THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    Is the 9.3x74R ENOUGH gun for Cape Buff?
Page 1 2 3 4 
Go
New
Find
Notify
Tools
Reply
  
Is the 9.3x74R ENOUGH gun for Cape Buff?
 Login/Join
 
Oxon
One of Us
posted Hide Post
quote:
Originally posted by 500N:
quote:
Originally posted by RAC:
Is it hard to get the 320 grain to regulate in a 9.3 that was regulated with the 286 grain bullets? I was very satisfied with the 286 Woodleighs out of my Chapuis. Don't see any need to go to a larger bullet.


I would like to try this with my 9.3 Chapuis. If anyone who has tried it can suggest a load I would appreciate it.
Most people I know with 9.3 DR's have been able to get it to work.

You can only give it a go.

They (the 9.3's) seem to be a bit like the 375H&H in being able to
get all bullets to work.


.


Oxon
 
Posts: 323 | Registered: 27 November 2009Reply With Quote
jwp475
One of Us
Picture of jwp475
posted Hide Post
You will have to try the 320"s to see if they regulate in your Double, they did in Jack and Shown's Doudles


_____________________________________________________


A 9mm may expand to a larger diameter, but a 45 ain't going to shrink

Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.
- Winston Churchill
 
Posts: 5077 | Location: USA | Registered: 11 March 2005Reply With Quote
Oxon
One of Us
posted Hide Post
quote:
Originally posted by jwp475:
You will have to try the 320"s to see if they regulate in your Double, they did in Jack and Shown's Doudles


Yep, I know I'll have to try but:

Can anyone suggest a load that I can start with?


Oxon
 
Posts: 323 | Registered: 27 November 2009Reply With Quote
500N
One of Us
posted Hide Post
Oxon

I don't know what powders you use but the powders we use over here are sold in the US under another name (I can never remember which is which so won't post on this)


Have a look at the ADI reloading manual.
It has loads for 300gns so 320gns won't be much different.

http://www.adi-powders.com.au/...ders-guide/rifle.asp

Up top is a Powder equivalent page which shows the other powders
including the Hogdon series.

.
 
Posts: 3191 | Location: Victoria, Australia | Registered: 01 March 2007Reply With Quote
jwp475
One of Us
Picture of jwp475
posted Hide Post
quote:
Yep, I know I'll have to try but:

Can anyone suggest a load that I can start with?



Jack used 56.5 grains of 4064 behind the Woodliegh in his Chapuis, that load was too hot for Shawn's Merkel


_____________________________________________________


A 9mm may expand to a larger diameter, but a 45 ain't going to shrink

Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.
- Winston Churchill
 
Posts: 5077 | Location: USA | Registered: 11 March 2005Reply With Quote
  Powered by Social Strata Page 1 2 3 4  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    Is the 9.3x74R ENOUGH gun for Cape Buff?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia