98 mauser trigger pin source

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/849104592

04 July 2005, 23:51

jeffeosso

98 mauser trigger pin source

Anyone know where i can get some of the pins for holding the 98 trigger to the receiver?

jeffe

opinions vary band of bubbas and STC hunting Club

Words aren't Murder - Political assassination is MURDER
Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com

05 July 2005, 00:39

Glen71

Here's one place, but they are a buck a pop. k98 parts

"There are only three kinds of people; those who can count, and those who can't."

05 July 2005, 00:49

Tex21

Jeffe,

You couldn't make up a couple?

Jason

"Chance favors the prepared mind."

05 July 2005, 00:51

Rick 0311

SARCO and/or Numrich.

05 July 2005, 01:32

lee440

Look through your dremel tool assortment. Some of the shanks from the off brands are big enough. I've been known to sacrifice a stone for the shaft.

DRSS(We Band of Bubba's Div.)
N.R.A (Life)
T.S.R.A (Life)
D.S.C.

05 July 2005, 03:29

ramrod340

I've used the cheap dremel tools as well as broken drill bits.

As usual just my $.02
Paul K

05 July 2005, 04:09

Gringo Cazador

Jeffe,

Get more than one, I am missing one also.

Billy,

High in the shoulder

(we band of bubbas)

05 July 2005, 04:41

huntingcat

Tennessee Gun Parts

http://www.tngunparts.com

Free shipping

05 July 2005, 07:36

jeffeosso

Lee, ramrod
thanks for the tip on old dremel tools.. lord knows i've got more than one burnt out stone and/or router tip

jeffe

05 July 2005, 16:38

vip

I bought a piece of #31 drill rod and just cut off what I need as I go. Only costs a couple dollars for a piece 18" long and you can get alot of pins from that.