The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Do MRC actions fit the same stocks as Winchester Classic Actions?Go | New | Find | Notify | Tools | Reply | |
| Do MRC actions fit the same stocks as Winchester Classic Actions? | Login/Join |
| One of Us |
Will a Montana Rifle Company long action fit a stock inletted for a Winchester classic (CRF) long action? | ||
|
| one of us |
There are (minor) differences at least around the tang and the bottom metal. Nothing that can't be fixed, but it is not a drop-in fit. See also this post from McGowenRifle - a past MRC employee: https://forums.accuratereloading.com/eve/forums/a/tpc/f/...=674102817#674102817 - mike ********************* The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart | |||
|
Moderator |
pretty close, and no actions gaps.. that is, everything you have to change would be removing material opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
if you drop a MRC into a Win action you'll have a big gap to fill around the tang | |||
|
| one of us |
I had no problems with the tang but had to widen and lengthen the inetting for the front ring. This was in a original Winchester plastic stock. Also had to adjust the inletting for the bottom metal. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Do MRC actions fit the same stocks as Winchester Classic Actions?
Visit our on-line store for AR Memorabilia