The Accurate Reloading Forums
Interarms action

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/708106647

16 October 2007, 00:47
Lfaler
Interarms action
is a Mark X interarms action in 7mm remmag long enough to accomodate a 375 length cartridge without altering the magazine or removing metal?


_____________________
Reducing the world's lead supply.....one cat at a time.
16 October 2007, 01:03
z1r
quote:
Originally posted by Lfaler:
is a Mark X interarms action in 7mm remmag long enough to accomodate a 375 length cartridge without altering the magazine or removing metal?


No.




Aut vincere aut mori
16 October 2007, 01:03
vapodog
it'll do for the .375 Ruger but not the H&H.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
16 October 2007, 03:16
Lfaler
What about a model 70 in 300 win mag


_____________________
Reducing the world's lead supply.....one cat at a time.
16 October 2007, 04:40
ramrod340
quote:
What about a model 70 in 300 win mag

Yes with very minor changes. You need to replace the mag box with the longer box or simply remove the spacer block. Same for the bolt stop and ejector. Replace them with the long magnum parts or simply shorten them. I have done it both ways. I think the loading port on the long magnum M70 might be a little longer but I have made several 7STWs from 7mags and have no trouble loading or ejecting a loaded shell.


As usual just my $.02
Paul K
16 October 2007, 07:28
jstevens
Make the 7Mag into a .375 Ruger.


A shot not taken is always a miss
17 October 2007, 18:31
Frank Martinez
Are reamers available at this time?
Frank
17 October 2007, 18:55
jeffeosso
Frank
375 ruger reamrs? yep... and a couple guys here have them!


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
17 October 2007, 19:19
vapodog
reamers for the .375 Ruger necked up and down to almost every reasonable conceivable caliber are available.....

Pick anything you want and call PTG! A 416 Ruger was sold in the classifieds a few weeks ago.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill