THE ACCURATERELOADING.COM GUNSMITHING FORUM

Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
My new Mexican Mauser-photos
 Login/Join
 
One of Us
posted
I asked TC1 to post a couple photos of My double square bridge Mexican. It was built by David Christman. The wood came from Roger Vardy of Australia. James Anderson did the half octagon barrel. David fashioned an island rear iron sight, and a NECG banded front sight. He made a checkered bolt release, Ed Lapour safety, and Blackburn bottom metal. I wish that I could do a better job with the closeup of the checkering. It is 26LPI. He said that he sure didn't charge enough for it. Most of the custom items are self explanatory. It is in 275 Rigby, OK? Hopefully my good friend will be back from vacation in a couple weeks and can take some photos that will do David's work more credit. This was a 2 year project that could have come together sooner had David's wife not gotten gravely ill and the heat treat lost the receiver and it took 90 days to find it.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
Picture of TC1
posted Hide Post
HA!, and I got to see it before anyone else. This is what this forum should be about. A rifle that is not only unique but extremely beautiful. David out did himself on this one.

Butch, that is an amazing rifle. Thank you for sharing with us.

Terry













--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
One of Us
Picture of gunmaker
posted Hide Post
Looks great Butch! David did a great job.
Hope you hunt with it often. BOOM


gunmaker
------------------
James Anderson Metalsmith & Stockmaker
WEB SITE

More Pics on FLICKR
 
Posts: 1862 | Location: Western South Dakota | Registered: 05 January 2005Reply With Quote
one of us
posted Hide Post
Butch-

Thank you for sharing your lovely rifle with us; she is, indeed, a beauty.

Terry-

Thanks for doing the honors, we needed some rifle "pin-ups" on the forum; it's been too long.

Butch, is that a Gerome Glimm bolt handle on your rifle? That is an incredible piece of wood.


May the wind be in your face and the sun at your back.

P. Mark Stark
 
Posts: 1323 | Location: San Antonio, Texas | Registered: 04 March 2003Reply With Quote
One of Us
posted Hide Post
Mr Stark,
I really don't know. David showed me some options and I chose that one. David is a real pleasure to work with. He communicates well, but does not do photos or email.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
Picture of jimatcat
posted Hide Post
very nice wood... i like the skeleton grip cap.... beer


go big or go home ........

DSC-- Life Member
NRA--Life member
DRSS--9.3x74 r Chapuis
 
Posts: 2844 | Location: dividing my time between san angelo and victoria texas.......... USA | Registered: 26 July 2006Reply With Quote
one of us
Picture of fla3006
posted Hide Post
Beautiful, worth the wait, effort, expense, etc.


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
One of Us
posted Hide Post
Very nice! I think 275 Rigby fits it to a tee, much classier than 7x57.
 
Posts: 1681 | Registered: 15 October 2006Reply With Quote
one of us
Picture of TC1
posted Hide Post
quote:
Originally posted by swheeler:
Very nice! I think 275 Rigby fits it to a tee, much classier than 7x57.


Bite your lip! rotflmo

terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
amazing!!!!


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
Thanks for the photos.....it's another gorgeous rifle.....I appreciate it!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of WVFred
posted Hide Post
Beautiful thumb


DRSS Member
 
Posts: 909 | Location: West Virginia | Registered: 18 February 2004Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
Very nice rifle. thumb



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
posted Hide Post
Instant family heirloom...
 
Posts: 16534 | Location: Between my computer and the head... | Registered: 03 March 2008Reply With Quote
One of Us
posted Hide Post
Absolutely stunning wood and metal work.

Hugh
 
Posts: 435 | Location: GA, USA | Registered: 14 January 2005Reply With Quote
one of us
posted Hide Post
Butch

What a nice rifle. David's work is a piece of art as usual.

David told me at the Shilen Swap Meet that welding the square bridges was easy........yeah right!

Are you going to show it some deer and antelope this year?


Craftsman
 
Posts: 1551 | Location: North Texas | Registered: 11 February 2001Reply With Quote
One of Us
posted Hide Post
I have a 2 1/2X8 VariX111 Leupold matt finish scope for it. I plan on getting a few handling marks on it on opening day. David said that it liked 42grns. of H4895 and 140grn Ballistic Tips, and 3.052 overall length I believe he said.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Butch:

Looks Great. Thought you were getting this rifle made for your grandson? Will you adopt me?

Nat
 
Posts: 322 | Location: Youngsville, NC | Registered: 23 April 2004Reply With Quote
one of us
Picture of Prewar70
posted Hide Post
A rifle that nice deserves a leather-covered pad.
 
Posts: 895 | Location: Minneapolis, Minnesota | Registered: 13 July 2004Reply With Quote
One of Us
Picture of srtrax
posted Hide Post
Thanks for posting this "WOW" any better pictures would have made a grown man cry! Big Grin
Good for you and ENJOY...


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
one of us
posted Hide Post
Butch,

Oh My!!! ... sigh ...

I have a soft spot for small ring Mausers.

What a wonderful piece of work! As Homebrewer said: An "Instant family heirloom."

... sigh ...


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
 
Posts: 6199 | Location: Charleston, WV | Registered: 31 August 2002Reply With Quote
one of us
posted Hide Post
Butch

Great looking rifle. I am glad things turned out for the best.
Enjoy.

James
 
Posts: 658 | Location: W.Va | Registered: 20 August 2002Reply With Quote
One of Us
posted Hide Post
Dang BEAUTIFUL rifle!!
The wood is awsome, and I love the sights too.

MM


http://www.youtube.com/watch?v.../watch?v=qVQc386js7g

www.setfreesoldiers.com
www.soldiermade.com


Montana Maddness
Set Free Ministries MT.

7 days with out meat makes one Weak!
 
Posts: 422 | Location: Fort Benton MT. and in the wind! | Registered: 06 June 2008Reply With Quote
One of Us
posted Hide Post
Nicely done! Both the owner and the maker can be proud.


ACGG Life Member, since 1985
 
Posts: 1838 | Registered: 07 February 2005Reply With Quote
One of Us
Picture of Austin Hunter
posted Hide Post
Great looking rifle and caliber!

Now go shoot a thousand elephants with it like Karamojo Bell did!


"Evil is powerless if the good are unafraid" -- Ronald Reagan

"Ignorance of The People gives strength to totalitarians."

Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness.
 
Posts: 3080 | Location: Austin, Texas | Registered: 05 April 2006Reply With Quote
One of Us
posted Hide Post
Nicely done. I'm curious about the welding on the ring...how was it done./..any concerns?
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
one of us
posted Hide Post
Very nice and that is a pretty stick of lumber. I bet you can't wait to get it out on the range.
 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
One of Us
posted Hide Post
That's INCREBIDLE! as my two year old would say.

Very nice, congrats and enjoy it.

TG
 
Posts: 341 | Location: MI | Registered: 24 January 2005Reply With Quote
one of us
posted Hide Post
My hunting buddy's nephew would say it is "congusting"--a word he uses to describe things that aren't his but he thinks should be!! Big Grin


An old pilot, not a bold pilot, aka "the pig murdering fool"
 
Posts: 2901 | Registered: 14 October 2004Reply With Quote
one of us
posted Hide Post
Couldn't you afford a piece of wood without all the watermelon stripes? Big Grin
 
Posts: 9207 | Registered: 22 November 2002Reply With Quote
One of Us
posted Hide Post
Duane, I am not familiar with the welding method. I understand that the receivers are annealed, heat sink material is put in the ring and around it. You spot it with the tig in one small place, go chamber a barrel, tig another small place and then inlet a stock. After a great deal of time it has been welded and then machined. It is then sent to be recased by a reputable heat treat firm. I wondered about the reputable part when they lost mine. Fortunetly they eventually found it. David and his partner, Jim Dubell, from the old days have done several without problems. I am not an engineer and I am not qualified to tell you that it wouldn't give a problem. I personally am not concerned.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Butch,
nice,very nice.
Now that it has been heatreated, what pressures can you safely load to?
 
Posts: 9434 | Location: Here & There- | Registered: 14 May 2008Reply With Quote
one of us
Picture of TC1
posted Hide Post
quote:
Originally posted by Trax:
Butch,
nice,very nice.
Now that it has been heatreated, what pressures can you safely load to?


I'm not Butch but, I'm having one built just like it in .260 Remington. About 57K PSIA. would be my stopping point.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
One of Us
posted Hide Post
Trax,
I haven't looked at a load book, but David said it liked 42grn of H4895 and a 140grn Ballistic Tip. I would have to look at the loading book. No reason to hot rod it.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Thanks, Butch...seems like a prudent method. Pressure is an interesting topic. Years ago, the there was interest in pursuing test rounds to be sponsored by the ACGG. I was surprised that a large bloc of members did not wish their guns subjected to any test???

Anyway, the project fell flat due to lack of majority interest. I can't help but be surprised that we are about the only major arms producing country that does not have a proof house.

Cartridges of the World show average pressure of the 7.62 NATO at 50,000 max. Proof testing develops pressures of 67,500.

The problem is how do you make up a load to develop "proper" test pressure? I'm told that if proof rounds are unavailable, the heaviest loads available are fired in an oiled chamber, but I would find it hard to believe that the oil would raise pressures?? Certainly bolt "thrust" would increase...anyone had time to really investigate this?
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Duane Wiebe:
Thanks, Butch...seems like a prudent method. Pressure is an interesting topic. Years ago, the there was interest in pursuing test rounds to be sponsored by the ACGG. I was surprised that a large bloc of members did not wish their guns subjected to any test???

Anyway, the project fell flat due to lack of majority interest. I can't help but be surprised that we are about the only major arms producing country that does not have a proof house.

Cartridges of the World show average pressure of the 7.62 NATO at 50,000 max. Proof testing develops pressures of 67,500.

The problem is how do you make up a load to develop "proper" test pressure? I'm told that if proof rounds are unavailable, the heaviest loads available are fired in an oiled chamber, but I would find it hard to believe that the oil would raise pressures?? Certainly bolt "thrust" would increase...anyone had time to really investigate this?


I can see why they wouldn't want to submit their creations to proofing. So many ACGG members still stubornly cling to the notion that a Mauser doesn't require heat treating. One round of near 70KPI would quickly dispell that notion.
 
Posts: 583 | Registered: 28 May 2007Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by Duane Wiebe:
The problem is how do you make up a load to develop "proper" test pressure?


That's simple. Here we can turn to certain customers for guidance. Let's see, add a skosh more powder 'til the bolt won't open without a hammer and back off 3 grains. Go hunting! Big Grin

Actually, oil, being incompressible, would prevent the brass case from expanding therefore raising pressures. By how much I can't say, but the folks at H.P. White's Laboratory would probably have a good idea. I believe it's a similar process as that used to form bulges in barrels.

http://www.hpwhite.com/

Sorry for the interruption Butch, that's a fine looking rifle!


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
One of Us
posted Hide Post
Very nice indeed.
I have a mex action for sale if any one is inspred !
...tj3006


freedom1st
 
Posts: 2450 | Registered: 09 June 2005Reply With Quote
one of us
Picture of cordell
posted Hide Post
Absolutely beautiful, good luck with it and God bless. cordell
 
Posts: 336 | Location: Virginia | Registered: 09 September 2004Reply With Quote
one of us
posted Hide Post
Beautiful...


********************************
A gun is a tool. A moron is a moron. A moron with a hammer who busts something is still just a moron, it's not a hammer problem. Daniel77
 
Posts: 1275 | Location: Sydney, New South Wales, Australia | Registered: 02 May 2002Reply With Quote
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia