The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing ruger 77 mii actions screws thread pitchGo | New | Find | Notify | Tools | Reply | |
| ruger 77 mii actions screws thread pitch | Login/Join |
Moderator |
Anyone know? Looks like I am going to need to make a set 3/8" longer than stock jeffe opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | ||
|
| One of Us |
1/4x28 for the front, 3/16x32 for center and rear. | |||
|
| Moderator |
thanks rick! jeffe opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
Rick, the center and rear are standard #10-32 UNF threads. the differnce is very slight, but you can get the #10's at a hardware store.  Rusty's Action Works Montross VA. Action work for Cowboy Shooters & Manufacturer of Stylized Rigby rifle sights. http://i61.photobucket.com/alb.../th_isofrontleft.jpg | |||
|
| One of Us |
rusty, I don’t need them...but if I did I think I would go with the proper sized screws since they are action screws. Just my opinion. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing ruger 77 mii actions screws thread pitch
Visit our on-line store for AR Memorabilia