The Accurate Reloading Forums
Please describe Parker Hale Mauser fireing pin intall. Tools needed etc.

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/4091006811

13 October 2009, 04:52
ColoradoMatt
Please describe Parker Hale Mauser fireing pin intall. Tools needed etc.
I know how to do the military 98 take down, but I can't figure out the commercial version without a little help. Thanks in advance.


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
13 October 2009, 04:58
D Humbarger
Works the same. you just don't have the "wing" safety. I place the cocking in soft jaws & pull the on the bolt body then place a penny between the cocking piece & the shroud to hold it back.



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
13 October 2009, 06:12
jeffeosso
i use a dime .. works every time..


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
13 October 2009, 06:30
D Humbarger
quote:
i use a dime .. works every time..



Im too cheap to use a dime. Big Grin



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
13 October 2009, 06:39
ramrod340
quote:
Im too cheap to use a dime.

Penny works just as well. I thought I once had a Parker Hale with the hole through the cocking piece like a MKX. Then again my memory always has holes in it.


As usual just my $.02
Paul K
14 October 2009, 07:32
HerrMesser
I use a small pocket screwdriver and the ones with the hole I use a pin.

Rad


NRA Benefactor Member
17 October 2009, 03:22
ColoradoMatt
Thanks guys. That was no sweat.


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."