One of Us
| I got the best accuracy with Remington RN Corelokts and IMR-4064. I have not used the Sivlertips in reloads. I think a RN lead softpoint in the most classic! (Other than a lead bullet...) |
| | | Posts: 284 | Location: Orange, CA | Registered: 05 January 2005 | 
IP
|
|
one of us
| Hi With 30-30's I have always had the best results using H-335. I give me the best combination of accuracy and velocity.
Why do they call it common sense, when it is so uncommon??
|
| | | Posts: 277 | Location: Grants Pass, OR | Registered: 10 October 2004 |
IP
|
|
one of us
| Try some RL15, about 34 grains with a 170 grain bullets. I shoot Hornadys in my 94. With a good peep sight, these go into 1.5 in. at 100 yards and are 2130 fps.
A shot not taken is always a miss
|
| | | Posts: 2788 | Location: gallatin, mo usa | Registered: 10 March 2001 |
IP
|
|
One of Us
| where are you finding the Silvertip bullets? |
| | |
One of Us
| For the last 10 years or so, I've been using 170 grain Speer FPs over 35 grains of BL-C(2). It's a grain or two below the published max, but it shoots 1.5" groups out of my Marlin 336CS, so I can't complain much. I don't have a clue as to what my MV might be.
I have 100 of the old 170 grain flat point Silvertips that I'm hoarding, but I can't figure out what I'm hoarding them for. Maybe I should load 'em up.
RXM |
| | | Posts: 58 | Location: Billings, Montana | Registered: 13 May 2005 |
IP
|
|
One of Us
| I always shot 35-36 grains of IMR4350 with a 150 grain Hornady round nose , it shot best from my Marlin but i also used the 170 silvertip with 27 grains of H-322. they both shot well. Don
If it cant be Grown it has to be Mined! Devoted member of Newmont mining company Underground Mine rescue team. Carlin East,Deep Star ,Leeville,Deep Post ,Chukar and now Exodus Where next? Pete Bajo to train newbies on long hole stoping and proper blasting techniques.
Back to Exodus mine again learning teaching and operating autonomous loaders in the underground. Bringing everyday life to most individuals 8' at a time!
|
| | | Posts: 3070 | Location: Northern Nevada & Northern Idaho | Registered: 09 April 2005 |
IP
|
|
One of Us
| A 150 gr Speer and 35grs of H-335 does sub MOA in my Win M94 |
| | | Posts: 1547 | Location: Lafayette, Louisiana | Registered: 18 June 2005 |
IP
|
|
One of Us
| Graff's had a free brochure of IMR powder loads. For a small booklet it has a lot of info. I suspect they are available at other reloading centers.
******************
"Policies making areas "gun free" provide a sense of safety to those who engage in magical thinking..." Glenn Harlan Reynolds
|
| | |
One of Us
| I use 34grains of Varget with 150grs Hornady RN. So far that has been a good load for me out of my Marlin levergun
"We are what we repeatedly do. Excellence, then is not an act, but a habit"--Aristotle (384BC-322BC)
|
| | | Posts: 749 | Location: Central Montana | Registered: 17 October 2005 |
IP
|
|
One of Us
| I been using 32.5grs of H335 with hornady 170gr flat points and CCI 200 primers. This load has shot alot of whitetail in different rifless.
I miss hunting in B.C.
|
| | | Posts: 84 | Location: Nova Scotia, Canada | Registered: 28 October 2004 |
IP
|
|
One of Us
| 32.0 of IMR 3031 is a classic load with 170's
I wish you'd try RL15 32.5 grains with 170 Win PP give me genuine 1" groups out of my wifes Stevens 325. Velocity about 2070 out of a 20" barrel and Ican move to 34 grains at max pressures and 2150ft/sec. Accuracy doubles but is still good. |
| | | Posts: 111 | Location: Whitehorse, Yukon | Registered: 13 June 2005 |
IP
|
|
one of us
| I load W-W brass with federal 210 primers, 36.5gr of W748 behind Sierra 150gr round nose bullets. It's accurate and has a muzzle velocity averaging 2310fps from a 20" barrel. |
| | | Posts: 529 | Location: Missouri | Registered: 31 January 2002 |
IP
|
|
One of Us
| 32.0/WW748 + Speer 170 flat point. True MOA in my 1970's Marlin 336A.
Never chronographed it, guessing 2050 - 2100 fps. |
| | |
