THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Idaho Sharpshooter, the 9.3x64 testing will be put off for a while. (photo added)

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Idaho Sharpshooter, the 9.3x64 testing will be put off for a while. (photo added)
 Login/Join
 
One of Us
posted
While at the range today I slipped on some ice and shattered my stock and scope. Aparently they don't hold up so well if you fall on them! thumbdown
I 'll post photos as soon as I can get my hands on a camera. Both of mine are with my wife, she's visiting her family.
Damn what a way to end the year!!!!!!!!!!!!
On the up stroke my 300 WSM is shooting quite well with the new loads.
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
Picture of bartsche
posted Hide Post
beerI hope that your new year proves to be better. cheers roger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
 
Posts: 10226 | Location: Temple City CA | Registered: 29 April 2003Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
Sorry to hear that. That really sucks!



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
posted Hide Post
Here's the carnage!
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
i wanna cry!!

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40092 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
@#$%#$&*!!!!!!!!!

sorry man... Frowner


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27616 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
Picture of GoWyo
posted Hide Post
Ouch!

Umm, how far did you fall before landing? Were you ice climbing? First, glad you weren't hurt, second, that leupold is an obvious manufacturing defect, nudge, nudge, wink, wink. Naw, I'm sure they will be good on repair costs. Now, take that sawdust stock and warm yourself a nice totty and enjoy watching it burn in the fireplace. OR make a spotting scope stock out of the remnants. Order a high grade replacement and enjoy it.

I remember falling on my Savage/Valmet 330 on it's first day out. Snapped the pistol grip right off the receiver. Broke my 14 year old heart. It's still epoxied together and shooting 30 years later.

I think I'll call your stock the humpty dumpty stock as epoxy may be a far stretch. Was it a 550 FS?
Gary


Damn right its loaded, it makes a lousy club. -JW
 
Posts: 404 | Location: Central Highlands of Wyoming | Registered: 02 January 2004Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by GoWyo:
Ouch!

Umm, how far did you fall before landing? Were you ice climbing? First, glad you weren't hurt, second, that leupold is an obvious manufacturing defect, nudge, nudge, wink, wink. Naw, I'm sure they will be good on repair costs. Now, take that sawdust stock and warm yourself a nice totty and enjoy watching it burn in the fireplace. OR make a spotting scope stock out of the remnants. Order a high grade replacement and enjoy it.

I remember falling on my Savage/Valmet 330 on it's first day out. Snapped the pistol grip right off the receiver. Broke my 14 year old heart. It's still epoxied together and shooting 30 years later.

I think I'll call your stock the humpty dumpty stock as epoxy may be a far stretch. Was it a 550 FS?
Gary


Witnesses say I was fully off the ground and somewhat horizontal, with my heels landing first then the rifle and me on top of the rifle (actually my shoulder and elbow).

It's a Brno ZKK 600 ( now called a CZ550 medium I believe). Not a full stock.
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
posted Hide Post
this one of those "tweener" things...hurts too much to laugh, and you're too big to cry...

Gosh, that is sad. Time for some good Walnut to come into your life.

regards,

Rich
NRA Life Member
DRSS
CZ shooter
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Idaho Sharpshooter:
Time for some good Walnut to come into your life.

regards,

Rich
NRA Life Member
DRSS
CZ shooter


True, but the Leupold was a bitter pill to swallow! Poor little bastard never even got to see a target! CRYBABY
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
quote:
the Leupold was a bitter pill to swallow!


Lifetime warranty = priceless. Smiler In the past I would bet dollars to donuts they'd fix it for you for the price of postage. I am not sure if they are still as generous, but you'd be remiss not to try!!

Cheers,
Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Canuck:
Lifetime warranty = priceless. Smiler In the past I would bet dollars to donuts they'd fix it for you for the price of postage. I am not sure if they are still as generous, but you'd be remiss not to try!!

Cheers,
Canuck


quote:
First, glad you weren't hurt, second, that leupold is an obvious manufacturing defect, nudge, nudge, wink, wink. Naw, I'm sure they will be good on repair costs.


Hmm, sounds like an idea. I could never lie though, I'm cursed with one of those conscience thingys! I see there's a product service in Alberta, I'll phone them tomorrow.
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
one of us
posted Hide Post
No worries,
Just send it to them and tell them what happened. They'll fix it. At least they have done so for me in the past.


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
one of us
Picture of TC1
posted Hide Post
Last time I bent a tube on a leupy I got a bill for $150. Still cheaper than a new scope Wink

Said to hear about the rifle.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
one of us
posted Hide Post
366 I am truely sorry to hear of your trouble. However my Grandfather had a saying when the going got tough. He would say " Its never so bad it couldn't be worse." The scope and stock are a write off BUT they can be replaced. The important thing is you were not hurt. I have a friend who was tightening up a loose bolt on his kids swing set. Somehow he managed to fall off a break his foot and ankle in several spots. He managed to do this one week before we were schded to leave for Montana on an elk and mule deer hunt. That really sucked! His foot and ankle have never been the same
 
Posts: 2443 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
one of us
posted Hide Post
Had the stock been a McMillan ... BTW, is the barrel O.K., or will the rifle shoot around corners now?
 
Posts: 28032 | Location: KY | Registered: 09 December 2001Reply With Quote
One of Us
posted Hide Post
The barrel is fine. I'll do some thinking on the stock replacement.
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
Picture of Clayman
posted Hide Post
quote:
Originally posted by Idaho Sharpshooter:
this one of those "tweener" things...hurts too much to laugh, and you're too big to cry...


Big Grin Hopefully, the new year treats you a little better.


_____________________________________________________
No safe queens!
 
Posts: 1225 | Location: Gilbertsville, PA | Registered: 08 December 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by .366torque:
While at the range today I slipped on some ice and shattered my stock and scope. Aparently they don't hold up so well if you fall on them! thumbdown
I 'll post photos as soon as I can get my hands on a camera. Both of mine are with my wife, she's visiting her family.
Damn what a way to end the year!!!!!!!!!!!!
On the up stroke my 300 WSM is shooting quite well with the new loads.


Sorry about the stock and scope. Could you post the loads for your 300wsm as I just got my new one and hope to start load testing soon?
 
Posts: 595 | Location: camdenton mo | Registered: 16 October 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by army aviator:
Sorry about the stock and scope. Could you post the loads for your 300wsm as I just got my new one and hope to start load testing soon?


You have a PM
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
Picture of Heat
posted Hide Post
Oh man 366 really sorry for that... Lucky with that kind of impact that you didn't hurt yourself...


"The trouble with our liberal friends is not that they are ignorant, but that they know so much that isn't so. " - Ronald Reagan
 
Posts: 5386 | Location: Phoenix Arizona | Registered: 16 May 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Heat:
Oh man 366 really sorry for that... Lucky with that kind of impact that you didn't hurt yourself...


Truth be told, I feel it today.
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
Picture of Snellstrom
posted Hide Post
Sorry to hear of your misfortune and am glad you are O.K. with nothing but your pride aching (well maybe your backside too).
I'm 100% sure that Leupold will repair or replace the scope. 2 years ago I did something reeaally stupid and broke my 3-9 vari-X II. It was my fault absolutely and I fessed up to it and sent it to them expecting to pay, they said the scope was not repairable and sent me a new one at NO CHARGE!
If I was you I'd do the same thing and tell it like it was and I know they will treat you right, they are fantastic!
Sorry there isn't a quick fix for the stock.
 
Posts: 5604 | Location: Eastern plains of Colorado | Registered: 31 October 2005Reply With Quote
One of Us
posted Hide Post
Try to get the European scope companies to do that!


The only easy day is yesterday!
 
Posts: 2758 | Location: Northern Minnesota | Registered: 22 September 2005Reply With Quote
One of Us
posted Hide Post
That sucks dude you should call me next time you go out.
 
Posts: 304 | Location: Prince George BC | Registered: 12 February 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Idaho Sharpshooter, the 9.3x64 testing will be put off for a while. (photo added)

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia