23 February 2002, 18:33
swehrmanWinchester 338 Win Mag barrel diameter.
Can someone who has a Winchester Model 70 338 Win Mag tell me the diameter of the barrel at the muzzle? Thanks!
-- Scott
23 February 2002, 18:36
Ken ClineAccording to my dial calipers on my left hand classic stainless 338, that number would be .581" at muzzle. I believe that Winchester uses the same contour for all the mag. calibers with 26" barrels. Hope this helps.
23 February 2002, 18:39
swehrmanWow, how's that for quick and friendly service. Thanks!
-- Scott
24 February 2002, 04:20
CKKen Cline,
If you ever think about departing with your left hand .338 Classic Stainless, please, by all means contact me.
Thanks!
CK
24 February 2002, 05:15
BradScott, my last Win 70 stainless 338 I cut back to 22" (I've had a couple with that length)... it's .622" @ 22".
Brad Amundson
25 February 2002, 05:01
South40Measured my 26" stainless classic muzzle at 0.5565". This is a right handed M-70. Can't tell you why there is a .03" variance between the two rifles.
25 February 2002, 08:35
BradI just dug-out the barrel piece from my shortened 338 barrel... it mic's .572" at the 26" end. While safe, still too thin, IMO, for a .338" bore.
Brad