The Accurate Reloading Forums
ruger 77 mii actions screws thread pitch

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/745109424

13 February 2006, 03:18
jeffeosso
ruger 77 mii actions screws thread pitch
Anyone know? Looks like I am going to need to make a set 3/8" longer than stock

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
13 February 2006, 05:48
Rick 0311
1/4x28 for the front, 3/16x32 for center and rear.
13 February 2006, 06:23
jeffeosso
thanks rick!
jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
13 February 2006, 06:30
Rusty Marlin
Rick,
the center and rear are standard #10-32 UNF threads. the differnce is very slight, but you can get the #10's at a hardware store. Wink


Rusty's Action Works
Montross VA.
Action work for Cowboy Shooters &
Manufacturer of Stylized Rigby rifle sights. http://i61.photobucket.com/alb.../th_isofrontleft.jpg
13 February 2006, 06:41
Rick 0311
quote:
Originally posted by Rusty Marlin:
Rick,
the center and rear are standard #10-32 UNF threads. the differnce is very slight, but you can get the #10's at a hardware store. Wink


rusty,

I don’t need them...but if I did I think I would go with the proper sized screws since they are action screws. Just my opinion.