15 October 2016, 03:47
yumastepsideworks in progress
....a couple of my projects...first is my VZ24 8-06 RCBS and then an un-issued Mosin in a modified 788 Rem. stock to be used in a duplicator....
Roger
15 October 2016, 04:05
jeffeossopretty cool thoughts on the nagant
15 October 2016, 04:33
craigsterquote:
Originally posted by jeffeosso:
pretty cool thoughts on the nagant
Yes, very creative. Below is a Savage Super Sporter that I put in a Mauser stock.
19 October 2016, 13:00
yumastepside.....bit more progress on the Mosin....
Roger
20 October 2016, 13:29
yumastepside......done enough for the copier
....the scopes only for looks, not attached
Roger
02 November 2016, 12:23
yumastepside...now a bit of work on the P14 stock....this will be for the 9.3x74r, so its a fairly heavy stock, chunky....
...first pic..as bought 303-25 with barrel destroyed by a wasp nest
...2 inches added to the butt and 1 to the comb
..pistol grip added, and bottom of fore-end
...sides of fore-end ( thats where the rats chewed it )
...getting close, a bit of work on the pistol grip now
Roger
24 November 2016, 03:50
yumastepside
....now a full wood for the MN....original cut down stock with fore-end of an old Mauser added...
Roger
24 November 2016, 03:54
yumastepside...slimmed the fore-end, raised the comb, removed the belly from the rear stock, straightened the hollow under the mag box...now trying to position the pistol grip...at home with a broken toe ( don't ask !)so have plenty of time to play

Roger
24 November 2016, 04:20
yumastepside
.....a bit better than the " as bought " version!!
Roger
26 November 2016, 11:50
yumastepside
.....the pic makes it look a bit short and clubbish but it actually has a 20" barrel and is quite slim...
Roger