THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
works in progress
 Login/Join
 
One of Us
Picture of yumastepside
posted
....a couple of my projects...first is my VZ24 8-06 RCBS and then an un-issued Mosin in a modified 788 Rem. stock to be used in a duplicator....





Roger
 
Posts: 1049 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
pretty cool thoughts on the nagant


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40095 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by jeffeosso:
pretty cool thoughts on the nagant


Yes, very creative. Below is a Savage Super Sporter that I put in a Mauser stock.

 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post
.....bit more progress on the Mosin....



Roger
 
Posts: 1049 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post
......done enough for the copier



....the scopes only for looks, not attached

Roger
 
Posts: 1049 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post
...now a bit of work on the P14 stock....this will be for the 9.3x74r, so its a fairly heavy stock, chunky....



...first pic..as bought 303-25 with barrel destroyed by a wasp nest
...2 inches added to the butt and 1 to the comb
..pistol grip added, and bottom of fore-end
...sides of fore-end ( thats where the rats chewed it )
...getting close, a bit of work on the pistol grip now

Roger
 
Posts: 1049 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post


....now a full wood for the MN....original cut down stock with fore-end of an old Mauser added...

Roger
 
Posts: 1049 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post
...slimmed the fore-end, raised the comb, removed the belly from the rear stock, straightened the hollow under the mag box...now trying to position the pistol grip...at home with a broken toe ( don't ask !)so have plenty of time to play Roll Eyes



Roger
 
Posts: 1049 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post


.....a bit better than the " as bought " version!!

Roger
 
Posts: 1049 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post


.....the pic makes it look a bit short and clubbish but it actually has a 20" barrel and is quite slim...

Roger
 
Posts: 1049 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia