THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Re: Glass bedding thanks
 Login/Join
 
hglass
one of us
posted
I use a rubber o-ring. Works for me
 
Posts: 167 | Registered: 02 January 2004Reply With Quote
vapodog
One of Us
Picture of vapodog
posted Hide Post
Quote:

what should i use for a sealer in the barrel
channel?



several coats of PolyUrethane finish will do the job.....
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
Atkinson
one of us
posted Hide Post
Any good commercial gun finish thinned 50-50...A good inletting sealer is Marine Spar Varnish thinned and several coats applied, wiped and let dry...But always go back and check the inletting as coats of finish can change a good inletting job, just sand out the high spots....
 
Posts: 42552 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia