THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
375 H&H Mag Box For Charles Daly Mark X
 Login/Join
 
one of us
Picture of ElCaballero
posted
I have a new C Daly 375 length action. It came with the side button release for the floor plate. I prefer the in the bow style better. Will the trigger guard off of the old Interarms action fit? Or did they change the way they opened up the action? Does anyone have one of these that they would be willing to sell or trade? Does Blackburn make bottom metal for Chuck's recievers?


As a general rule, people are nuts!
spinksranch.com
 
Posts: 2095 | Location: Missouri, USA | Registered: 02 March 2002Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
They should fit just fine if you can find one.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
yep.. totally interchangeable.. you'll be unwhelmed at the actually work done on them (i finally got that schromf)

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40019 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Someone once said Sunny Hill makes one but I haven't been able to confirm that.

The MkX/CD is opened to the front only so you can buy a Blackurn standard and modify the box. Cut off the front and weld an extension.
If you look closely at the one you have, that is how Zastava does it.

The last option and one that works fine for an every-day hunter is to cut off the front and leave it. The front of the mag well functions as the front of the box; just make sure it doesn't undercut the ramp too far. If it does, build it up with bedding material. My Whitworth is set up this way in a good synthetic and it has functioned perfectly for 25 years in three hard kicking calibers: 300 Wby, 375 Wby and now 416 Rem.

Every year when I pull it apart, I think to myself I gotta finish that and every year I have something more critical to get done. But it works well regardless.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
one of us
Picture of ElCaballero
posted Hide Post
quote:
Originally posted by jeffeosso:
yep.. totally interchangeable.. you'll be unwhelmed at the actually work done on them (i finally got that schromf)

jeffe



???
Could you explain?

____________________________________

Thank you all for the responses. I think I will just get a standard length and get it lengthened. I have seen them around for $100 or so.


As a general rule, people are nuts!
spinksranch.com
 
Posts: 2095 | Location: Missouri, USA | Registered: 02 March 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Sure...
this are modified military parts... or at least from the military build... it looks like they could teach us a couple things on how to dress up surp to nice.. but they are NOT purpose built like a blackburn

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40019 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
(i finally got that schromf

Ok Jeff I am dense sometimes I am not following you.
 
Posts: 1486 | Location: Idaho | Registered: 28 May 2004Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by schromf:
(i finally got that schromf

Ok Jeff I am dense sometimes I am not following you.


when you tried to tell me the diff in quality from a blackburn to a markx .. both work.. the markx is just looks more "worked" than the blackburn of "designed"
jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40019 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
Oh I see said the blind man.

Yeah but its not a real fair comparison is it.

Did you look over milling the floorplate release button on the Mark X, simple slick fix to improve the new model Mark X floorplate release.
 
Posts: 1486 | Location: Idaho | Registered: 28 May 2004Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
On my Daly's with the cross pin. I mill off the top half(closest to the stock) Still gives me plenty to push and allow me to not have the trench in the stock.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by ramrod340:
On my Daly's with the cross pin. I mill off the top half(closest to the stock) Still gives me plenty to push and allow me to not have the trench in the stock.


Yes, thats what I was discussing. Only 1/3 works and both sides are what I was describing. Simple little fix.
 
Posts: 1486 | Location: Idaho | Registered: 28 May 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia