THE ACCURATERELOADING.COM VARMINT HUNTING FORUM


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
Bipod Recommendation
 Login/Join
 
one of us
posted
Hi,
I want a bipod for my 308, and was wondering what the range of opinions was out there. I am thinking of a 9-13" for prone. The 2 brands I have been considering were Harris and shooters ridge. Any thoughts.

Thanks
Mike
 
Posts: 198 | Location: Oregon | Registered: 05 September 2002Reply With Quote
one of us
posted Hide Post
micmac, I use the 6-9" Harris on my 'dog' shoots, works well off the bench as well as prone


I believe in life, liberty, and pursuit of the S.O.B.'s that threaten them.
 
Posts: 130 | Location: East central Kansas | Registered: 18 September 2004Reply With Quote
One of Us
posted Hide Post
Mike I would no doubt go with the 9-13" model. I've got two Harris in that length and I love them.

I do like Harris and have not used the other brand you mentioned. Harrris owned the market share for eons and now there are some other companies making them.

Good luck and good shooting

Mark D
 
Posts: 1089 | Location: Bozeman, Mt | Registered: 05 August 2005Reply With Quote
One of Us
Picture of smedley
posted Hide Post
Harris with swivel option for uneven ground.

Smedley


______________________

Smedley

______________________
From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.'
B.H.Obullshitter
------------------------------------
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"
Winston Churchill
------------------------------------
"..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams
------------------------------------
Facts are immaterial to liberals. Twisted perceptions however are invaluable.
------------------------------------
We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please.
 
Posts: 3242 | Location: Cruising through the Milky Way at 98,000fps | Registered: 03 October 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Mark Dobrenski:
Mike I would no doubt go with the 9-13" model. I've got two Harris in that length and I love them.

I do like Harris and have not used the other brand you mentioned. Harrris owned the market share for eons and now there are some other companies making them.

Good luck and good shooting

Mark D



I'm also bipod shopping and either the 9-13" Harris or the B-square are on my short list.
and I'm leaning towards the B-square because it's only $35 from Cabela's, but I want to know where it's made first...

AllanD


If I provoke you into thinking then I've done my good deed for the day!
Those who manage to provoke themselves into other activities have only themselves to blame.

*We Band of 45-70er's*

35 year Life Member of the NRA

NRA Life Member since 1984
 
Posts: 4601 | Location: Pennsylvania | Registered: 21 March 2005Reply With Quote
one of us
posted Hide Post
I've shot off of Harris bipods for years and they're second to none... except in price. You can't tell the difference between my new Shooters Ridge (formerly Outers I believe) and the Harris. Go with the Shooter's ridge, the only thing that'll know the difference is your wallet.
 
Posts: 852 | Location: Austin | Registered: 24 October 2003Reply With Quote
One of Us
Picture of AI22-250
posted Hide Post
I've got the longer Harris, it collapses to about 13" I think. It's a little to long for prone shooting, but I'm a tall fellow, so the height off the bench is fine for me, also sitting in a blind for coyotes with it is just about right with it extended.
 
Posts: 289 | Location: Holladay,UT (SLC) | Registered: 01 June 2005Reply With Quote
One of Us
Picture of thornell
posted Hide Post
Harris!
 
Posts: 705 | Location: MIDDLE TENNESSEE | Registered: 25 June 2005Reply With Quote
One of Us
posted Hide Post
micmac,
For p-dogs the Harris is great. For coyotes & bcats you need a pair of sticks, either Stoney or just wood homemade type. They are better for the uneven ground that is common. They also adjust to different heights. The Harris have springs that play a tune when you move them. The sound just does not make coyotes run in..but away. Many times I stand up when shooting coyotes and use a monopod made from a paint roller extension pole. It adjusts to any length needed. A tall bipod is just not quite as good for coyotes because it is hard to swing for the shot. A tall bipod is great for pdogs and especially big game.

Bottom line is your need several types of sticks.

Good hunting,
JB
 
Posts: 33 | Location: Dana Point, CA | Registered: 03 February 2005Reply With Quote
One of Us
Picture of Flippy
posted Hide Post
I have a Caldwell sitting model on one of my rifles. It is very lightweight and swivels. I also have 2 Harris bi-pods (one fixed, one swivel), and one Shooters Ridge. The Shooters Ridge is identical to the Harris, except that it doesn't swivel. If you want the swivel feature (recommended) spend the extra $20 bucks for the Harris.
quote:
Originally posted by Jeff Buck:
The Harris have springs that play a tune when you move them. The sound just does not make coyotes run in..but away. JB

That is why I bought the Caldwell's---no springs. You can take the springs off and put thin tubing over them to quiet them, or just buy another brand.

Have not tried the Advanced Technology Featherweight (Cabela's), but my next one will probably be a B-Square. I have had problems with the durability of some of their aluminum "no gunsmith" scope mounts in the past, so I am a little leary of their bi-pods. But you never know until you try them all...
 
Posts: 1700 | Location: Lurking somewhere around SpringTucky Oregon | Registered: 18 January 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Kingfisher:
I've shot off of Harris bipods for years and they're second to none... except in price. You can't tell the difference between my new Shooters Ridge (formerly Outers I believe) and the Harris. Go with the Shooter's ridge, the only thing that'll know the difference is your wallet.


There are three things I can say about the shooters ridge:
1)Made
2)In
3)CHINA

The Rock Rest is the same thing, another f'ing chinese copy of a Harris, but the Rock Rest is the supposed brand of another identical made in China copy of a harris that WalMart sells.

AllanD

AllanD


If I provoke you into thinking then I've done my good deed for the day!
Those who manage to provoke themselves into other activities have only themselves to blame.

*We Band of 45-70er's*

35 year Life Member of the NRA

NRA Life Member since 1984
 
Posts: 4601 | Location: Pennsylvania | Registered: 21 March 2005Reply With Quote
One of Us
posted Hide Post
Harris all the way. jjmp
 
Posts: 999 | Location: wisconsin | Registered: 26 April 2005Reply With Quote
One of Us
posted Hide Post
I would buy the harris. I found a "clone" last fall while deer hunting. It is very similar to the harris, but I would rather buy american made.
 
Posts: 86 | Location: Wyoming | Registered: 17 January 2006Reply With Quote
One of Us
posted Hide Post
Definitely the harris swivel model. I also have one of those shooter's ridge bipod and it's the biggest pos.
 
Posts: 149 | Location: western Iowa | Registered: 28 February 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia