Go | New | Find | Notify | Tools | Reply |
new member |
I have a Browing A-Bolt that has a very shiney stock. I would like to take the shine off of it. What would you recommed that I do to get this done and will it harm the stock? Thanks, Darrell Huntin Fool from Georgia. | ||
|
Moderator |
that's a VERY tough finish. VERY tough... you could try rottenstone and veggie oil on a WHITE cloth. don't use a red shop rag (heh), or you can try some 800gr wet/dry... dab some vasoline on the stock to keep it "wet" jeffe #dumptrump opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
You can knock it down with 0000 steel wool. Call the Tech folks at Brownells (1-800-741-0015), they'll steer you in the right direction. | |||
|
one of us |
I knocked down the gloss on a Browning BAR a few years ago by giving it a gentle rub-down with rottonstone applied with a wet(water) piece of old felt hat. The customer was very pleased witht he result. I would probably use oil rather than water if I were to do it again. If It Doesn't Feed, It's Junk. | |||
|
new member |
Thanks for all the replies. Problem solved. I just sent the stock off to have it camoed. Darrell Huntin Fool from Georgia. | |||
|
One of Us |
That ought to knock the shine, but good! | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia