THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Brevex Dress Rehearsal (Update)
 Login/Join
 
one of us
Picture of Toomany Tools
posted
Here's a few shots of a project I'm working on. It's a Brevex (pronounced Brev-o for those of you in Rio Linda), and is now chambered in .450 Rigby. Still lots of work to do but I think it's coming along nicely.
















John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
One of Us
Picture of srtrax
posted Hide Post
quote:
Still lots of work to do but I think it's coming along nicely.


Damn right it is, nice looking rifle!
Feel free to show us the finished project also...


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
one of us
Picture of fla3006
posted Hide Post
Looks like it won't be much longer. I have a 500A-2 on a Brevex that's at about the same stage, should look somewhat similar.


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by srtrax:
quote:
Still lots of work to do but I think it's coming along nicely.


Damn right it is, nice looking rifle!
Feel free to show us the finished project also...


I'll echo that! Damn fine indeed!
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by fla3006:
Looks like it won't be much longer. I have a 500A-2 on a Brevex that's at about the same stage, should look somewhat similar.


Can't wait to see it, Forrest


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40035 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by Toomany Tools:
Still lots of work to do but I think it's coming along nicely.



Nicely indeed!


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
one of us
posted Hide Post
Oh My! Yet another in the AR collection of Big Bore Eye Candy.

Coming alone nicely indeed!


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
 
Posts: 6199 | Location: Charleston, WV | Registered: 31 August 2002Reply With Quote
one of us
Picture of Arriba
posted Hide Post
My Goodness! Is that a real Brevex, the one made by Marcel Pigatti? Eeker


____________

But there are also unknown unknowns ;-)
 
Posts: 735 | Location: Old Europe's center | Registered: 06 September 2004Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
It is a Brevex and it is stamped "Made in France". As for who made it I haven't a clue. It is only the second one I've seen and this one was previously barreled by P.O. Ackley in .460 Improved. I set the barrel back two threads and re-cut the chamber to .450 Rigby.


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
one of us
posted Hide Post
What is your targeted final gun weight?
 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
one of us
posted Hide Post
Thats a little more than "Comming along nicely"
 
Posts: 2443 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
great looking rifle.....I love it thumb


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
Looks great. I bet that wood really jumps to life with a little finish.
 
Posts: 876 | Registered: 09 June 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Toomany Tools:
It is a Brevex and it is stamped "Made in France". As for who made it I haven't a clue. It is only the second one I've seen and this one was previously barreled by P.O. Ackley in .460 Improved. I set the barrel back two threads and re-cut the chamber to .450 Rigby.


Marcel Pigatti was a friend, we shot together for many years in Versailles. He was drafted for labour in Germany during WW2 and ended in the Mauser factory where he had to do the maintenance on machines. It was his first contact with armamement industry.
When liberated in 1945, he established a workshop in Levallois Perret near the river Seine, West of Paris.
He worked for automobile industry, funnily he never had a driving license but many friends to take him shooting.
He designed the Brevex (Name came from Brevet, Patent) for magnum rounds, starting with 10.75 x 68mm rounds first.
Roy Weatherby visited him and bought some of his receivers to make his first Weatherby Magnum rifles.
I passed one of these rifles a few years ago, I still regret it today, a real beauty in .460, with the most beautiful wood and engraving I have ever seen.
He died 15 years ago. He made rifles for famous hunters, like Dr Corson.
He was one of the best shooters I know.
 
Posts: 157610 | Location: Ukraine, Europe. | Registered: 12 October 2002Reply With Quote
one of us
posted Hide Post
The action is worth over $ 4 000

http://www.dressels.com/id39.htm
 
Posts: 363 | Location: Paris, France | Registered: 20 March 2001Reply With Quote
One of Us
posted Hide Post
That rifle is just MAGNIFICENT.. WOW. What beautiful lines, exquisitely done, with awesome Walnut too.
Please show us the finished rifle..

Don




 
Posts: 5798 | Registered: 10 July 2004Reply With Quote
one of us
Picture of TC1
posted Hide Post
Compliments to the chef. That's going to be a beautiful rifle.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
One of Us
posted Hide Post
Nice work!! Jim Carmichel gave me a heads up re Brevex actions. there's apparently not enough clearance in the R. side of the ring to single load....Famous barrel maker J Buhmiller, found this out in the field on an elephant hunt...came close to ruining his whole day. Just thouht I'd pass it on
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
One of Us
posted Hide Post
Any updates?
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
posted Hide Post
John,
In my shop that would be just about 60% done, with 40% left to go.
Looks good so far, the devil is in the details.
You don't need to be in a race to the finish line as some around here seem to think is of the upmost importance. I like to put them up on the wall of my office for a few weeks to contemplate what's good, and what needs further attention.
Best,
Steve


ACGG Life Member, since 1985
 
Posts: 1838 | Registered: 07 February 2005Reply With Quote
one of us
Picture of fla3006
posted Hide Post
quote:
Edmond: Marcel Pigatti was a friend, we shot together for many years in Versailles. He was drafted for labour in Germany during WW2 and ended in the Mauser factory where he had to do the maintenance on machines. It was his first contact with armamement industry.
When liberated in 1945, he established a workshop in Levallois Perret near the river Seine, West of Paris.
He worked for automobile industry, funnily he never had a driving license but many friends to take him shooting.
He designed the Brevex (Name came from Brevet, Patent) for magnum rounds, starting with 10.75 x 68mm rounds first.
Roy Weatherby visited him and bought some of his receivers to make his first Weatherby Magnum rifles.
I passed one of these rifles a few years ago, I still regret it today, a real beauty in .460, with the most beautiful wood and engraving I have ever seen.
He died 15 years ago. He made rifles for famous hunters, like Dr Corson.
He was one of the best shooters I know.


That's very interesting. Jon Speed mentions a Mr. Polanski in his book "Original Oberndorf Sporting Rifles" as the progenator of the Brevex. Claims he was an engineer with Polish Arms at Radom, moved to France after WWII, purchased machinery from MAS to build the Brevex magnum action.

Speed also claims only a few hundred were made, Tom Burgess corraborated that with me and Tom was extremely knowledgeable about Mausers. I know of 3 early Weatherby 460s built on Brevex actions, one is in the Weatherby archives, this example belonged to Bobby Burns of Wichita Falls, TX:



NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by fla3006:




Up until now, you've had me salivating at the Mausers you own or covet. I don't like this one. It looks like it belongs to a "comic book superhero".
Sorry fla, it's just very different from what I've come to associate as your type of rifle.
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
one of us
Picture of fla3006
posted Hide Post
I understand. I wouldn't build one that way myself. But in the 50s-60s, California was the style, think 1959 Cadillac.


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
one of us
Picture of TC1
posted Hide Post
Isn't that a Weatherby Crown Custom? You can still get one almost just like it today if anyone likes it. The world came to a stop in the 1950's according to the weatherby custom shop! It's not my kind of weird but I can still appreciate it.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
one of us
Picture of fla3006
posted Hide Post
Is similar to a Crown grade, has all the gaudy bells and whistles. Was custom built for Bobby Burns in 1957, a prominant big game hunter of the day, a friend of Roy W. and an investor in his company, 3rd 460 made. I bought it for the action but decided not to tear it up after I researched it. Have since been offered ALOT of money.


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
Regulated the sights today and this rifle shoots! This target was at 50 yards, using 550 grain Norma factory ammo. My brother's eyes are better than mine so after I got the sight filed to where I wanted it he shot this group.



We had one more round to fire so this target was 100 yards out.



Also, I looked into the issue raised by Duane, who was told by Jim Carmichel that the Brevex couldn't be single loaded. I guess this one's different because I didn't have any trouble fitting the extractor so it will snap over a round in the chamber.


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
One of Us
posted Hide Post
Thanks for the update! Nice shooting!
 
Posts: 1700 | Location: USA | Registered: 04 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia