THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Please describe Parker Hale Mauser fireing pin intall. Tools needed etc.

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Please describe Parker Hale Mauser fireing pin intall. Tools needed etc.
 Login/Join
 
ColoradoMatt
One of Us
posted
I know how to do the military 98 take down, but I can't figure out the commercial version without a little help. Thanks in advance.


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
 
Posts: 3307 | Location: Northern Colorado | Registered: 22 November 2005Reply With Quote
D Humbarger
one of us
posted Hide Post
Works the same. you just don't have the "wing" safety. I place the cocking in soft jaws & pull the on the bolt body then place a penny between the cocking piece & the shroud to hold it back.
 
Posts: 8352 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
i use a dime .. works every time..


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40529 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
D Humbarger
one of us
posted Hide Post
quote:
i use a dime .. works every time..



Im too cheap to use a dime. Big Grin
 
Posts: 8352 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
ramrod340
one of us
Picture of ramrod340
posted Hide Post
quote:
Im too cheap to use a dime.

Penny works just as well. I thought I once had a Parker Hale with the hole through the cocking piece like a MKX. Then again my memory always has holes in it.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
HerrMesser
One of Us
posted Hide Post
I use a small pocket screwdriver and the ones with the hole I use a pin.

Rad


NRA Benefactor Member
 
Posts: 344 | Location: Bean Town in the worthless nut state | Registered: 23 July 2005Reply With Quote
ColoradoMatt
One of Us
posted Hide Post
Thanks guys. That was no sweat.


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
 
Posts: 3307 | Location: Northern Colorado | Registered: 22 November 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Please describe Parker Hale Mauser fireing pin intall. Tools needed etc.

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia