THE ACCURATERELOADING.COM SMALL CALIBER FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
light weight 222 part II
 Login/Join
 
One of Us
posted
I found a 700 BDL in 222 for a donor rifle. Couldn't find a bolt for the Sako. Going with a 0 or 1 contour barrel, 18" or 20". For absolute light weight I was going to buy a plastic blind magazine stock but can't bring myself to do it! I still want a wooden stock. I would like this rifle to end up like a very trim stalking rifle and short forearm. What wood should I be looking for that will be lighter and yet stay straight? Thanks for your help. Gary
 
Posts: 469 | Location: central California | Registered: 26 October 2006Reply With Quote
One of Us
posted Hide Post
I had looked for a sako vixen or a tikka m55 for what kind of rifle.

Try birch it has lower density and is still hard enough.
 
Posts: 3611 | Location: Sweden | Registered: 02 May 2009Reply With Quote
One of Us
posted Hide Post
Have you tried shooting your donor rifle? I'd be curious to see how it shoots.

If your goal is absolute light weight, you are on the right track with a 18" or 20" barrel with 0 or 1 contour. But you seem to be offsetting that goal by choosing the 700 action with a wood stock. I like your choice of 700 action and wood stock, but maybe you'd be better off with a more balanced rifle to match that choice. Obviously this is just a matter of opinion, but a 18" barrel with a 0 concour lines up more with a Model 7 action with a graphite stock. A 22" barrel with a more moderate contour seems like a better balance.

Good luck and have fun with it. The 222 is a great cartridge and I'm sure whatever rifle setup you choose it will shoot well.
 
Posts: 519 | Registered: 12 November 2007Reply With Quote
One of Us
posted Hide Post
You probably want beech, not birch (don't know that you can find birch for a stock) and beech may even be heavier than walnut. To go light AND accurate, you will probably need a "good" plastic stock.
 
Posts: 260 | Location: Albuquerque | Registered: 25 March 2007Reply With Quote
new member
posted Hide Post
you could try to find a model 7 in 222 lightweght and accurate i have one and seen two more believe made first year only
 
Posts: 12 | Location: fairfield texas | Registered: 17 January 2006Reply With Quote
One of Us
posted Hide Post
As far as a lightweight action, I would have thought that the CZ527 in 222 would have been an excellent place to start, light weight with a pretty nice trigger. FS
 
Posts: 698 | Location: Edmonton Alberta | Registered: 18 January 2005Reply With Quote
one of us
posted Hide Post
Don't use Birch or Beech, neither is a good wood..You can find a nice piece of walnut that is feather light if you shop around..I have one that I have been saving for such a project. Its a decent piece of Turkish that for whatever reason its extremely light..It would be beautiful with a deep red alkanet dye finish.

I would not go with a blind magazine, it has no benifit and you don't save any weight in that small caliber..Also don't go overboard on light, keep it up around 5 to 6 pounds are it will be to light to hold steady, especially offhand..Keep it a tad barrel heavy.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42221 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
Is bamboo an option?


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27615 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
One of Us
posted Hide Post
Just go find a L-46 Sako preferably w a 1/14 twist&a smallish scope.
 
Posts: 877 | Location: Louisiana | Registered: 03 June 2005Reply With Quote
One of Us
posted Hide Post
Here is one I've found will go just about anywhere and is a pleasure to carry.
Its a Sako Riihimaki in 222. My idea of a perfect "walking varminter".



It does have a 1 in 16 twist, but have now shot sub inch groups at 100 yds up to 52 grainers. It also likes the 45 gr. Barnes TSX which in a pinch would do for hogs and deer if correct shot placement was an option. I was sitting in a tripod on this particular afternoon, but the piggies did not show up.

GWB
 
Posts: 23752 | Location: Pearland, Tx,, USA | Registered: 10 September 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Nordic2:
I had looked for a sako vixen or a tikka m55 for what kind of rifle.

Try birch it has lower density and is still hard enough.


more stable, also- or is that beech I'm thinking of?
 
Posts: 3314 | Location: NYC | Registered: 18 April 2005Reply With Quote
One of Us
posted Hide Post
Two birds were arguing as to whether a tree was a son of a beech or a son of a birch. They called in a specialist--a woodpecker. He sampled the specimen and said that's the finest piece of ash I ever stuck my pecker in.
 
Posts: 3811 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
one of us
posted Hide Post
Geedubya,

You couldn't have made a better choice..Try the 60 gr. HOrnady SP or HP on pigs and deer, it works like a charm.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42221 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
posted Hide Post
For a light weight 222 I use a Rem 600. Put it in a Wildcat synthetic stock, put a Leoupold 2-7 on top. Makes for a nice light weight walk around rifle. - dan


"Intellectual truth is eternally one: moral or sentimental truth is a geographic and chronological accident that varies with the individual" R.F. Burton
 
Posts: 5285 | Location: Alberta | Registered: 05 October 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia