The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Interarms actionGo | New | Find | Notify | Tools | Reply | |
| Interarms action | Login/Join |
One of Us |
is a Mark X interarms action in 7mm remmag long enough to accomodate a 375 length cartridge without altering the magazine or removing metal? _____________________ Reducing the world's lead supply.....one cat at a time. | ||
|
one of us |
No.  Aut vincere aut mori | |||
|
One of Us |
it'll do for the .375 Ruger but not the H&H. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| One of Us |
What about a model 70 in 300 win mag _____________________ Reducing the world's lead supply.....one cat at a time. | |||
|
one of us |
Yes with very minor changes. You need to replace the mag box with the longer box or simply remove the spacer block. Same for the bolt stop and ejector. Replace them with the long magnum parts or simply shorten them. I have done it both ways. I think the loading port on the long magnum M70 might be a little longer but I have made several 7STWs from 7mags and have no trouble loading or ejecting a loaded shell. As usual just my $.02 Paul K | |||
|
| one of us |
Make the 7Mag into a .375 Ruger. A shot not taken is always a miss | |||
|
| one of us |
Are reamers available at this time? Frank | |||
|
Moderator |
Frank 375 ruger reamrs? yep... and a couple guys here have them! opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
reamers for the .375 Ruger necked up and down to almost every reasonable conceivable caliber are available..... Pick anything you want and call PTG! A 416 Ruger was sold in the classifieds a few weeks ago. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia