THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Removing factory finish on CZ 550 LUX
 Login/Join
 
lal
One of Us
posted
Could the pro's please advise as to what chemical I can use to remove the factory laquer finish on my rifles stock? Many thanks guys.
 
Posts: 886 | Location: Eastern Cape, South Africa | Registered: 08 January 2010Reply With Quote
Code4
One of Us
Picture of Code4
posted Hide Post
Normal paint stripper will work. Often 2-3 coats. Let the finish curl up then scrape off. You have to wash it all off completely at the end though and let the stock completely dry. Then sand.
 
Posts: 1433 | Location: Australia | Registered: 21 March 2008Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
i like citri strip .. but don't get it on your skin


opinions vary band of bubbas and STC hunting Club


Words aren't Murder - Political assassination is MURDER
Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 43128 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
lal
One of Us
posted Hide Post
Thanks for the replies, Im going to use paint stripper.
 
Posts: 886 | Location: Eastern Cape, South Africa | Registered: 08 January 2010Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia