one of us posted 23 February 2002 18:33
Can someone who has a Winchester Model 70 338 Win Mag tell me the diameter of the barrel at the muzzle? Thanks!
-- Scott
Posts: 47 | Location: Kalispell, MT | Registered: 24 September 2001
IP
one of us According to my dial calipers on my left hand classic stainless 338, that number would be .581" at muzzle. I believe that Winchester uses the same contour for all the mag. calibers with 26" barrels. Hope this helps.
Posts: 2851 | Location: Michigan | Registered: 02 September 2001
IP
one of us Wow, how's that for quick and friendly service. Thanks!
-- Scott
Posts: 47 | Location: Kalispell, MT | Registered: 24 September 2001
IP
one of us Ken Cline,
If you ever think about departing with your left hand .338 Classic Stainless, please, by all means contact me.
Thanks!
Posts: 653 | Location: Juneau, Alaska | Registered: 09 February 2001
IP
One of Us Scott, my last Win 70 stainless 338 I cut back to 22" (I've had a couple with that length)... it's .622" @ 22".
Brad Amundson
One of Us I just dug-out the barrel piece from my shortened 338 barrel... it mic's .572" at the 26" end. While safe, still too thin, IMO, for a .338" bore.
Brad
