THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
375-338 anyone ????
 Login/Join
 
one of us
posted
I am looking into a wildcat using a standard length action and a 375 barrel. I checked my sources and could not find anything on one using inexpensive brass ie:338 Win Mag. Am sure I read of one once apon a time. Any ideas would be appreciated.

Good luck and good shooting,
Eterry


Good luck and good shooting.
In Memory of Officer Nik Green, #198, Oklahoma Highway Patrol Troop G...Murdered in the line of duty 12-26-03...A Good Man, A Good Officer, and A Good Friend gone too soon
 
Posts: 849 | Location: Between Doan's Crossing and Red River Station | Registered: 22 July 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
yes.. this link will take you to a 416 taylor page. then click on reloading data, and you'll get 375/338 reloading data

http://www.geocities.com/bw_99835/

another good source is to go to ch4d and browse through their dies.

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39874 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of MuskegMan
posted Hide Post
Yep, got one. It's on a M70 PF with a 21" barrel. Been handloading it for 4-5 years now. Mostly a one bullet pony - 300 gr partitions. Some 270 grain bullets too.

MM


 
Posts: 2097 | Location: S.E. Alaska | Registered: 18 December 2003Reply With Quote
One of Us
Picture of El Deguello
posted Hide Post
quote:
Originally posted by Eterry:
I am looking into a wildcat using a standard length action and a 375 barrel. I checked my sources and could not find anything on one using inexpensive brass ie:338 Win Mag. Am sure I read of one once apon a time. Any ideas would be appreciated.

Good luck and good shooting,
Eterry


I believe that round is usually referred to as the .375 Chatfield-Taylor, or something like that. It will duplicate .375 H&H ballistics in a standard-length action.


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
 
Posts: 4386 | Location: New Woodstock, Madison County, Central NY | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
Mine was built on a M1999 action, 23" Shilen #4 barrel, Borden Rimrock stock. It will send a 260-270g bullet comfortably downrange over 2700fps. Groups around 1 inch all day long. Brass is easily formed from .338 WM. You can have mine if you can pry it out of my cold, dead fingers.....

MKane160


You can always make more money, you can never make more time...........LLYWD. Have you signed your donor card yet?
 
Posts: 488 | Location: TN | Registered: 03 January 2004Reply With Quote
one of us
posted Hide Post
quote:
Have you signed your donor card yet?



MKane,
Yes, the whole family has. A shame that so many others aren't even aware.

Now, back to guns.

DB
 
Posts: 1370 | Location: Home but going back. | Registered: 15 December 2003Reply With Quote
one of us
posted Hide Post
Thanks for the info guys, I am still pondering the 375 ackley improved vs 375 taylor. Both seem to produce H&H or very near velocities, so which would you choose and why ????

Both are wildcats so dies and reamers will be deciding factors probably. My situation is I am lefthanded and am looking for a left hand remington or savage action to barrel. I am working on a 416 taylor from a savage 110 LH, and have a 375 a&b barrel on order. Thanks for the advise.

Good luck and good shooting,
Eterry


Good luck and good shooting.
In Memory of Officer Nik Green, #198, Oklahoma Highway Patrol Troop G...Murdered in the line of duty 12-26-03...A Good Man, A Good Officer, and A Good Friend gone too soon
 
Posts: 849 | Location: Between Doan's Crossing and Red River Station | Registered: 22 July 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Eterry,
One shouldn't assume that wildcat means "no way is it available without special order and a hassle".. that's in days long before the internet, and we have ability to have exactly the same datum

Pac-nor has these reamers
http://www.pac-nor.com/wildcat/

and you can call, ask which print they are using, and then call ch4d for dies in that print.

or,
2 phone calls
1 inbound fax
1 outbound fax.

pretty quick and easy

besides, we are having this conversation IN the wildcats forum...

don't want a wildcat 375, then get a 376 steyr.. i have one built and one in the works


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39874 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
I've been really enjoying shooting mt 375 Whelen AI (Shilen #3 23" barrel on a 98 VZ-24). I'm getting 2550 with the 260 Accubond using 56.5 g H4895 (no pressure signs at all) and it's a true 1" gun even with a fixed 3x scope. I form brass from winchester '06 cases (cheap) in one pass over a redding tapered expander and fireform. It's about 150 fps slower than the 375 Taylor but I get 5 down and it is a pleasure to shoot. Dies were $100, Redding. You might also consider the 375 Hawk, same ballistics but headstamped brass is available (not sure of its quality). Reamers are readily available.

The cheap option would be, as Jeffe said, the 376 Steyr. Brass is cheap as are dies and it looks to be a great round, you'd have to do some bolt and rail work on a standard action---my Whelen feeds like a dream from a bone stock military action FWIW.


Jay Kolbe
 
Posts: 767 | Location: Seeley Lake Montana | Registered: 17 April 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Eterry:
I am looking into a wildcat using a standard length action and a 375 barrel. I checked my sources and could not find anything on one using inexpensive brass ie:338 Win Mag. Am sure I read of one once apon a time. Any ideas would be appreciated.

Good luck and good shooting,
Eterry


That's the .375 Taylor. Some Alaska hunters use this cartridge, since is can launch .375-caliber bullets almost as well as a .375 H&H, and also because .338-caliber brass is cheap and found in any of the stores in town. I believe this is powerhouse of a wildcat, and those who are now using it on BIG game are finding out how great it is. It all translates to having a lighter .375 H&H rifle, since the ballistics are almost identical.
 
Posts: 1103 | Location: Alaska | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
There's not really any advantage over the .375 H&H except if you already have a 7Mag or .338 you can rebarrel it and have a .375 in a handy rifle and minimal cost that's easy to make cases for. Ballistics are the same as the H&H which is plenty good. I could see doing one on a .338 M70 SuperGrade with the next heavier profile barrel.


A shot not taken is always a miss
 
Posts: 2788 | Location: gallatin, mo usa | Registered: 10 March 2001Reply With Quote
one of us
Picture of Fjold
posted Hide Post
Also, Midway had properly headstamped brass if you hunt in Africa in areas that require that.

I almost went that way with a 7 mag Ruger that I have but found a left handed 375 H&H.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12729 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
one of us
posted Hide Post
My A&B barrel arrived from midway yesterday, so I will be looking hard at my options. I like the idea of the 376 Steyer, but also the simplicity of the 375 Whelen/AI.......decisions decisions.

Good luck and good shooting,
Eterry


Good luck and good shooting.
In Memory of Officer Nik Green, #198, Oklahoma Highway Patrol Troop G...Murdered in the line of duty 12-26-03...A Good Man, A Good Officer, and A Good Friend gone too soon
 
Posts: 849 | Location: Between Doan's Crossing and Red River Station | Registered: 22 July 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
The .375 and even .416 Taylor are excellent wildcats and are very powerful duplicating performance of longer cartridges.

If there's a problem with them its resale.....All wildcats suffer this problem and in the long run one is better off just buying the .375 H&H in the first place. That gun can be moved later if you wish.

I have a M-70 in .338 Mag and look at it as a Taylor many times.....and in the end I can buy the .375 for less than the cost to convert and I do all my own work.

Be your own judge.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia