THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
gunsmith needed...
 Login/Join
 
one of us
posted
any one out there know where I can send my Ruger 77 RSI 243 to be rebarreld to a 358 win? The ruger is in really good shape and I sure would like it to be returned back to me this way...but with a 358 win barrel!! woooo hooo!
 
Posts: 1294 | Registered: 24 January 2004Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Dave,
call IT&D... good folks, douglas barrels,... and pretty fast...

or pacnor!
jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of Doc
posted Hide Post
I am not all that familiar with the 358. Will the 243 bolt face work on it?

There's a ton of smiths out there that can do the work for you.

Try John Noveske at Noveske Rifleworks.

He is a former PacNor employee. Mostly uses pacnor bbls. He built my 30.06. Knows his stuff.


Ted Kennedy's car has killed more people than my guns
 
Posts: 7906 | Registered: 05 July 2004Reply With Quote
one of us
posted Hide Post
http://itdcustomgun.com/


jeffe, are these the folks you are talking about?

Dave
 
Posts: 1294 | Registered: 24 January 2004Reply With Quote
One of Us
posted Hide Post
Dave, if your located in Lubbock, TX, this guy is in your back yard. Mike Bryant. He has the reamer for 358 and is close enough to visit and drop off the gun without the shipping BS.

http://www.bryantcustom.com/


Thaine
"Begging hands and bleeding hearts will always cry out for more..." Ayn Rand

"Life may not be the party we hoped for, but while we are here, we might as well dance" Jeanne C. Stein
 
Posts: 730 | Location: New Mexico USA | Registered: 02 July 2004Reply With Quote
one of us
posted Hide Post
Thaine,

thanks for the heads up-you ever use this fella?

Dave
 
Posts: 1294 | Registered: 24 January 2004Reply With Quote
One of Us
posted Hide Post
No, but I have seen a lot of good reports on him. He spends time on the 6mmBR board and another one or two. Suggest a google and see what you turn up. Appears to be an accuracy (BR) smith, which is fine for what you want.
TH


Thaine
"Begging hands and bleeding hearts will always cry out for more..." Ayn Rand

"Life may not be the party we hoped for, but while we are here, we might as well dance" Jeanne C. Stein
 
Posts: 730 | Location: New Mexico USA | Registered: 02 July 2004Reply With Quote
One of Us
posted Hide Post
LubbockDave, Mike Bryant is a great, honest guy, and will deliver when he says at the price he quotes. He has done a few things over the years for me and I am very pleased. His website is one for all to see. He will not do your Mauser.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia