THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
375 wsm
 Login/Join
 
One of Us
Picture of boom stick
posted
how many here have this one? was thinking of a stainless 300 wsm browning blr conversion. i was thinking of the 375-338 in the blr but according to browning this is a no no. dont know if it is b.s. or they just dont want to be liable or both. so i am looking at other avenues and came accross this one. i found a shot show special stainless 300 wsm and was considering the conversion. what do you guys think?


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27615 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
posted Hide Post
The 375/338 is to long for the action. The 375/300wsm should give you 2450fps with a 300gr bullet if the action will take the pressure. Don't know about feeding.


DB Bill aka Bill George
 
Posts: 4360 | Location: Sunny Southern California | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
I think Broom stick meant a 375 Taylor, a necked up 338 winnie.
 
Posts: 1111 | Location: Afton, VA | Registered: 31 May 2003Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
I'd stick to the .375 Taylor idea personally..... Not sure why Browning poo poo'd the idea.....there's no difference in the cartridges .338 mag and .375 Taylor that the rifle will ever know.

Have you asked a smith that can do the work to quote the job for you?

I assume that you've forewarned that that rifle in .375 Taylor will kick the living snot out of you.?????


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by vapodog:
I'd stick to the .375 Taylor idea personally..... Not sure why Browning poo poo'd the idea.....there's no difference in the cartridges .338 mag and .375 Taylor that the rifle will ever know.

Have you asked a smith that can do the work to quote the job for you?

I assume that you've forewarned that that rifle in .375 Taylor will kick the living snot out of you.?????


Well, the .375 taylor would be some sort of short Magnum I would think, except that is is not fat and has a belt. Other than that, it's an outstanding wildcat.
 
Posts: 1103 | Location: Alaska | Registered: 04 January 2005Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
the tech at browning said there would be too much preasure but didnt go into the exact reasons why, he sounded like he was being inconvenienced by my call...jerk. anyway, i said they were the same preasure carts and he again sounded anoyed by my question. is he thinking that pushing a larger caliber is going to create more preasure? maybe he is the one who needs some learning. i wanted to go stainless and if i go the short mag direction i could get a stainless shot show special short mag laminated stock nickel receiver one and be about 50 to 75 fps slower than the 375-338. not bad...yes i realize the recoil would be stiff but my 45-70 guide gun is my favorite so i dont immagine it could be much worse than heavy +P in that.

and sabot... its BOOM stick...i dont belong to a coven


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27615 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
posted Hide Post
This is the wildcat forum! I say get yourself a 375-6.53x Scramjet x2.5! AKA 375 Newton.
Seriously, the WSM may be too think for the barrel tenon, front ring, and bolt lugs. I don't know.
If it CAN handle the .555" dia case, I'd go with a 375 Dakota. The stress and bolt thrust will be the same as the WSM (a little less, actually) but the powder room and muzzle speed will be greater per MOP.
 
Posts: 2000 | Location: Beaverton OR | Registered: 19 December 2002Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
the tech at browning said there would be too much preasure but didnt go into the exact reasons why


bull
The thrust the action will resist is the same with a .375 Taylor as with a .300 Win Mag.
Get a smith to quote you a new barrel in .375 taylor.

It's all you have to do.....a simple change for a smith that is capable of rebarreling a BLR.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
which smith on this forum do you suggest? send me a p.m. if you dont want to incriminate yourself and start a flame war Big Grin


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27615 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
which smith on this forum do you suggest? send me a p.m. if you dont want to incriminate yourself and start a flame war Big Grin



I'm not at all familiar with California.....open the yellow pages there and get quotes.

I have a friend that does it as a business....I'll ask him if he wants the job.....I don't do any smithing for hire....strictly as a hobby.

lemme guess
barrel and contour to match original...$300
chambering reamer and labor............$250
rebluing and testing...................$150
shipping...............................$30

a little over $700 is my guess.....let me know what you're quoted.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
that sounds about right...but i have to wait till spring on this project Frowner


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27615 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
posted Hide Post
This thread has been quiet for a while, but what the hell. Check out Pac-Nor barrels. They can do it for you for around $550 I believe. I have used their barrels and they have been good for me.
 
Posts: 866 | Location: Western CO | Registered: 19 February 2004Reply With Quote
one of us
posted Hide Post
OK, I'm confused. Did the smith tell you not to chamber the 375-300 WSM in it, or the 375 Chetfield-Taylor?
If they are already chambered in the 300WSM and the 338 WinMag, there is no reason you can't change the caliber in an otherwise similar cartridge.
I didn't realize they already chambered the WSM.
Whoever you talked to either misunderstood or was talking out his ass.
 
Posts: 2000 | Location: Beaverton OR | Registered: 19 December 2002Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
quote:
Originally posted by Bwana-be:
OK, I'm confused. Did the smith tell you not to chamber the 375-300 WSM in it, or the 375 Chetfield-Taylor?
If they are already chambered in the 300WSM and the 338 WinMag, there is no reason you can't change the caliber in an otherwise similar cartridge.
I didn't realize they already chambered the WSM.
Whoever you talked to either misunderstood or was talking out his ass.


i thougt i smelled something funny roflmao


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27615 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
it seems the most smack down that would fit the catagory i need is the lazzeroni hell cat (375) but i dont know if it will fit in the blr. man that would be a killer mgun but to get an extre 100 fps i dont know if i would go there but i guess i could start off with the 375 wsm

have you guys heard much abouth the 475 lilmufu?


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27615 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
posted Hide Post
The WSm won't get you anything over the C-T. Except more case-forming issues and higher bolt-thrust, more expensive dies and reamer maybe.
If there's any point to the WSM it is so it will fit. But if you can already get the gun you like chambered in 300 WM, just rebarrel that and be done!
If you like faster, the 375 Dakota or similar design (wouldn't cost any more than a WSM wildcat) would get you lots more room over either, with a little less bolt thrust than the WSM, and nowhere near the Lazzeroni.
Check out the ballistics. Me think you likey.
 
Posts: 2000 | Location: Beaverton OR | Registered: 19 December 2002Reply With Quote
one of us
posted Hide Post
boom stick ---you have a PM


DB Bill aka Bill George
 
Posts: 4360 | Location: Sunny Southern California | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia