Re: Glass bedding thanks

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/362106751

13 December 2004, 02:42

hglass

Re: Glass bedding thanks

I use a rubber o-ring. Works for me

13 December 2004, 05:04

vapodog

Quote:

what should i use for a sealer in the barrel
channel?

several coats of PolyUrethane finish will do the job.....

13 December 2004, 09:50

Atkinson

Any good commercial gun finish thinned 50-50...A good inletting sealer is Marine Spar Varnish thinned and several coats applied, wiped and let dry...But always go back and check the inletting as coats of finish can change a good inletting job, just sand out the high spots....