THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
98 mauser trigger pin source
 Login/Join
 
Moderator
Picture of jeffeosso
posted
Anyone know where i can get some of the pins for holding the 98 trigger to the receiver?

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
Here's one place, but they are a buck a pop. k98 parts


"There are only three kinds of people; those who can count, and those who can't."
 
Posts: 1366 | Location: Houston, TX | Registered: 10 February 2003Reply With Quote
one of us
Picture of Tex21
posted Hide Post
Jeffe,

You couldn't make up a couple?


Jason

"Chance favors the prepared mind."
 
Posts: 1449 | Location: Dallas, Texas | Registered: 24 February 2004Reply With Quote
One of Us
posted Hide Post
SARCO and/or Numrich.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
One of Us
Picture of lee440
posted Hide Post
Look through your dremel tool assortment. Some of the shanks from the off brands are big enough. I've been known to sacrifice a stone for the shaft.


DRSS(We Band of Bubba's Div.)
N.R.A (Life)
T.S.R.A (Life)
D.S.C.
 
Posts: 2272 | Location: Texas | Registered: 18 May 2004Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
I've used the cheap dremel tools as well as broken drill bits.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
one of us
posted Hide Post
Jeffe,

Get more than one, I am missing one also.


Billy,

High in the shoulder

(we band of bubbas)
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
one of us
posted Hide Post
Tennessee Gun Parts

http://www.tngunparts.com

Free shipping
 
Posts: 219 | Location: Spring, Texas | Registered: 03 October 2003Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Lee, ramrod
thanks for the tip on old dremel tools.. lord knows i've got more than one burnt out stone and/or router tip

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
I bought a piece of #31 drill rod and just cut off what I need as I go. Only costs a couple dollars for a piece 18" long and you can get alot of pins from that.
 
Posts: 323 | Location: Northeastern, PA | Registered: 21 June 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia