
What to do with
I have a m17 in 30/06 and a P14 in 303 epps both in synthetic stocks both with worn barrels .any suggestions on what to turn them into next.My youngest boy is a tad recoil wary 6'2" and about 100lb wringing wet but needs a gun with some thump for hunting sambar come folks give me some ideas please.
07 December 2011, 09:16
Art S.
Whelen, 338/06, and 9.3x62 come to mind and should be easy to do.
07 December 2011, 15:10
sambar02
Thanks for the suggestions my eldest boy has a beautiful 35 whelen built on a p14 action though you wouldnt think it if you saw it.looks more like an early winchester.will get the young bloke to try it see if he can handle it,originaly had a 338 fed made for him but liked it to much myself..lol..Was also thinking a 358 norma or 416 taylor for myself
12 December 2011, 18:31
mad_jack02
Take the P14 and re barrel it to a 416 Taylor. And on the 1917 maybe a 375 Whelen IMP?


Extreme Custom Gunsmithing LLC, ecg@wheatstate.com
13 December 2011, 15:40
PaulH
quote:
P14 in 303 epps

30-40 Improved


https://sites.google.com/site/8mmmauserreloading/home
14 December 2011, 01:33
Palladin8
Why not do another 303Epps?
16 December 2011, 02:55
sambar02
well i have another 303 epps so was thinking on something new to play with,also thinking of doing a 303/35 epps on a smle#4 for hunting over the hounds in the thick stuff,getting 30/40 brass over here is near impossible and dont see it being much different than the 303 epps.
21 December 2011, 16:26
sambar02
looks like the 3006 is about to become a 338/06 .thanks for the suggestions
22 December 2011, 01:52
Phatman
I know there was a 35 Epps, I'm guessing there was a 338 Epps.
I think a rebore will fix you right up.

Cheers, John


Give me COFFEE and nobody gets hurt
22 December 2011, 06:16
sambar02
unfortunately getting barrels rebored at a reasonable price is very hard here in Oz,unless any body out there knows different
24 December 2011, 09:39
45otto
p14 to a 300wm. you can take a mag box from a 1917 and fit it in the stock. rebarrel the 06 into a .25-06 that will reduce recoil a bit.


______________________


Are you gonna pull those pistols or whistle Dixie?
25 December 2011, 11:44
sambar02
already got a 300wm ,25-06 illegal to use on sambar deer got to be 270 with minium bullet weight of 130grns or bigger
27 December 2011, 04:01
jeffeosso
p14 back to 303 original, M17 to 7x74, 30-06, or 35 whelen..

303, loaded with barnes or taipan bullets, good moderate loads, should swat em good.

don't even whisper my name in the swamps.. that how we got desert loving hogs...


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
15 January 2012, 10:04
Jon
I have a Winchester P14 action that I want to re-barrel/chamber in the original 303 British but cannot find a 303 barrel...old take-off or new. Any suggestions?
15 January 2012, 21:34
bartsche
Roll EyesA new 30-06 barrel on the 1917 and a 350 REM. on the 1914.
ConfusedIt is hard for me to believe that a lad 6'2' can only weigh 100 pounds beerroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
16 January 2012, 06:35
sambar02
boys as skinny as a rake,bit like me many years ago,bloody well sure that will change soon enough (did for me.lol.)soon as he catches 1 of those little fillies he is so keen on chasing.
06 February 2012, 05:22
Fal Grunt
When I graduated high school I was 6' 1" and 125 pounds. I empathize with him!

I recently bought a 7x64 and love it. Recoil is firm but not bad. A long push more than anything.

9.3x62 of course is a classic.

Jon, there are .303 barrels out there, I do not know where you are, but your best bet is probably to have a custom contour done.


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.