THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
300RUM to 404 Jeffery Conv?
 Login/Join
 
one of us
Picture of Blacktailer
posted
This seems like a no-brainer but I'm no gunsmith. If you wanted to convert a Rem 700 in 300RUM to 404 Jeffery (Yeah I know it's not CRF) would you only have to swtch barrels and stocks? Would it be just as easy to switch back again?


Have gun- Will travel
The value of a trophy is computed directly in terms of personal investment in its acquisition. Robert Ruark
 
Posts: 3831 | Location: Cave Creek, AZ | Registered: 09 August 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
there's a small but necessary item to correct.....the case head on the RUM cases is slightly rebated. The .404 Jeffery is about .015 (or so) larger.

I'm not sure you can open up the bolt face and still use the extractor....maybe you add a sako style extractor after opening the bolt face a little

You can also turn the case rims of the jeffery case to the RUM case head as well.....hardly seems the thing to do but it can be done.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
it's that easy IF the cases fit.

so, you would have two things..
1: try some 404 brass on your rem.. might fit
2: use reformed rum cases?

Billy,
did you have to open your bolt face?

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40081 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
Jeffe,

Yeah we opened the bolt face a hair if I remember correctly, and seem like took a hair off face so it wouldhit hit the case, but I can't remember, but it took Dewight Marshal about 60 seconds to do it with half that him jacking with me about, oh my I slipped and screwed you bolt face up. Getting Jacked with is a small price to pay for a machinest of Dewights caliber to do it for next to nothing.


Billy,

High in the shoulder

(we band of bubbas)
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
one of us
posted Hide Post
I personally would not do a 404 on a Rem, I'd peddle that sucker and get a Win Classic in ultra and go that direction. Make a much nicer rifle. I think a 404 shold be on a Mauser or Win or CZ


Billy,

High in the shoulder

(we band of bubbas)
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia